BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Water gun for use in inflatable deconatmination shower. No PPE.
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a waterproof membrane, adjustable Velcro strap at the wrist and a pull tab at the cuff with an opening for the carabiner. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.2.1, EN407: X.2.X.X.X.X
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a long cuff, removable liner, waterproof membrane, snow closure, carabiner, wrist fastening and adjustable Velcro strap at the wrist. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.3.1, EN407: X.2.X.X.X.X
Low shoe glove in water repellent black Matryx multi-fibre. With a carbon fibre 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable textile and insole in polyurethane foam. Sole in EVA/Vibram Litebase, resistant to 300°C. Sizes: 38-48.
Long coat 4131 with concealed press stud fastening, 2 inset side pockets, inner pocket, waistband on the back, pleats at the back, split, sleeves with press studs. Quality: 65%/35%, cotton/polyester, 2/1 twill weave, 245gr/m² Available sizes: 38-74 HAV Available colours: White.
Electric isolated earmuff for helmet X5 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 30dB.
Silver coloured, metal glasses frame to click into 3M series 6000 and 7000 masks, corrective lenses not included.
Innershoe, which consists out of a multi-layer textile with membrane. Membrane absorbs wound exudate and doesn't transmit it to the outer shoe. Is white for discovering wounds. Less seams, removable and washable at 60°C. Sizes: 40-48.
Optimized fit that integrates the nylon liner (18 gauge) into the nitrile and neoprene shell for better dexterity & tactility versus double gloving. Excellent dry & wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm. Food approved.
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments.
Buoyancy vest Racing Belt with a buoyancy of 100N: High wearing comfort due to split frontal foam section • All sizes are provided with a crotch strap Separate compartments front panels for extra comfort Fabric: 100% polyester high PE foam Available sizes: S-XL
A safety rope with a detachable and easy to handle floating rope. Floating bag with wide stiffened opening. High visibility color with reflective details. Breaking strength of 10kN.
Women's jacket from the HAVEP® 5 safety image+ collection. This jacket meets 6 standards and is made of cotton/polyester/carbon. Quality: 80%/19%/1% cotton/polyester/carbon, 4/1 satin weave + DWR, 280 gr/m2. Available sizes: S-3XL. Available colours: grey/red. Conforms to: EN ISO 11612 A1A2B1C1E2F1, EN 1149-5, IEC 61482-2 APC 1, EN 13034 Type 6, EN 17353 Type B3.
Compatible with standard USB cable.(1062859)
Stretchable nylon rope for attachment of tools, to prevent accidents caused by falling tools. The rope has an aluminium snap hook and adjustable loop. Length: 0.89 m - 1.1 m.
Adapter for use of Peltor hearing protectors with Centurion 1125 and Vulcan helmets. Does not fit on 30 mm slot. Two pieces per bag.
Sign according GHS normation in self adhesive polyester: oxidising. Size: 100x100mm. 4 labels per card. No PPE.
Sign according GHS normation in self adhesive polyester: flammable. Size: 40x40mm. 20 labels per card. No PPE.
Lanyard, 2 metre length, 43mm width consisting of elastic strap with integratedshock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Fitted with 1 standard carabiner and 1 scaffholding carabiner. Serves as connection between anchor point and harness.
High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.
Hygiene set for hearing protector WS Litecom Pro III and WS Protac XPI headsets. Replacement cup cushions to ensure a proper tight seal for optimum protection, as well as new foam inserts. Each Hygiene kit contains 2 x foam inserts and 2 x cup cushions which can be replaced in a few easy steps. Not certified seperately as PPE.
Motor unit that is worn on the back of the head, for connection with a half or full face mask. Max. air flow: 230l/min. Weight: 450g. Internal battery charging time <(><<)> 2h (up to 95%). Up to 2 hours of deployment time possible. Contents: motor unit, battery, battery charger, carrying case, 2x neck support, quickstart user guide, cleanspace smart app. Filters and mask need to be ordered separately.
CPR-D·padz® electrode set with resuscitation sensor, excl. Preparation kit Contents: 1 Pair - Shelf life: 60 months. Suitable for the Zoll AED Plus semi-automatic (1060426) or the Zoll AED Plus fully automatic (1060427).
High shoe in suede leather/mesh. Provided with an aluminium 200J toe cap and a synthetic antiperforation sole. BreathActive lining. Outsole in PU/TPU. Removable, polyurethane insole with textile layer. Sizes: 39-47.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Respirex PRPS Powered Respirator Protective Suit in Tychem-TK material complete with Malina Chemical power unit, heads up display, single use battery and pair of Operational filters (Electrical components are approved as intrinsically safe to classification Eex ib llB T3). Each suit is equipped with modified “Camelbak” re-hydration pack, Peakless safety helmet, Thermal socks, inner cotton gloves and Airflow indicator tube all contained in a stowage / carrying case. Suits are labelled with a Serial Number. Available in sizes Small, Medium, Large, X-Large and XX-Large. Included in the box: - Gas tight locking cuff and Kemblok glove - Gas tight zip and Velcro style flap for re-use plus free issue tally - Gas tight seam construction certified to EN 464 - Respirex waist support with one EPD dose meter support - Respirex re-hydration pack - Re-hydration suit extension including disconnect couplings - Light blue secured storage box (riged type) with unique serial number including ensemble log book - Hazbag cable tie and label (Tyvek F) - One pair cotton gloves - One pair Thermal socks - Battery pack (Primary 4 hours) (sealed and included in box) - Set of two CBRN canister (sealed and included in box)
High vis t-shirt 7518 with short sleeves, class 1.
