BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Flame retardant long sleeve T shirt with round neckline, reinforced neck and shoulder seams, and cuffs. Made from 60% modacrylic, 39% cotton and 1% antistatic.
Trousers 80572 multirisk.
Unisex Hoodie mit weichem, bequemem Schnitt, Kapuze mit Kordelzug sowie 2 x 1 Rippbündchen an Ärmelabschlüssen und Saum. Hergestellt aus 80 % OCS zertifizierter Bio Baumwolle und 20 % RCS zertifiziertem recyceltem Polyester.
KneeBlades are designed for any job where you are required to be on your knees. The high-quality KneeBlades allow for more balance, flexibility, and mobility. The three-wheeled mobile base allows for full 360° turning capability, without lifting from the floor. Close to the ground knee roller design minimizes back stress. With the push of a button, you can go from Knee Blade to knee pad. - Tapered Gel Pad designed to evenly displace weight and lessen pressure on the knee, while fitting the contour of the knee; - Hook And Loop (One Strap) to secure the rolling knee pads comfortably with less tension on the back of your knee; - Durable, lightweight nylon for the most demanding projects Each blade weighs only 3.5 lbs KneeBlades Are Ideal For: Installing Tile Installing Wood Floors Installing Carpet Concrete <(>&<)> Masonry Work Painting Low Places Construction Work Auto Detailing <(>&<)> Maintenance Stocking Shelves Yard <(>&<)> Gardening Clean-Up
Welding goggle with panoramic view and ventilation, fits over most corrective glasses. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
Gas tight suit made of Tychem TK, the most resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has replaceable gloves. The suit is designed to be worn over the compressed air equipment. Delivered in a sturdy bag. Available in: yellow. Sizes: S - XXL. Weight: 6 kg.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
Blue tape for wrapping microphones. Offers hygiene if used by more than one person.
Cloth Lightweight ENV400-M x100 Oil absorbing cloths. Lightweight 41 cm X 51 cm. 100 cloths per box.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Plastic carry bag with belt for protecting half masks against dust and dirt. Can be worn over the shoulder or around the waist. Suit able for: processes involving chemical risks.
Fire extinguisher. Fire safety sign in polypropylene. Dimensions: 148x148mm.
Absorbent pads on 38 cm x 46 m sized roll, sheets perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absorb water and can per manently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and othe r water-insoluble chemicals. Absorption capacity: 94 litres.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 18 litres.
Flexible, chemically resistant PVC sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions:120X120cm to seal: 100x100cm.
Mandatory sign - Safety shoes mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: width 50mm, height 43mm.
Conical earplug easy to fit in the ear. Made of dermatological and moldable foam. Against universal noise.
A2P3 screw filter DIN 148 in plastic housing. Protects against organic gases and vapors with a boiling point >65 ° C, toxic dust, mist and smoke particles. Combinable with half-or volmasker standard threaded or motor unit series PF-600E. Filter Class 2: up to concentration of 0.5%. Weight: 230 gr.
Fireproof storage cupboard for storing hazardous materials, high model with 2 hinged doors fitted with a profile cylinder lock. Powder-coated exterior finish. The interior has a light-chemical-resistant plastic finish. The 2 doors are self-closing and can be easily opened by means of an air spring. The cabinet contains of 3 sheet steel sump trays with load capacity of 150 kg and collection capacity of 33 litres and 1 sheet steel bottom tray with collection capacity of 55 litres. There are intake and exhaust openings at the top of the cabinet (fan as option). The cabinet is 90 minutes fire resistant. Dimensions: 1196x616x1968 mm. Weight 451 kg. Delivery in house is possible on request.
-For breathing apparatus, 6,8L cylinder, mounted mask and demand valve -Outer dimensions: 700x300x520mm -Weight: 4,8 Kg
Polycarbonate replacement visor, for the Iris II.
Model pedestal eye/face wash shall include a green ABS plastic 11" bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include 1-1/4" Schedule 40 hot- dipped galvanized steel pipe and fittings along with powder-coated cast- iron 9" diameter floor flange.
