BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Hairnet, polypropylene, flap, covers the ears. Available in: White. Diameter: 20-22cm.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs. Suitable for: agricultural and food industry.
Bump cap made of polyethylene with plastic headband and sweatband. Colours: white, yellow, blue, red, green, orange.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Knitted seamlessly with unique Kyorene® graphene fiber that regulates heat and kills harmful bacteria, as well as neutralizing odors.
Care cream for hands and face. Time-tested qualities for heavily- stressed skin. Tube of 100ml.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
Mobile shower with neutralising solution (DIPHOTERINE®), for flushing chemical spatters from the entire body. The atomised water stream ensures perfect distribution. Content: 5 litres. Two year shelf life. Handy packaging which also makes it easy to transport the shower.
Reversible bib & brace trousers / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Elastic braces with buckles on front and back / Legs adjustable by press studs / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6 with PU coating; ± 170 g / m² Colour: W02 white
The Nibas is our cold storage bomber jacket with quilted lining that protects you to temperatures of -40 °C. The inner collar is finished in fleece. The sleeves are handy with knitted cuffs, a practical thumb hole and touch and close sleeve narrowing. For your comfort, the elastic waist can be narrowed using press studs on the sides. The shoulders are reinforced so that this bomber jacket is a durable and practical protective garment. Inside: Fleece inside collar, Provided for hood (hood available separately), Front zip closure under flap, 1 patched chest pocket with flap, 2 inset pockets with flap, 1 sleeve pocket + pen pocket, Round sleeves, Sleeve narrowing by touch and close fastening, Shoulder reinforcement, Elasticated waist and narrowing by press studs at the sides of the waist, Elongated back tail, Back length 80 cm (L) Fabric: 100% polyamide; ± 185 g/m² + hi-vis - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m² Color: fluo yellow / navy. Compliant with: EN 342 + EN ISO 13688 : 2013
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Biodegradable single use glove, powder free.
Low hygiene shoe in Aseptane, with minimal seams. With protective toecap, comfortable Triftane soles and Texon Soft insole for optimal absorption of perspiration moisture. Elastic closure under protective tongue. Lining in pleasant Cambrelle. Washable at up to 30°C.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size. hygiene, transport and distribution sector. No PPE.
The reusable Whisper+ detect earplugs from Uvex, fitted with a cord, provide unrivalled wearing comfort due to the soft ribs and pre formed design. Can be washed daily with normal soap under running water, which makes them economical. Available in package containin g 50 individually boxed pairs. Available in: blue.
Green nitrile glove, 45.5 cm long and 0.56 mm thick. With a sand grain relief for good grip when working with wet objects. Good abrasion and stab resistance. Suitable for the chemical, petroleum and paint industry and for transport and treatment of hazardous substances. Antistatic, food approved. Sizes: 7-11.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Burnshield spray, 125 ml bottle, has cooling effect on burns.
Protective cold storage jacket up to -40 ° C! The inner collar was finished in fleece and the extended back, the narrowed sleeves and the knitted cuffs in the sleeves, which also have a practical thumb hole, help to limit the heat loss. The shoulders are provided with reinforcement to prevent wear and also the elastic narrowing in the back is a comfortable plus of this jacket. Inside: Fixed quilted lining, Knitted cuffs in the sleeves with thumb hole, 1 inner pocket. Exterior: Inner collar in fleece, Fitted with hood (hood available separately), Zipper with flap, 1 patched chest pocket with flap 2 inset pockets with flap, 1 sleeve pocket + pen pocket Rounded-in sleeves, narrowed sleeves by means of Velcro closure Shoulder reinforcement, Elastic narrowing in the back, Extended back and Back length 83 cm (L). Fabric: 100% polyamide; ± 185 g / m² + HV - 100% PES ± 220 g / m² - Hi-vis Cordura: 100% polyester ± 210 g / m². Color: fluo yellow / navy. Compliant with: EN 342.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
These foam rubber earplugs are fitted with a cord and a non-ferrous metal component. This model is 100% detectable and is highly visible thanks to its blue/orange colour. The foam conforms perfectly to the wearer's ear canal. These earplugs are primarily recommended for the food industry. industrial applications.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Burnshield gel, 50 ml bottle, cools burns.
Cut-resistant glove made of special graphene fibers with black HCT® nitrile microfoam coating on the palm. These fibers provide heat regulation and keep hands comfortable. Bacteriostatic kills harmful bacteria. Odor neutralization so that the gloves stay fresh to smell. Without glass and steel fibers. 13 gauge.
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Dispenser for use of 1000 ml and 2000 ml soft bottles.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Coverall, polypropylene / polyethylene with waterproof coating,elasticat wrists and ankles, elastic in the waist, zipper, hood. Available in white. Sizes: L - XXL.
Mini cable locking system - nylon cable The mini-cable locking system with nylon cable is also suitable for locking interrupters. Not PPE.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
Very effective hand cleaner for heavy soiling with oil, grease, soot, graphite, metal dust and lubricants! Contains skin-friendly abrasive granules made from refined walnut shell powder and is solvent-free. Hand cleaner without solvents for heavy soiling. Content: 250 ml tube. PPE category: not applicable.
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Dust mask, class P1, for irritating dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. Various classes of the Gobi series can be distinguished based on the different colours of filter material on the inside of the mask. NPF: 4.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Especially important in the food industry. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
Versatile metal detectable disposable knife. Suitable for cutting single-layer cardboard, foil, and strapping tape, but also for opening adhesive tape and scraping excess substances from smooth surfaces. Can be ordered per 10 pieces.
These unisex thermal trousers have long legs and are suitable for both men and women.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
Lining that fits between cradle and helmet shell for full integration. CE approved to fit all Centurion helmets. No PPE.
