Shopping basket

There are no products in your shopping basket.

Back to overview

300 products found

Filter products

Remove selection

Results for

  • (242)

Price range

to

Status

  • (6)

Heat-resistant work gloves

300 products found
Filtered on: All catalogues
GLOVE GRIP-FLEX NITRIL FOAM

Glove grip-flex nitril foam

Brand: SAMURAI
Prod. No. 1018552

Glove with extremely smooth and efficient carrier nitrile foam coating. Glove gives very pleasant feeling and thus provides increased comfort. Excellent grip in wet or oily conditions thanks to the foam nitrile coating. Conform: EN388: 4.1.3.1.X, EN 407 X.1.X.X.X.

 
GLOVE GRIP-FLEX NITRIBLADE FOAM

Glove grip-flex nitriblade foam

Brand: SAMURAI
Prod. No. 1021427

knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.

 
GLOVE GRIP-FLEX DYNABLADE NITRIL LIGHT
Durable

Glove grip-flex dynablade nitril light

Brand: SAMURAI
Prod. No. 1035319

The lightest and most comfortable cut resistant glove (18 gauge) thanks to the use of Dyneema Diamond Technology. A perfect synergy of high sensitivity, cut resistance and comfort. This glove has an excellent performing thin nitrile foam coating (without silicones) with an exceptionnal grip on oiled or slippery surfaces and gives contact heat protection upto 100°C. Thanks to its light weight and the Dyneema® Diamond fibre, your hands stay well ventilated and get a "cool" grip. No use of glass fibre or any other external cut resistant fibres so the cut resistant properties remain intact. Ideal for use in applications such as assembly of thin parts or montage. Available sizes: 7-11.

 
GLOVE TEGERA 8805 INFINITY

Glove tegera 8805 infinity

Brand: TEGERA
Prod. No. 1039683

Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (18 gauge) with insulating layer nitrile foam/aqua PU in the palm, with extra coating between thumb and forefinger.Heat resistant up to 100°C contact heat. Sizes: 6-11.

 
GLOVE GRIP-FLEX NITRIL FOAM PREMIUM

Glove grip-flex nitril foam premium

Brand: SAMURAI
Prod. No. 1041597

Glove with extremely flexible and thin liner in stretch material with high-performance nitrile foam coating. Glove gives a very soft, cool and pleasant feeling and ensures breathability (sweat is quickly drained) for excellent wearing comfort. All materials of the glove are Oeko-Tex certified. 15 gauge Glycose / Glycerol sustainable liner Production of this liner reduces the CO2 emission with 67% compared to standard nylon. Solid grip in dry and oily circumstances. Touch-screen functionality. Protection against a short contact heat of 100 ° C. Available sizes: 7-11. Conforms to: EN 388: 2016: 4.1.2.1.X and EN 407 X.1.X.X.X.X.

 
GLOVE ALPHATEC 58-535W

Glove alphatec 58-535w

Brand: ANSELL
Prod. No. 1007600

Lined, nitrile gauntlet gloves with new Grip Technology. Inner and outerlayer of nitrile rubber. Extremely good physical characteristics andgood grip, even in wet and oily conditions. Finished at top withstraight-cut opening, with seamless knit nylon liner. Food approved. Antistatic, without silicones. Good chemical resistance to greases, oils and hydrocarbons.

 
GLOVE THERMO WG-380

Glove thermo wg-380

Brand: WONDERGRIP
Prod. No. 1043059

"Wonder Grip® Thermo" is an evolution of "Wonder Grip® Thermo Lite", with a doubled latex coating and a 10-gauge acrylic pile loop liner. The napped acrylic liner makes the hands feel warmer in cold conditions. Furthermore, "Wonder Grip® Thermo" can be used in a below-freezing environment. Sizes: 7(S) -11(XXL).

 
GLOVE WELDING ARGON

Glove welding argon

Brand: GSA
Prod. No. 1007095

Welding gloves made of grey, very high-quality nappa leatherwithprotective cuff. The 15 cm protective cuff is made of cowsplitleatherand the fingers have reinforced seams, but these gloves
nonetheless have remarkably good tactility.
industrial welding (TIG). Sizes: 9 and 11

 
GLOVE ALPHATEC 58-735

Glove alphatec 58-735

Brand: ANSELL
Prod. No. 1039552

Nitrile gauntlet gloves, lined with Intercept™Cut Resistance Technology that provides ISO C cut protection. Nitrile barrier provides advanced chemical protection from many frequently used chemicals. With new Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort. Finished at top withstraight-cut opening. Antistatic and suitable to use in foor environments .

