BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Flame retardant polo shirt with short sleeves, polo collar with buttons, elastic cuffs and chest pocket. Available sizes: XS-4XL. Available colors: navy. Compliant with: EN ISO 11612 A1B1C1F1, IEC 61482-1-2 Class 1 (EBT: 7.0 cal / cm²), EN 1149-5.
High shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Leather case for Twig One with transparent front and simple to use swivel belt clip mechanism to use either in vertical or in horizontal position.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Hi vis softshell in a breathable and waterproof fabric with PU membrane. 2 side pockets, 1 chest pocket, 1 inside pocket and 1 sleeve pocket. Pulling cord, adjustable cuffs and fixed hood. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Replacement front cover for the flip-up part of the 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01.
- Skin conditioning cream - Non greasy, light formula - Shea butter, alantoin and glycerin for hydratation and care - Perfum free and dye free - Glove compatible - Silicone free - Non-tainting and HACCP assesed formula
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Gel sealing rings compatible with most 3M PELTOR Headsets, featuring a super-thin polyurethane skin with a double-hump top face design and a silicon gel-filled bladder with a Confor foam backing. Not tested separately as PPE.
Cederroth compresses for very fast, first treatment of burns, 10 x 10 cm.
Gas filter A2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. To use with half and full face Sundstrom masks.
Signa waistcoat in 100% polyester (120g/m²). Without reflective bands. Available sizes: S/M and L/XL. Available colours: royal blue, red, lime, white, fluo yellow and fluo orange.
Cederroth soft foam dressing blue 2m works both as plaster and bandage and is suitable for small wounds. Easy to apply to fingers, hands, arms, toes, feet and legs etc. Suitable for all types of small wounds in hot, cold, wet or dry conditions and holds well in water.
TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Hairnet dispenser, stainless steel (30 x 16 x 31.2 cm) This dispenser is ideal for storing hair nets and is made of stainless steel. The dimensions of the dispenser are 30 x 16 x 31.2 cm (l x w x h). Available color: silver
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory. A maximum of 3 people can be connected.
Fall arrest device 'double sharp edge' designed for use on aerial work platform. The dynamic force exerted on an EN28 anchor point in the event of a fall is less than 3 kN. Maximum user weight: 140 kg.
The W6R Work is a powerful, flexible and premium work lamp. This rechargeable work lamp has a light output of 500 lumens and has two light sources: a chip-on-board LED for wide illumination and a spotlight with a focused beam. The lamp can be folded out 180° and has a rotation of 270° for optimal flexibility. In addition, the W6R Work has a built-in magnet and the plastic housing provides sufficient grip. Furthermore, it works on a replaceable Li-ion battery (3.7V, 2500 mAh) that you can easily charge via USB-C. Finally, the W6R Work is splash-proof (IP54) and equipped with "Transport lock" so that you cannot accidentally switch it on. What do you get? The Ledlenser W6R Work, 1x Li-ion battery, a USB-C charging cable and no less than 7 years warranty after online re gistration.
Rechargeable torch with quality light and focus function, natural light (CRI 80) for true colour reproduction and less eye fatigue. Intuitive operation, fully dust- and waterproof (IP68) rechargeable with USB-C. Sustainable housing : 75% recycled aluminium. 2000 lumens, 320m range. Includes: pouch, wrist strap, rubber protection and charging station.
Flame retardant shell jacket for women in a waterproof, windproof and breathable material. Comfortable all-season multi-standard jacket with inherent flame protection. Conforms: EN 61482-1-2 APC 2, EN 61482-1-1 ELIM: 27 cal/cm², EN ISO 11612 A1 A2 B1 C1 F1, EN ISO 11611 A1 A2 class 1, EN 1149-5, EN 13034 Type PB [6], EN ISO 20471 class 2 in sizes XS-S and class 3 in sizes M-4XL and EN 343 class 3/4.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 40x40mm. 20 labels per card. No PPE.
AED sticker (green with white) 10 X 10 CM
The Browguard with slip ratchet can be used to hold a wide range of face shields. Compatible face shields include the S580 (170 mm polycarbonate) / S590 (225 mm polycarbonate) / S591 (225 mm acetate) / S592 (225 mm acetate anti-fog) / S592AEA (225 mm acetate anti-fog <(>&<)> anti-arc) / S593 (225 mm green acetate). You can also choose from face shields S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate anti-fog) which are suitable for attachment of an optional chin piece (S91C) to protect the entire face.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
This PCM CoolOver provides a constant cooling temperature of 6.5°C. The CoolOver is specially designed to improve performance and speed up recovery after exertion.
Fall arrest block in a 3.5m strap, sharp-edged, tested, with external shock absorber. Suitable for vertical and horizontal use and for a maximum user weight of 140kg.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (51-63cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 3:1 that makes retrieval and descent lighter. Total rope length should be divided by 3 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp Jumar which must be operated by a second person, not for self-descent. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod. Transport bag included. Max descent capacity: 250kg, max raising capacity: 150kg.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low alarm: 2ppm, high alarm 4ppm.
Beanie Classic is a every day-use beanie. The beanie is in double layer and rib knitted to achieve god fit and shape. The edge is folded which also can be folded down when used.