Drench shower for vertical installation shall include a green ABS plastic 270mm diameter showerhead with integral self-regulating 76l/min flow control, chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Stainless steel pull rod with triangular handle. Pictogram SP177 included
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Martor spare knife type 37020.20. PPE Category not applicable.
Create your own lock-out kits by filling the shoulder bag with the locking devices you need. Our lock-out shoulder bag is made of 1000 denier red cordura nylon and has a shoulder strap of 95 cm. Including front compartment with closure and two transparent compartments on the side.
Half ice-grip overshoe made of supple, stretchable rubber for simple attachment over safety shoes. The sturdy metal studs provide a firm, powerful grip and stability on snow and ice. Can be used in temperatures to -40°C.
Dispenser holder for 3 boxes disposable gloves. Dimensions: W: 24,4cm, H: 510 cm
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Refill for mobile spill kit 69L SKO-CART for quick and efficient response to leaks or maintenance projects, anywhere in the factory. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of UN quality.
Light safety spectacles with green Variomatic sunproof lenses and black flexible frame. Lenses coated with uvex variomatic darken within 10 seconds to provide the wearer with 100 % protection against UVradiation, and return to their original tint after 30 seconds - quicker reactions than any other coating. With the Supravision Plus coating: antistatic, scratch resistant on both sides, antifog and antistatic inside and out.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: â–ª High in 1 piece upright closing collar with wide closure. â–ª Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. â–ª YKK anti-panic crystal closure with a waterproof flap and velcro closure. â–ª Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. â–ª Pre-formed 3D sleeves with insert. â–ª Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! â–ª Equipped with external elbow protection and reinforced sleeve ends. â–ª The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. â–ª Extended back for better protection.
Compress, suitable for dressing a leg wound. Dimensions: 12X14CM.
Effective skin protection against water-soluble substances. Stokoderm Aqua stabilises and regenerates the skin barrier and prevents softeningof the skin during damp work and inside gloves and protective clothing.Also an absolute must for frequent contact with water-based substances:water-based oils and cooling lubricants/ water-based solutions of dyes, acids, alkaline solutions, salts, cleaning agents and disinfectants/ cement, lime and fertilizers. Stoko Protect+ 1000 ml. Protection against water-soluble substances. PPE category: not applicable.
Fall arrest block Rebel 15 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 7,5kg.
Safety knive for left- and righthanded. Body in plastic. Metal detectable for food industry. No PPE. Blades: 1034556
Adjustable head harness with contoured air duct, aiflow indicator and sweatband for T-Airline 1000 Hoods
Innovative fit-over frame, flexible temples , visible light transmission: approx. 42% ,color: grün 700-820 DIR LB5 LV CE S (OD5+) 0,01W 2x10E-6J 625-<660 RB1 LV CE S (OD1-2) 0,1W 2x10E-5J 660-675 RB2 LV CE S (OD2-3)
Innovative fit-over frame, foldable temples , visible light transmission: approx. 42% ,color: green 700-820 DIR LB5 LV CE S (OD5+) 0,01W 2x10E-6J 625-<660 RB1 LV CE S (OD1-2) 0,1W 2x10E-5J 660-675 RB2 LV CE S (OD2-3)
Laces, black in polyester. Length: 100cm. No PPE.
Ear muff for helmet with 30mm adapter. The larger cup openings are desgined to fit most earsizes. Exclusive waffled cup foam delivers superior protection. SNR = 31dB. applications. in line with: EN 352-3. !! approved for use in combination with: - 3M Peltor G3000 - Auboueix IRIS 2 - Centurion REFLEX - Kask ZENITH// PRIMERO AIR - MSA V GARD 500 - Schuberth EUROGUARD 6 - Voss INAP MASTER - JSP EVO 2 - Portwest PW 50
This sweater from the Casual line is washable at 60 degrees. The American Fleece material keeps you warm during cold working days. After washing you can easily dry the sweater in the dryer. Fabric: The polo sweater is made of 70% cotton and 30% polyester. Available colors: navy, black, red, royal blue, white and dark gray. Available sizes: XS-5XL.