 
GLOVE CANADA

Glove canada

Brand: ROSTAING
Prod. No. 1038994

Seemless knitted glove in warm and comfortable acryl .Nitrile coating with PVC dots on the palm for a good grip. Touch screen compatible. Food approved. Protects against cold (0°-10°C) as well as heat (100°C for 40sec. and 250°C for 14sec). Sizes: 6,7 and 8 (turqoise) and 9,10 and 11 (ocean blue). Lenght: 26cm.

 
GLOVE GRIP-FLEX NITRIL FOAM KC

Glove grip-flex nitril foam kc

Brand: SAMURAI
Prod. No. 1032265

Glove with double nitrile coating on a very thin and supple lining in
nylon/spandex. The double coating protects the palm and ¾ back from
penetration of oils (red nitrile coating) without loss of grip (black
nitrile foam). Highest protection in combination with excellent comfort!

EN407:2020: X1XXXX

 
GLOVE THERMO PLUS WG-338

Glove thermo plus wg-338

Brand: WONDERGRIP
Prod. No. 1043062

"Wonder Grip® Thermo Plus" is fully doublecoated with latex on the back of the hand andincludes a 13-gauge napped acrylic liner."Wonder Grip® Thermo Plus" includes both"Wonder Grip® Aqua" and "Wonder Grip®Thermo"s advantages; therefore, it can be usedin situations requiring dexterity in wet and coldconditions.Furthermore, "Wonder Grip® Thermo Plus"maintains dexterity and comfort while keepingthe hands warm. Sizes: 7(S) -11(XXL).

 
GLOVE DEXLITE WINTER

Glove dexlite winter

Brand: GSA
Prod. No. 1044815

Winter glove with a gray nitrile coating and warm acrylic lining. This glove is fully coated wiith a high dexterity and outstanding wearing comfort. Unique glove that can be used widely since it combines different levels of protection. It offers basic protection against cutting risks (level B), but can also be used for short contact with hot objects up to 100 ° C (EN407) and for work in cold environments (EN511). Use for general applications in colder environments. Available sizes: 7/8/9/10/11. In accordance with EN388 2016: 4.2.3.2.B, EN407: X1XXXX and EN511: 020

 
GLOVE GUIDE 313

Glove guide 313

Brand: GUIDE
Prod. No. 1043003

Soft cut resistant glove that combines confort and durability and offers a good protection agains sharp objects. The nitrile foam coating is DMF-free and breathable, so the hands of the user stay cool all day long. Touch sreen compatible.Sizes 7 - 12.

 
GLOVE GUIDE 585

Glove guide 585

Brand: GUIDE
Prod. No. 1029361

 
GLOVE GRIP-FLEX DYNABLADE FOAM BLACK
Durable

Glove grip-flex dynablade foam black

Brand: SAMURAI
Prod. No. 1035471

A real innovation within hand protection thanks to the use of new Black Dyneema® Diamond Technology. This new technology grants the Dynablade Foam Black a hight cut resistance level 5 without use of any other cut resistant fibre such as glass fibre or steel. All of this results in a unique and comfortable glove (13 gauge). It has a high performance foam nitrile coating (without silicones) with exceptionnal grip on oiled or slippery surfaces. Thanks to the Dyneema Diamond fibre your hands are well ventilated and the glove receives a "cool" grip. The black colour of the glove makes it a perfect solution to be used in grimy environments. Perfect for use in applications where a high cut resistance is needed, such as assembly of thin parts. Available sizes: 7-11. In line with EN 388 4.X.4.2, ISO 13997 Class D.

 
HS GRIP-FLEX NITRIBLADE FOAM KC

Hs grip-flex nitriblade foam kc

Brand: SAMURAI
Prod. No. 1022831

Knitted cut resistant glove (8cm cuff) with double nitrile coating. A gray smooth base nitrile coating on palm and three quarters back that prevents fluids can penetrate. Moreover, a black foam nitrile coating for excellent grip in dry and wet conditions. The carrier consists of highly cut resistant fibers, nylon and spandex. . Very comfortable and excellent protection against abrasion and cut risks, in many applications where oil is being used. Application: glass industry, metal assembly, plastic injection, etc. ..