To be mounted on the helmet to connect a visor to the helmet.
CST half mask (including a CleanSpace CST head harness) is designed for use with the CleanSpace PRO Power Unit (CST1002) and CleanSpace ULTRA Power Unit (CST 1012).Made of soft silicone that moulds easily to the face and does not cause allergic dermatitis. Easy to attach to the power unit, the head harness easily attaches to the connection points and can be removed for cleaning.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Reducer for mounting on gas cylinder for manual testing or calibration of diffuse Watchgas gas detectors. Not suitable for use with ractive test gases such as chlorine, ozone, ..
Women's light work jacket from the Progression collection, enhanced visibility EN17353.
The Bodycool Xtreme cooling vest is a lightweight design made to be worn snugly around the body. It generates a cooling effect lasting 1 to 4 hours, depending on the ambient temperature, airflow, and humidity.
Wide, adjustable positioning belt with automatic buckles and padding. Suitable for a maximum user weight of 140 kg.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface for excellent grip and precise object handling. Long cuff for optimal protection. Food approved. Thickness: 0.11 mm. Length: 290mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374: TYPE B: JKT – VIRUS – EN 421
Ki-Waistcoat TR310 with integrated lifevest: • Buoyancy 310N • Tricot mesh; • ID pocket; • VHF pocket; • Antenna/mic attachment; • Knife attachment; • Adjustable width; • Crotch strap. Available colours: Fluo yellow. Available sizes: S/M, L/XL and 2XL/3XL.
Full grain leather boot with a perforated protective toecap made of polymer and Flextane antiperforation midsole. Fitted with two pull loops on the boot for easy donning. The Softane two-component sole with lugs provides better protection against slipping and is not affected by contact with oils and hydrocarbons. The shoe provides good shock absorption. Sizes: 35-48.
Ultra-thin, antistatic gloves with polyurethane coating on palm and seamless lining on the back. Excellent tactility.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Replacement filters for flowstream air regulator. AK filter that removes unpleasant odours and taste from compressed air. Suitable f or: processes involving chemical risks.
Chemical jacket made of PVC C2. The zipper is covered by a double flap with Velcro. The jacket also has an extended collar and elast ic cuffs at the wrists. The Aci-Tec jacket can be used in combination with the Aci-Tec trousers. Available in: green. Sizes: M - XXL .
Polycarbonate replacement lens for shot blasting helmet Commander. Is placed in front of mesh visor. Dimensions: 155 x 100 x 2 mm. S uitable for: processes involving chemical risks.
Dust-proof, impact resistant first aid kit made of ABS plastic, Suitablefor: the Belgian market. Dimensions: 320 x 220 x 125 mm, for maximum 20 people. Includes wall mount and content. Additional refills available.
Metal emergency cabinet for storage of keys, includes hammer for breaking the glass. Intended for mounting indoors beside locked exit doors. Dimensions: 150 x 115 x 40 mm.
Fire alarm. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Spill kit for small- to medium-sized calamities. The chemical and water resistant can contains the materials, which makes it ideal f or outdoor storage. The container can be used to transport the used material. Content: 12 pads (41 x 51 cm), 3 socks (7.6 x 366 cm), 2 pillows (43 x 48 cm), 1 pair of safety glasses, 1 pair of gloves, 3 disposal bags and 1 emergency response handbook. Absorption c apacity: 59 litres. The absorption material in the spill kit is of MRO quality.
Rescue sign - Safety shower in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
Small universal lock for pipes.
Low shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Absorbent pads measuring 41 cm x 51 cm. These light-weight perforated absorption pads are packaged in a box. Available per 200 items. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 221 litres.
First Aid box, white painted metal, with lock and key. With 3 shelves of which 2 adjustable. Dimensions: H.46 cm, W.30cm, D.14cm With 2 holes to secure the box against the wall. Application: Industrial buildings, First aid rooms. Not PPE.
Martor spare knife type 37BR, packed per 10 pieces. PPE Category not applicable.
Fire fighting sign - Fire alarm in polypropylene. Dimensions: 148X148mm. Not PPE.
Fire fighting sign - Fire extinguisher in aluminium plate. Dimensions: 200X200mm. Not PPE.
Plastic spill tray with grid. Capacity: 31 litres. Weight: 4.5kg. Dimensions: 805x405x170mm.
The Stability Pro insole gives extra pronation and extra support to the inside of the foot. It provides optimal support to the heel and middle foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is also thermodynamic. Excess heat is removed, preventing blistering.
Dressings cabinets in metal with 2 doors. Dimensions: 75x38x170cm.
A compact, lightweight and portable saturation meter. Measures oxygen saturation and heart rate. Histogram of the heart rate. For both adults and children. Easy to use: 1 button. Compact, light and portable. Turns itself off after 5 seconds if a finger has not been inserted.
Precision cutter in the shape of a pen with disposable ceramic blade. Rubber holder Double-sided ceramic blade is specially designed to stay sharper and cause fewer accidents. Stays sharp for up to 10x longer than normal replacement blades. Replacement blade: 1049816. No PPE.
