BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
The thinnest glove with cut protection level F, with the new advanced CRF® omni technology with a reinforced HPPE cut protection fibre. 21 gauge, with PU coating. Reinforcement between thumb and index finger and touchscreen functionality. Conforms to: EN ISO 21420:2020 - EN 388:2016+A1:2018 2.X.4.2.F
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
Cut resistant sleeve with CRF® technology, polyester, spandex and stainless steel fibre yarn. Approved for handling food. Elastic, length 420-490mm with thumb loop. Conforms to: EN388:2016: 3.X.4.X.D
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 500°C for 15 sec.
Highly dexterous glove with high cut resistance. Nitrile foam coating with Aerofit technology (up to 30% thinner). Breathable 21 gauge liner. Food approved. Touchscreen compatible. Sizes: 5–12 Compliant with: EN 388: 3X32F
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
18 gauge knitted glove made of HPPE, polyamide and Spandex fibres. Nano foam nitrile coating on palm and 3/4 back. Protection against impact on back and fingers. Touchscreen. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.4.2.D.P
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.3.C, EN407:2020: X.1.X.X.X.X
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Glove with high cut protection (51N) and latex coating for excellent grip. Leaves no marks on surfaces. Sizes: 7-11 Compliant with EN 388 3X43F, EN407:X2XXXX
Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Glove with excellent grip in oily environments, preventing slippage and injuries. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG. Length: 35–39 cm Sizes: 7–12 Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrilfoam coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: HPPE. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Cut-resistant glove made from graphene-based fibre. PU coating. 13 gauge. Touchscreen function. Sizes: 6-11. Conforms to: EN388:4X42B.
Cut-resistant glove made from graphene-based fibre. PU coating. 18 gauge. Touchscreen function with reinforced thumb crotch. Sizes: 6-12. Conforms to: EN388:4X42D.
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
HPPE glove, 13 gauge. Sandblasted foam nitrile coating on the palm and fingertips; elasticated wrist. Maximum abrasion and tear resistance. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Extreme finesse. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.3.1.C
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.4.2.D
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Glove with excellent grip in oily environments, preventing slippage and injuries. Fully and triple coated with nitrile foam in the palm and a latex-free cuff. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Ultralight design: 20% lighter. 13 gauge. Enhanced Fortix® technology: 20% more abrasion resistance. 12 times higher cut resistance (vs. standard HPPE) using Next Generation single strand HPPE yarn developed with INTERCEPT(TM) cut resistance technology. Nitrile coating. Oeko-Tex certification. Food approved. Sizes: 6-12. Conforms to: EN388:2016: 4.X.4.3.F. EN407: X.1.X.X.X.X
Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement. Sizes: 6-12 Complies with: EN388:2016 4X43FP
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