 
GLOVE GRIP-FLEX NITRIBLADE FOAM LONG

Glove grip-flex nitriblade foam long

Brand: SAMURAI
Prod. No. 1021428

knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.

 
SLEEVE GUIDE 370

Sleeve guide 370

Brand: GUIDE
Prod. No. 1054904

Cut protection and contact heat protection up to 100°C (15 sec) with unique design at the hand so that the sleeve stays in place and does not curl up.

 
GLOVE ALPHATEC 58-530W

Glove alphatec 58-530w

Brand: ANSELL
Prod. No. 1007599

Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.

 
GLOVE ALPHATEC 87-029 (EX ASTROFLEX)

Glove alphatec 87-029 (ex astroflex)

Brand: ANSELL
Prod. No. 1014780

Supported blue natural rubber glove. Seamless made for comfortable wearing. Wrinkled finish on the hand for perfect grip in wet and dry conditions. Very smooth and very good dexterity. Ideal for use in the fishing industry, oyster fishing, cleaning, chemical cleaning, wet and dry use and general use with food.

 
OVERGLOVE ELECTRO CLASS 0 AND 00

Overglove electro class 0 and 00

Brand: REGELTEX
Prod. No. 1028356

Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.

 
GLOVE GUIDE 662W

Glove guide 662w

Brand: GUIDE
Prod. No. 1042469

Durable gloves for all extended tasks in cold conditions. 3/4 nitrile coating on seemless polyester lining. Completlely lined with acryl. Sizes: 7 / 8 / 9 / 10 / 11.

 
GLOVE GUIDE 5122W

Glove guide 5122w

Brand: GUIDE
Prod. No. 1052926

Fully lined, waterproof winter glove with touchscreen function, made of durable synthetic leather. The preformed fit and the back with stretch material make the glove movable and flexible. Hi-vis yellow on the back for good visibility. Reinforced thumb grip and fingertips, elasticated wrist. Good girp on both dry and wet surfaces. Sizes: 7-12. Complies with: EN388:2016 2.1.2.1.X, EN511: 1.2.1. EN407: X.1.X.X.X.X

 
GLOVE WELDING ULTRAWELD II

Glove welding ultraweld ii

Brand: GSA
Prod. No. 1016755

Durable quality leather welding gloves in red cow split leather with
full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12.
Length: 35 cm.
welding.

 
IMPACT GLOVE RINGERS R065

Impact glove ringers r065

Brand: ANSELL
Prod. No. 1048065

Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P

 
GLOVE GUIDE 578 ESD

Glove guide 578 esd

Brand: GUIDE
Prod. No. 1046665

Light and thin glove made of seemless knitted nylon/carbon fibre with micropourous nitrile coating. Especially for touch-screen and ESD applications. Sizes: 6-11.

 
GLOVE WELDING SUPERWELD

Glove welding superweld

Brand: PROCOVES
Prod. No. 1007090

Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.

 
GLOVE 50-6111

Glove 50-6111

Brand: TILSATEC
Prod. No. 1039861

The ever popular medium weight cut level E 50 range is evolving into upgraded equivalent styles with higher specification providing incredible level F cut protection to EN388:2016. EN388: 2016 maximum level F cut resistance; Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 2 F; High level of abrasion resistance; Dry PU palm coating provides secure grip; Dark colour liner hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.

 
GLOVE TEMP-DEX 720

Glove temp-dex 720

Brand: MAPA
Prod. No. 1022961

Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.

 
GLOVE IMPACT A722

Glove impact a722

Brand: PORTWEST
Prod. No. 1032359

Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)

 
GLOVE DEXLITE EDGE NITRIL LIGHT

Glove dexlite edge nitril light

Brand: GSA
Prod. No. 1043080

Cut resistant knitted glove with a foam nitrile coating. The liner or support is made of HPPE, nylon and glass fibre. The foam nitril coating guarantees a fine grip on oiled surfaces. Extra reinforcement between index and thumb. This thin glove combines a medium cut-resistance level (class B) with high comfort (lightweight and dexterity). Applications: General industrial work like machine maintenance or treating sharp oiled objects. Available sizes: 7-11.

 
GLOVE DEXLITE CUT NITRIL

Glove dexlite cut nitril

Brand: GSA
Prod. No. 1017932

Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.

