BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
Supple latex gloves with rolled cuff to prevent leakage in wet conditions.
Polyvinyl alcohol coated gloves with knitted cotton lining. Idea for processing aggressive chemicals and strong organic solvents. Virtually no reaction with aromatic and chlorine-containing solvents. Due to coating, the gloves are not suitable for working with water-based solvents!
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Green nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. Palm thickness: 28 mil/0.7mm According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 - EN421
Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 7-11.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Static dissipative glove: exceptional protection against electrostatic discharge. Proprietary nitrile formulation: ensures low vertical resistance below 10⁸ Ω. TNT™ Chemical Splash Resistance Technology: enhanced chemical protection. Touchscreen compatible. Food approved. Length: 24 cm Thickness: 0.16 mm Sizes: S – XXL Compliant with: EN 16350, EN 374: JKPT – VIRUS
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
Glove with nitrile coating (cotton/polyester). Length: 30cm. Glove with high finger sensitivity.
Unlined ultra-chemical-resistant glove offering comfort and dexterity.
Optimized fit that integrates the nylon liner (18 gauge) into the nitrile and neoprene shell for better dexterity & tactility versus double gloving. Excellent dry & wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm. Food approved.
Chlorinated and powder‑free disposable nitrile glove with excellent fingertip sensitivity and a fingertip grip pattern. Easy donning and doffing. Food approved and touchscreen compatible. Thickness: 0.11 mm / 2.36 Length: 240 mm Compliant with: EN 374‑1: Type B JKT, EN 374‑5: VIRUS
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Liquid-proof gloves made of jersey coated with high-quality neoprene. High mechanical resistance and resistant to a wide range of ch emical products.
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Acrylic lining without seams, PVC coating, thickness 1.1 mm, length 30 cm. The lining protects against cold (up to -20°C), is comfortable and efficient. The PVC is highly resistant to most chemical products. Good tear resistance. Washable at 40°C with a neutral detergent. Sizes: M(8)-XL(10).
Chemical protection glove, PVC (Vinyl), Cotton, Seamless, Sandy finish, Cat. III, Blue, Extra long 70cm, for heavy work. Sizes: 7-11.
The 100% nitrile glove provides protection against a wide range of oils, solvents and chemicals. The diamond grip surface finish increases grip wet road surface for more convenience and safety. Length 33cm, thickness 0.15mil Sizes: 7(S)-11(XXL)Conform: EN388:2016 4.1.0.1.X, EN ISO 374-1:2016 Type A: AJKLOPT, EN ISO 374-5:2016 VIRUS
Flexible and comfortable butyl rubber glove with rough finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals. Gastight and latex free. Lenght: 35cm, Thickness: 0.7 mm. Sizes: 7-11.
Green, latex-free disposable glove in Neoprene, suitable for use with touch screens.
High-quality ambidextrous nitrile disposable gloves, specifically designed for use in laboratories and non-sterile pharmaceutical en vironments. The optimized nitrile formula (acrylonitrile butadiene) offers comprehensive protection against chemicals and chemotherapy drug spla shes without compromising comfort. Latex and silicone-free. Food-approved. Length: 240 mm Sizes: XS to XL Compliant: EN374: Type B: JKOPT, VIRUS
Chemical resistant PVC glove with impact and cut protection. TPR impact protection on top of the hand and full length of fingers. PVC coating for waterproof and chemical resistance. Inside liner provides all round 360 degree cut resistance. Durable textured palm coating for enhanced grip. Sizes: 8,10 and 12.
Green powder-free nitrile glove with EBT Technololy: biodegradation occurs in biologically active landfills within 1-5 years. Decreased risk of allergies, latex free, food approved. Sizes: XS(5-6) to XXL (10-11). Length: 24 cm. Thickness: 0,10mm. Package: per 100 gloves! Food approved.
Constructed with a rough-finish triple-dipped PVC coating, this chemical protection glove prioritizes wearer safety and comfort. A seamless, soft cotton liner wicks away moisture to prevents odours, and the ergonomic design reduces hand fatigue. The rough grip offers high-performance precision in greasy or damp environments. Sizes: 9(L)-11(XXL). In line with EN388:2016 4.1.2.1.X, EN ISO 374-1:2016 Type B: JKL
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 20 mil/0.50mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 en EN421
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
Green, latex‑free disposable neoprene glove, suitable for touchscreen use. Extended cuff. With fingertip pattern. Food approved. Thickness: 0.12 mm Length: 290 mm Sizes: 7–10 Compliant with: EN 374‑1: TYPE B KPT, EN 374‑5 VIRUS, EN 421
Disposable black nitrile glove with protection against chemical splashes Type A (JKOPST). Ideal for environments where silicone must be avoided, such as painting or finishing work. Improved grip and control thanks to textured palm. Approved for food contact, silicone-free, powder-free, and suitable for touchscreens. Tested for substances that may interfere with paint adhesion. Length: 295 mm Thickness: 0.20 mm AQL: 0.65 Sizes: 7-11 Compliant with: EN388: 1000X EN374: Type A (JKOPST) EN374-5: VIRUS
Versatile nitrile chemical glove. Diamond pattern provides excellent grip. Latex and silicone free. Food approved. Flock lined. Thickness: 0.38 mm. Sizes 7-11. Compliant with: EN 374: TYPE A AJKLMNOPT VIRUS, EN 388: 4101X.
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Blue powder free 100% nitrile glove. Suitable for use with food. Sizes: S(7) to XL (10). Length: 24 cm. Thickness: 0,12 mm. Package: per 100 gloves. PPE Cat I
Natural latex glove, smooth exterior, lined interior Motion freedom: excellent comfort thanks to lining (no irritating seams). Very high abrasion resistance and good resistance to various acids and ketones. Applications: treatment of frozen foods, vegetable growing, chicken breeding, perfume production, polyester lining, masonry work, inks and dyes production. Length: 31 to 33 cm (depending on size) Thickness: 1.15 mm. Sizes: 5-10.