Hi-vis sweat jacket 4517, class 1.
Full-face mask specially designed for the Cleanspace Work system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Face shield in clear acetate with a thickness of 1.1mm. Has a curved chin bar for better protection against liquid splashes. Size: 205x205mm. Provides protection against impact, liquids, UV and molten metal.
Sustainable high-vis stretch trousers with craftsman features and extra stretch panels at the waist for superior comfort. Full 4-way stretch from bio-based and recycled materials provides optimal freedom of movement. Reinforced in exposed areas.
Sustainable and lightweight high-vis trousers with stretch panels at waist for extra comfort. Ideal for service and logistics. Made of organic cotton and recycled polyester.
Container anchor post (lenght: 92,5cm) intended as a temporary anchor point for work on top of ISO shipping containers (10ft, 20ft and 40ft). Comes with a side latch and marker line for safe 1-person installation. can also be used to attach a horizontal lifeline to the top of the container. Always to be used in combination with a harness and fall block. Static strength: 12kN, minimum breaking strength: 15kN.
JALTOPAZ from the J-QUARTZ range by Jallatte is a low safety shoe with a Putek Plus upper. It is antistatic, has a J-Quartz polyurethane sole equipped with the JAL’GRIP system, a composite Xetane B safety toe cap, and a puncture-resistant sole s. EN ISO 20345:2022 35 - 48
INUTEQ-H2O® Bodycool 2BSafe is an ISO20471 Class 2 evaporative cooling vest with high visibility for maximum safety.
Unisex crewneck sweater with a comfortable fit, 2×1 ribbed collar, cuffs and hem. Made from 80% OCS certified organic cotton and 20% RCS certified recycled polyester.
Sportive goggle in clear polycarbonate. Headband is made out of recycled materials. The uvex i-guard+ with its highly flexible frame ensures the best protection – and adapts individually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,18kg CO².
Welding goggle with panoramic view and ventilation, fits over most corrective glasses. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
Neoprene rubber overalls. These overalls have adjustable suspenders and the pant legs have Velcro closures. Available in: yellow. Si zes: S - XXL.
Liquid-proof gloves made of jersey coated with high-quality neoprene. High mechanical resistance and resistant to a wide range of ch emical products.
Test liquid for performing fit test. Content: 55 ml.
Fire alarm. Fire action sign in polypropylene. Dimensions: 200x200mm.
Fire alarm. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of OP quality .
Hearing protection required. Mandatory sign in polypropylene. Diameter: 200mm.
Spill kit for small- to medium-sized calamities. The chemical and water resistant can contains the materials, which makes it ideal f or outdoor storage. The container can be used to transport the used material. Content: 12 pads (41 x 51 cm), 3 socks (7.6 x 366 cm), 2 pillows (43 x 48 cm), 1 pair of safety glasses, 1 pair of gloves, 3 disposal bags and 1 emergency response handbook. Absorption c apacity: 59 litres. The absorption material in the spill kit is of MRO quality.
Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: width 50mm, height 43mm.
Glass for bochumer glasses in blue neotherm glass. Suitable for melting furnaces. Dimensions: 60x120mm
Machine Safety sign - Please beware of hand injuries in self-adhesive polyester. Side Dimensions: 050mm. Not PPE.
Machine Safety sign - Please beware of hand injuries in self-adhesive polyester. Side Dimensions: 200mm. Not PPE.
Fire protection sign - Fire alarm in self-adhesive polyester. Dimensions: 100X100mm. Not PPE.
Absorbent pads on a roll measuring 96 cm x 44 m. These heavy-weight perforated pads on a roll are packaged in a box. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 213 litres.
First Aid box, white painted metal, with lock and key. With 3 shelves of which 2 adjustable. Dimensions: H.46 cm, W.30cm, D.14cm With 2 holes to secure the box against the wall. Application: Industrial buildings, First aid rooms. Not PPE.
Absorption roll x 30, diameter 7.6 cm x 122 cm. 100% polypropylene. Chemically inert, green padded absorbent, absorbs 16 times its weight in chemicals, water or oil, capacity 120 litres, weight 114 kg.
P1 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
High quality P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
Equipped with 2 large self-closing aluminum hooks (23kN) and 1 standard aluminum hook (25kN). Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Outdoor cabinet Rotaid Solid Plus with alarm. Suitable for the following AEDs: Primedic HeartSave Y semi-automatic (1060424), Primedic HeartSave YA fully automatic (1060425), Zoll AED Plus semi-automatic (1060426), Zoll AED Plus fully automatic (1060427), Zoll AED 3 semi-automatic (1060428) and the Zoll AEd 3 fully automatic (1060429). Outdoor cabinet seal 10 pieces (1040730).
Adapter for mounting sealed block on davit arm.
The N-Ferno® 6860 Winter Hard Hat Liner has 2 layers of insulation with a FR modacrylic/cotton blend shell and a soft polyester fleece lining for exceptional warmth. This lightweight thermal liner is chin-length to keep head and ears covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant.
Stainless steel wall holder for box of disposable gloves. Dimensions: width 255mm x Height 132 mm x Depth 85 mm.
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
Eye-catching, signal red galvanised 20L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with an amber polycarbonate lens with a antivapor and anti scratch coating.