 
GLOVE GUIDE XLNT CUT 9507

Glove guide xlnt cut 9507

Brand: GUIDE
Prod. No. 1052301

Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X

 
GLOVE TEGERA 32

Glove tegera 32

Brand: TEGERA
Prod. No. 1048691

Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.

 
GLOVE GUIDE HXFIBR 6609

Glove guide hxfibr 6609

Brand: GUIDE
Prod. No. 1054543

Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.

 
GLOVE HYFLEX 11-840

Glove hyflex 11-840

Brand: ANSELL
Prod. No. 1025319

Very wear-resistant FORTIX ™ nitrile foam coating on a 15-stitch per inch, nylon spandex lining, with coated palm. Tricot cuff. Length 200-275 mm. Grey and black. Silicones free. Sizes: 6-11.

 
GLOVE GUIDE HXFIBR 6604

Glove guide hxfibr 6604

Brand: GUIDE
Prod. No. 1047724

Cut resistant glove on seamles knit liner in HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.

 
GLOVE ARGON COMFORT WELDER

Glove argon comfort welder

Brand: GSA
Prod. No. 1041533

Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.

 
GLOVE NITRIBLADE LONG PREMIUM

Glove nitriblade long premium

Brand: GSA
Prod. No. 1047107

Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.

 
GLOVE HYFLEX 11-541

Glove hyflex 11-541

Brand: ANSELL
Prod. No. 1035118

 
GLOVE DEXLITE LATEX GREEN
Durable

Glove dexlite latex green

Brand: GSA
Prod. No. 1049961

Sustainable glove with a natural latex coating. The liner consists of 44% recycled material, namely 25% recycled polyester and 19% recycled cotton. The roughened latex coating provides a firm grip and good abrasion resistance. Versatile because the liner also offers a limited degree of cut resistance. (class B) and offers good short protection against thermal risks (up to 250 ° C). Possible applications: general maintenance, construction and logistics, green service. Conforms: EN388: 2016: 3.1.4.2.B, EN407: X2XXXX. Available sizes: 8-11.

 
GLOVE GUIDE OT 4501

Glove guide ot 4501

Brand: GUIDE
Prod. No. 1047675

Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Touchscreen function on the forefinger. Sizes: 7-12. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X

 
GLOVE GUIDE 580

Glove guide 580

Brand: GUIDE
Prod. No. 1027879

Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X

 
GLOVE WELDING PROFUSION-1

Glove welding profusion-1

Brand: ROSTAING
Prod. No. 1041001

Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.

 
GLOVE BAMBOO TWINFLEX D XG PLANET
Durable

Glove bamboo twinflex d xg planet

Brand: UVEX
Prod. No. 1056023

Glove made from renewable raw materials: natural bamboo fibres, with flexible coating that ensures high sensitivity, comfort and effective grip. This glove adapts exactly to each individual shape of the hand after 3 to 5 minutes. Exceeds REACH regulations. CO² neutral production in Germany, short supply chain.

 
CUFF KEVLAR 70-118(KS 18)

Cuff kevlar 70-118(ks 18)

Brand: ANSELL
Prod. No. 1007331

Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.

 
GLOVE GRIP-FLEX PRO BLADE F

Glove grip-flex pro blade f

Brand: SAMURAI
Prod. No. 1053598

High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C

 
GLOVE GUIDE ENVI 3304

Glove guide envi 3304

Brand: GUIDE
Prod. No. 1052027

Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.

 
GLOVE ULTRANEO 382 (EX STANZOIL NK-22)

Glove ultraneo 382 (ex stanzoil nk-22)

Brand: MAPA
Prod. No. 1007627

Supple and chemically resistant gloves made of neoprene on a cotton liner. The exclusive outer finish provides an excellent grip. Sizes: 7 / 8 / 9 / 10 , length 35.5 cm.

 
WELDING GLOVE TEGERA 126A

Welding glove tegera 126a

Brand: TEGERA
Prod. No. 1036479

Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X

 
GLOVE MASTERTOP

Glove mastertop

Brand: ROSTAING
Prod. No. 1007281

Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.

 
GLOVE GUIDE HXFIBR 6602

Glove guide hxfibr 6602

Brand: GUIDE
Prod. No. 1047723

Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.

 
CUFF KEVLAR 70-114(KS14)

Cuff kevlar 70-114(ks14)

Brand: ANSELL
Prod. No. 1007332

Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.

 
WELDING GLOVE GUIDE 1230

Welding glove guide 1230

Brand: GUIDE
Prod. No. 1055201

Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.

