BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
Low shoe S2 in water repellent microfiber (partially Fashmo, partially Cordura) with 200J synthetic toe cap. Lining in breathable fabric. Outsole in TPU/PU with SRC and ESD certification. Removable black insole with ESD caracteristics. This shoe is 100% non-metallic and does not contain any leather. Sizes: 35-47.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Hi-vis Raincoat and Rain Pants. 50% Polyester/50% PVC, 110 g/m², With reflection. Raincoat: Hood with drawstring. Sleeves with adjustable Velcro closure. Two outside pockets. Rain pants: Elastic at the waist. Highly flexible seams. Two side pockets. Available colours: fluorescent yellow, fluorescent orange. Available sizes: XS-5XL. Complies with: EN 343 3.1.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Sturdy gloves in 100% black nitrile with rolled edging. Fully powder free. Length 240 mm, thickness 0.12 mm. Sizes: 5.5-6 / 6.5 -7 / 7.5-8 / 8.5 - 9 / 9.5 - 10.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Orange Hiviz winterlined glove with seamless acrylic liner, water thight and fully latex dipped. Sizes: 8-11.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Hi-vis waistcoat in 100% polyester (120g / m²). Horizontal and vertical reflective tapes, velcro closure. Available sizes: M-3XL. Available colors: royal blue, red, rose, lime, white.
Top layer: towelling made of 85% viscose of bamboo and 15% of polyester, weight 230 gr/m². Bottom layer: 50% elastomer-latex and 50% cocos fibre, with a weight of 550 gr/m². The top and bottom layers are connected with a polyurethane foam density 25 kg/m³ Fresh, soft and absorbs perspiration. Sizes: 36-49.
Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: flacon 100ml.
Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
Flame retardant and antistatic long sleeve t-shirt in Cantex Jersey AT (59% modacrylic/39% cotton/2% antistatic) (190g/m²). Round neck, ribbed cuffs, heat sealed segmented reflection striping. High visibility yellow accents on shoulders for better visibility. Available sizes: XS-4XL. Available colours: navy/hi-vis yellow.
Functional layer 3 wind- and water repellent softshell jacket. Quilted padded lining. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Jeans with hidden zipper, 2 wide side pockets, 2 large back pockets, 1 with flap, loose ruler pocket with mobile phone pocket, large hanging hip pocket with flap and extra tool pockets, easily accessible Cordura® knee pockets with opening at the top closed with flap and Velcro, triple stitched seams in vulnerable places for extra long life, pre-formed trouser legs for very good fit, wide belt loops, adjustable hammer loop. push button, highly breathable stretch fabric (polyamide / Lycra) in the back of the knee for optimal wearing comfort, 1 D-ring for badge holder and reflective piping. Quality: 66% / 30% / 3% / 1% recycled cotton / cotton / polyester / Lycra, 407 gr / m2. Available sizes: 33-38. Available colors: Navy.
Dust mask, class P3, for toxic dust. Disposable respirator with a lightweight cup featuring EVA foam under the adjustable nose bridge for extra comfort. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with elastic headbands. NPF: 50.
Safety glasses in clear PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
Jacket, 100% polyester, 150 gr./m², water-repellent finish, 100% thermal polyester filling 300 gr./m², insulating, lined hood, padded collar, two patch pockets with flap, patch breast pocket with flap and ID pocket, zip with storm flap and velcro, tricot cuffs, 1 horizontal reflective stripe on chest and back, water vapor permeability and even at temperatures between 5 ° C and -40 ° C. Available in: navy. Suitable for cold stores and cold stores. Sizes: S - 3XL.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Low-cut safety shoe, type city model, lightweight and elegant, in high-sheen leather, fitted with a steel toecap and synthetic antip erforation midsole. Liner in leather tanned with natural oils. The shoe meets the ESD requirements and can therefore also be used in work areas where static charge build-up may not exceed 35 ohms. Outsole in rubber: slip resistant, high wear resistance and optimal heat resistance to 220°C. Sizes: 39-48.