Kevlar work trousers with concealed zipper, 2 back pockets with snap button, thigh pocket with flap and cell phone pocket, ruler pocket with tool loops, Cordura® knee pockets, hammer loop, Kevlar® thigh reinforcement, reflective piping. Quality: 65% / 35% cotton / polyester, canvas, 320 gr / m2. Available sizes: 44-66, 47-57. Available colors: Black / gray.
Skipper XS unit with 9m length is used without cones or poles, is confirmed by Skipper accessories. Dimensions: 168(H) x 145(D)mm Weight: 700g
A comfortable and functional ladies chef's trousers. The semi-elastic back ensures a good fit and freedom of movement. Equipped with a button and zipper. Other features are the side pockets and a patched back pocket. Characteristics: Durable durable twill fabric, very colorfast; No shrinkage, the clothing retains its shape wash after wash; 3 storage bags; Stuffed back pocket; Side pockets; Semi-elastic waistband for a good fit. Quality: 65% Polyester, 35% Cotton 190g. Available sizes: S-2XL. Available colors: Black.
Hoodie Hi-Vis with full zip: • softshell reinforcements on the front • slim fit for maximum freedom of movement • side pockets with zip • large mesh inner pockets • extra windstopper in the cuff with thumb grip • sealed and segmented reflection bands. Quality: 70% Cotton, 25% Polyester, 5% Spandex. Available sizes: XS-4XL. Available colors: Black / fluo yellow. Conforms to: EN ISO 20471 class 1.
This winter coverall with Arc Protection Class 2 also keeps you visible day and night with its fluorescent colour and segmented reflective stripes. The 6 pockets on the outside are all covered with a flap just like the zipper at the front and at the leg ends, so no water penetration is possible. A hood, available separately, can be attached to the straight collar or stored on the pocket inside. Quality: - 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available colors: Fluo yellow/navy and fluo orange/navy. Available sizes: S-3XL.
Stretch shorts: • stretch material on the seat, crotch and inner thighs; • two leg pockets with zip; • two back pockets with flaps; • hidden button. Quality: 65% polyester / 35% cotton, 245 g / m². Available colors: Black, Navy, Light Blue, Red, Green and Gray. Available sizes: C44 - C62 EU.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
Electrician protective face screen with hood according to PPE-regulation 2016/425 and corresponding to DIN + EN standards (especially DIN EN 166 and GS-ET 29, class 2 (7kA 0,5s) and class 2++ (10kA 0,5s), Light transmission >50% <(><<)> 75% = class 1; CE 0340; With ATPV label 17 cal/cm². Dimensions: Total: 450x250 mm Screen: 250x165 mm Quality: Hood: NOMEX inside antistatic, NOMEX III outershell antistatic Screen: Polycarbonat in line with: EN 166+EN167+EN168:2002-04, EN 170:2003-01 and GS-ET 29:2019-06. Available colours: blue Available sizes: one size
Hi-Vis sweater vest in a supple sweater quality. Concealed zipper. Chest pocket with zipper. Side pockets. Ribbed cuffs. With heat seal reflection. Available sizes: XXS-4XL. Available colours: Fluo yellow/navy and fluorescent orange/navy. Fabric: 80% polyester / 20% cotton Complies with: EN 20471 class 2/3.
Complete work lamp for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01, including light, protective glass, cable / mounting parts and a long cable. No PPE.
Hi-vis sweatshirt PW370: Knitted cloth with brushed back; HiVisTex Pro reflective striping; Ezee Zip; multi pocket; Rib collar and cuff; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 100% Polyester, 280g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S–5XL. Complies with: EN ISO 20471 class 2.
TYVEK® IsoClean® slip-retardant shoe cover option 00 (Bulk packed) Serged seams. Elasticated opening. Slip-retardant Gripper™ sole. White. Available sizes: M and L (M = up to EU 39,5 - L = up to EU 47) For cleanrooms up to ISO 7, GMP C/D. NOT CLEAN PROCESSED. NOT STERILIZED.
Pre filter holder for fan unit SR500 EX.
Protective full face visor for Kask helmets Plasma. Easy to install. Sratch- and fog-resistant.
