Shopping basket

There are no products in your shopping cart.

Back to overview

100 products found

Filter products

Remove selection

Results for

  • (98)

Price range

to

Status

  • (2)

Heat-resistant

98 products found
Filtered on: All catalogues
Glove Alphatec 39-122 (ex Solknit)

Glove Alphatec 39-122 (ex Solknit)

Brand: ANSELL
Prod. No. 1007577

Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.

8.05 €
Cuff 11-202

Cuff 11-202

Brand: ANSELL
Prod. No. 1034615

Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X

19.57 €
Glove Krytech 395 (ex Kronitproof)

Glove Krytech 395 (ex Kronitproof)

Brand: MAPA
Prod. No. 1007251

Glove made of cut resistant fibres on the entire glove, middle layer of
chemical resistant nitrile on cotton liner. Sizes: 8,9,10.

40.70 €
Glove Wg-748 Dexcut

Glove Wg-748 Dexcut

Brand: WONDERGRIP
Prod. No. 1055280

Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.

16.07 €
Glove Welding Goldspark

Glove Welding Goldspark

Brand: SAMURAI
Prod. No. 1058237

Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding.

Available color: black/gold
Available sizes: 10, 11

16.38 €
Glove Arc Flash Apg Xt Medium

Glove Arc Flash Apg Xt Medium

Brand: STAGO
Prod. No. 1058498

ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test

240.30 €
Glove Activarmr 80-600 (powerflex)

Glove Activarmr 80-600 (powerflex)

Brand: ANSELL
Prod. No. 1007262

PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.

16.70 €
Cuff Kevlar 70-118(KS 18)

Cuff Kevlar 70-118(KS 18)

Brand: ANSELL
Prod. No. 1007331

Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.

8.98 €
Sleeve Guide 371

Sleeve Guide 371

Brand: GUIDE
Prod. No. 1066512

High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit.
The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm.
The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C).
Suitable as a versatile sleeve for TIG, MIG and MAG welding.
Suitable for both right and left arm.
Sizes: M to XL
Complies with: EN388: 2222X – EN407: 423234

35.25 €
Welding Glove Guide 3574

Welding Glove Guide 3574

Brand: GUIDE
Prod. No. 1066446

Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG.
Length: 35–39 cm
Sizes: 7–12
Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E

56.19 €
Glove Fluotech 344 (ex Fluotex)

Glove Fluotech 344 (ex Fluotex)

Brand: MAPA
Prod. No. 1007626

163.10 €
Glove Thermic

Glove Thermic

Brand: ROSTAING
Prod. No. 1066849

Thermal silicone glove for food contact, resistant to temperatures up to 350°C. Fully waterproof and resistant to hot liquids and steam, featuring a comfortable cotton fleece lining and a long cuff for forearm protection. Total length: 45 cm. Suitable for bakeries, commercial kitchens, food processing industries and industrial applications.
Sizes: 7 - 11
Compliant with: EN 407:433XXX – EN 388:3241X EN511:121

45.43 €
Welding Glove Tegera 484

Welding Glove Tegera 484

Brand: TEGERA
Prod. No. 1041310

Heat-resistant glove, Cotton, Nitrile-dots, Dots. Withstands contact heat up to 250°C, Extra long, for allround work. EN 388:2003 1.2.3.2 EN407 0.2.X.X.X.X

7.99 €
Glove ESD Tegera 879

Glove ESD Tegera 879

Brand: TEGERA
Prod. No. 1056557

A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω

5.62 €
Glove Flint SPP2NITBKV+

Glove Flint SPP2NITBKV+

Brand: ROSTAING
Prod. No. 1026158

from 38.47 €
Glove Alphatec 39-124 (ex Solknit)

Glove Alphatec 39-124 (ex Solknit)

Brand: ANSELL
Prod. No. 1007578

Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.

8.37 €
Glove Guide Sparx 7505

Glove Guide Sparx 7505

Brand: GUIDE
Prod. No. 1050332

Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.

151.80 €
Glove Crusader Flex 42-445

Glove Crusader Flex 42-445

Brand: ANSELL
Prod. No. 1007391

Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone free.

16.55 €
Glove Edge 16-500 (ex Gladiator)

Glove Edge 16-500 (ex Gladiator)

Brand: ANSELL
Prod. No. 1007217

Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.

5.93 €
Glove Harpon 321

Glove Harpon 321

Brand: MAPA
Prod. No. 1007531

This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.

6.44 €
Glove Welding Argon

Glove Welding Argon

Brand: GSA
Prod. No. 1007095

Welding gloves made of grey, very high-quality nappa leatherwithprotective cuff. The 15 cm protective cuff is made of cowsplitleatherand the fingers have reinforced seams, but these gloves
nonetheless have remarkably good tactility.
industrial welding (TIG). Sizes: 9 and 11

3.90 €
Glove Grip-Flex Nitril Foam

Glove Grip-Flex Nitril Foam

Brand: SAMURAI
Prod. No. 1018552

Glove with extremely smooth and efficient carrier nitrile foam coating. Glove gives very pleasant feeling and thus provides increased comfort. Excellent grip in wet or oily conditions thanks to the foam nitrile coating. Conform: EN388: 4.1.3.1.X, EN 407 X.1.X.X.X.

2.94 €
Welding Glove Tegera 126A

Welding Glove Tegera 126A

Brand: TEGERA
Prod. No. 1036479

Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X

14.70 €
Glove Grip-Flex Nitriblade Foam Long

Glove Grip-Flex Nitriblade Foam Long

Brand: SAMURAI
Prod. No. 1021428

knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.

9.67 €
Glove Jersette 300

Glove Jersette 300

Brand: MAPA
Prod. No. 1007521

Natural latex glove, smooth exterior, lined interior Motion freedom: excellent comfort thanks to lining (no irritating seams). Very high abrasion resistance and good resistance to various acids and ketones. Applications: treatment of frozen foods, vegetable growing, chicken breeding, perfume production, polyester lining, masonry work, inks and dyes production. Length: 31 to 33 cm (depending on size) Thickness: 1.15 mm. Sizes: 5-10.

4.78 €
Glove Grip-Flex Nitriblade Foam

Glove Grip-Flex Nitriblade Foam

Brand: SAMURAI
Prod. No. 1021427

knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.

8.69 €