Spare blades for safety cutter Klever X-change (1018439)
"Winter bomber jacket with detachable sleeves, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multi-functional jacket with detachable sleeves and fleece lining, taped seams on the inside, extended back, Straight collar, foldaway hood in collar Zip closure under flap with touch <(>&<)> close fastening, 1 Patched chest pocket with zip closure, 2 Inset pockets, 1 Phone pocket, sleeve pocket + penpocket(s), 1 Mica pocket, detachable sleeves, elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, elasticated at the sides of the waist, back length 75 cm (L), fixed lining:polyamide in body + quilted sleeves, 1 Inside pocket, zipper in back lining for placing logos, detachable fleece lining in body, 1 Patched pocket.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
Labjacket with velcro closure without pockets, 30g/m². Available sizes: L-XXL. Available colour: white
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable lin er in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 37-47.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Fully coated PVC/NBR, water, and oil resistant, with chemical protection. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Sizes: 7-12. Conform: EN388:2016 4.X.3.1.C.P, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMPT, EN374-5:2016:VIRUS
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs. Suitable for: agricultural and food industry.
Terylene suspension with ratchet & Drytec sweatband, suitable for Centurion Concept, Spectrum, Vision Plus and Nexus Core.
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. A bsorption capacity: 18 litres.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Grey safety goggles type Skylite with soft orange DCT element. Offerscomfort and a profound protection. Adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and has an anti-slip temple and branches. Ventilated. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating. Protective bag included.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRA antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
The DX4 Hi-Vis Softshell is designed using a revolutionary breathable, waterproof and windproof ripstop fabric. The sport-inspired design includes a longer back length, dynamically shaped sleeves, adjustable cuffs, reflective piping and multiple pockets for ample storage.This softshell is made with premium HiVisTex Pro tape and offers excellent freedom of movement thanks to its segmented construction. Outer fabric: 92% polyester, 8% elastane, laminated to 100% polyester micro polar fleece 310g Lining of the fabric : 100% Polyester Mesh 165g Contrast Fabric : 92% Nylon, 8% Elastane Standards EN ISO 20471 Class 3 RIS 3279 TOM Issue 2 (Orange Only) Waterproof / Breathable WP 8,000mm, MVP 3,000g/m²/24hr
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Not PPE.
High shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable GEOX and active carbon activated antibacterial insole. Insole EVA + TPU/Nitrile, resistant to 300°C. Sizes: 35-48.
Comfortable and lightweight slim-fit work trousers: - Increased back - Ideal for logistical work - Various storage options - Adjustable in taillle Quality: 65% polyester / 35% cotton, 245g / m². Available sizes: 42-66. Available colors: navy, royal blue and red.
J-Energy series. Low shoe in Putek PLUS textile with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-mesh. Outsole in PU/E-TPU/PU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Safety boot in PVC with nitrile non-slip sole. The boot has a steel toe cap in compliance with standard EN 20345. The boot is resistant to hydrocarbons, animal fats and vegetable oils. The Guardian is very flexible and can be used in cold conditions. Sizes: 37-47.
Polar Fleece 300 gsm, 100 % polyester,300 gsm, short-cropped and combed anti-pilling fleece, set-in sleeves, tone-on-tone full zip, pockets with zip, adjustable hem with elasticated cord pull and stoppers, easy to decorate.
Line without damper 1.5m with 1 large automatic carabiner hook and 1 automatic carabiner. Only suitable for positioning.
Chin strap, 4-point, for Iris II and Kara helmets. Features a chincup and velcro.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate grey lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
The Sweater Mulitnorm from the Tricorp Safety collection is made of 60% modacrylic, 39% combed cotton and 1% carbon with a canvas weight of 280 gr / m2. This product is EN ISO 11612 (heat and flame protection) and EN 1149 (protection against electrostatic properties) certified. Quality: 60% Modacryl / 40% Combed cotton, 280 g / m². Available sizes: XS-7XL. Available colors: Marine. Conforms to: EN ISO 11612 and EN 1149.
Classic and comfortable polo shirt PPK180. Quality: 100% cotton, 180 g / m². Available colors: navy, white, red, royal blue, gray melange, gray anthracite and green. Available sizes: XS-7XL.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray. Available sizes: XS-2XL. in line with: EN 1149, EN 13034, IEC 61482, EN ISO 11611 (front class 2) and EN ISO 11612.
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
Reflective cone made of polyvinyl chloride, for cordoning off areas and traffic control. Perfectly visible, both day and night. Equipped with sturdy non-slip base. Length: 50 cm. Colour: orange/white.
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