 
GLOVE ALPHATEC 39-124 (EX SOLKNIT)

Glove alphatec 39-124 (ex solknit)

Brand: ANSELL
Prod. No. 1007578

Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.

 
GLOVE TEGERA 8807 INFINITY

Glove tegera 8807 infinity

Brand: TEGERA
Prod. No. 1038308

Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.

 
GLOVE GUIDE HXFIBR 6605

Glove guide hxfibr 6605

Brand: GUIDE
Prod. No. 1052732

Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X

 
GLOVE ACTIVARMR 80-658 (EX POWERFLEX)

Glove activarmr 80-658 (ex powerflex)

Brand: ANSELL
Prod. No. 1014655

The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.

 
GLOVE ACTIVARMR 78-101

Glove activarmr 78-101

Brand: ANSELL
Prod. No. 1007809

Stretchy glove, seamlessly knitted with blue Dacron fibres.

 
GLOVE GUIDE 329

Glove guide 329

Brand: GUIDE
Prod. No. 1044491

Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.

 
GLOVE HYFLEX 11-842 GREEN
Durable

Glove hyflex 11-842 green

Brand: ANSELL
Prod. No. 1054494

Durable glove made from 90% recycled nylon fiber (15 gauge) with a nitrile foam coating on the palm. Touch screen compatible. The ZONZ™ patented knitting technique provides improved and comfortable hand movement. Less packaging material by omitting plastic in the inner packaging. The FORTIX™ technology ensures that the glove is 20% more abrasion resistant, and can therefore be used longer in applications where a lot of abrasion resistance is required. Latex, silicone and DMF free. Suitable for use in the food industry. Sizes: 5-12. Complies with: EN388:2016: 4.1.3.1.A, EN407: X.1.X.X.X.X.

 
GLOVE GUIDE 330

Glove guide 330

Brand: GUIDE
Prod. No. 1052886

Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X

 
GLOVE ALPHATEC 53-001

Glove alphatec 53-001

Brand: ANSELL
Prod. No. 1050906

Chemical resistant glove with multiple barriers. Innovative multi-layer polymer design with nitrile-neoprene-nitrile layers. Provides protection against a variety of chemicals from acids to bases to hydrocarbons and organic solvents. Featuring the latest Michrochem chemical barrier technology for superior protection in hazardous conditions. Inside of soft nylon lining for comfort and extra mechanical protection. Oeko-Tex standard 100- approved. Permeation time> 30 minutes for 13 of the 18 chemicals listed in EN ISO 374: 2016. Antistatic, latex and silicone free. Length: 35 cm, thickness 0.38 mm. Sizes: 6-11. Conforms: EN388: 2016 3.1.2.1.A, EN407: X.1.X.X.X.X, EN ISO 374-1: 2016 Type A: ACFGJKLMNOPST, EN ISO 374-5:2016

 
GLOVE GUIDE 590W

Glove guide 590w

Brand: GUIDE
Prod. No. 1042240

Orange Hiviz winterlined glove with seamless acrylic liner, water thight and fully latex dipped. Sizes: 8-11.

 
GLOVE ALPHATEC 39-122 (EX SOLKNIT)

Glove alphatec 39-122 (ex solknit)

Brand: ANSELL
Prod. No. 1007577

Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.

 
GLOVE ACTIVARMR 80-813

Glove activarmr 80-813

Brand: ANSELL
Prod. No. 1022542

The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.

 
GLOVE GUIDE OT 4507

Glove guide ot 4507

Brand: GUIDE
Prod. No. 1047679

Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Fully coated PVC/NBR, water, and oil resistant, with chemical protection. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Sizes: 7-12. Conform: EN388:2016 4.X.3.1.C.P, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMPT, EN374-5:2016:VIRUS

 
GLOVE HYFLEX 11-571

Glove hyflex 11-571

Brand: ANSELL
Prod. No. 1056371

Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED.
Sizes: 5-12
Complies with: EN388: 4X43D, EN407: X1XXXX

 
GLOVE ULTRANITRIL 381

Glove ultranitril 381

Brand: MAPA
Prod. No. 1007597

Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.

 
GLOVE GUIDE 762W

Glove guide 762w

Brand: GUIDE
Prod. No. 1025532

Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.

 
GLOVE DEXLITE EDGE NITRIL TS

Glove dexlite edge nitril ts

Brand: GSA
Prod. No. 1054942

Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.