BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Green, latex-free disposable glove in Neoprene, suitable for use with touch screens.
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
The 100% nitrile glove provides protection against a wide range of oils, solvents and chemicals. The diamond grip surface finish increases grip wet road surface for more convenience and safety. Length 33cm, thickness 0.15mil Sizes: 7(S)-11(XXL)Conform: EN388:2016 4.1.0.1.X, EN ISO 374-1:2016 Type A: AJKLOPT, EN ISO 374-5:2016 VIRUS
High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit. The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm. The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C). Suitable as a versatile sleeve for TIG, MIG and MAG welding. Suitable for both right and left arm. Sizes: M to XL Complies with: EN388: 2222X – EN407: 423234
HPPE glove, gauge 18. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. Ideal for precision work. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.2.1.B
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm and three-quarters of the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
This glove offers excellent grip in dry, damp and slightly oily environments. The single nitrile foam coating in the palm makes the glove comfortable, yet grippy. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 3.1.1.X - EN 407:2020: X.1.X.X.X.X
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Five-finger glove in Kermel terry cloth with wool fleece lining, short-term contact with 500°C, long cuff in split leather, Kevlar s titched, length 40 cm.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
Very flexible lightweight glove in Dyneema. Hyflex offers excellent cutting resistance. The white outer coating in polyurethane protects the dyneema fibre (and thus the hand) during abrasive activities. This glove with great sensitivity will last and last. Recommended for manipulating materials and tools with sharp edges, e.g. in the automotive industry or in the production of durable goods. Sizes: 6-10.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
Cut and impact resistant apron in water and oil repellent split leather. Kevlar seams. Lining in Tekinox for maximum cutting resistance. Leg connections in Velcro and top attaches to belt strap. Universal size. EN388: 4.5.4.4 ISO13997: 34.8N
A general purpose safety glove made of 13gge HPPE fibers with black PU coating on the palm. Guarantees all-day comfort. Suitable for fine work with limited cutting risk. Sizes: 6-11. Complies with: EN388:2016 4.X.4.2.B
Strong hook and loop fasteners with universal systemfor molle or belt. Perfect for plate carriers, backpacks and all belt systems. Easy to open and close with additional tab, multi-purpose system for gloves, ropes ,...
Vibrothan® foam technology for optimal vibration dampening protection. Excellent durability and grip performance due to Microthan® synthetic leather. Vibration reducing according to EN ISO 10819, Reinforced index finger and little finger, Reinforced seams, Reinforced fingertips, Padded palm, Pre-bent fingers, Specially designed thumb, Ergonomically shaped, Specially designed details. Sizes: 7-12 EN388:2016 2.2.2.2.X
Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments. 18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12. Conforms to: EN388:2016: 4.X.4.3.F.P
High-quality ambidextrous nitrile disposable gloves, specifically designed for use in laboratories and non-sterile pharmaceutical en vironments. The optimized nitrile formula (acrylonitrile butadiene) offers comprehensive protection against chemicals and chemotherapy drug spla shes without compromising comfort. Latex and silicone-free. Food-approved. Length: 240 mm Sizes: XS to XL Compliant: EN374: Type B: JKOPT, VIRUS
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Warm, insulating gloves with RIPEL™ technology provide fully water-proof gloves. Leading dexterity among liquid-proof cold weather gloves. PVC-foam coating stays flexible down to -25°C, food approved.
Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
Cow grain leather glove with cotton back, semi-lined. Sizes: 8-11.
Seemles knitted nylon-spandex gloves (18 gauge) with insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemles knitted nylon-spandex gloves (18 gauge) with 3/4 insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 7-11.
Tropic glove in synthetic leather with cotton back and velcro closure. Sizes: 7-11.
Synthetic leather glove, Unlined, 0,7 mm, Microthan®+, Diamond grip pattern, Nylon, Cat. II, Black, grey, yellow, Chrome free, Reinforced seams, Velcro®, for assembly work . Conform EN 388:2016: 2.1.2.1.X
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Medium duty impact glove with slip-on cuff and double-layer palm made of cut-resistant synthetic leather. TPR impact protection with ANSI / ISEA 138 score 2. Reinforcement around the index finger to protect abrasion-sensitive areas. Highly visible for extra safety. Sizes: 6-13. Conforms to: EN388: 2016 3.X.4.3.E.P
Chemical resistant PVC glove with impact and cut protection. TPR impact protection on top of the hand and full length of fingers. PVC coating for waterproof and chemical resistance. Inside liner provides all round 360 degree cut resistance. Durable textured palm coating for enhanced grip. Sizes: 8,10 and 12.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Green powder-free nitrile glove with EBT Technololy: biodegradation occurs in biologically active landfills within 1-5 years. Decreased risk of allergies, latex free, food approved. Sizes: XS(5-6) to XXL (10-11). Length: 24 cm. Thickness: 0,10mm. Package: per 100 gloves! Food approved.
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
Constructed with a rough-finish triple-dipped PVC coating, this chemical protection glove prioritizes wearer safety and comfort. A seamless, soft cotton liner wicks away moisture to prevents odours, and the ergonomic design reduces hand fatigue. The rough grip offers high-performance precision in greasy or damp environments. Sizes: 9(L)-11(XXL). In line with EN388:2016 4.1.2.1.X, EN ISO 374-1:2016 Type B: JKL
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Very abrasion-resistant glove with innovative ErgoShield protection: TPR impact protection on the back of the hand, tight fit. Semi-fingerless design ensures perfect control during weapon operation and touch screen devices.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 20 mil/0.50mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 en EN421
Highly dexterous glove with high cut resistance. Nitrile foam coating with Aerofit technology (up to 30% thinner). Breathable 21 gauge liner. Food approved. Touchscreen compatible. Sizes: 5–12 Compliant with: EN 388: 3X32F
Chlorinated and powder‑free disposable nitrile glove with excellent fingertip sensitivity and a fingertip grip pattern. Easy donning and doffing. Food approved and touchscreen compatible. Thickness: 0.11 mm / 2.36 Length: 240 mm Compliant with: EN 374‑1: Type B JKT, EN 374‑5: VIRUS
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
Cut protection glove (cut F) made with CRF cut-resistant technology, nylon and elastane. Leather in palm for extra protection when handling bulky and heavy metal pieces. 13 gg glove with no dipping. Extended cuff length to protect wrists. Withstand contact heat up to 100°C for max. 15 sec.. CAT II . In line with : EN 388:2016+A1:2018 4X43F - EN 407:2020 X1XXXX - EN ISO 21420:2020
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
HPPE glove, 13 gauge. Sandblasted foam nitrile coating on the palm and fingertips; elasticated wrist. Maximum abrasion and tear resistance. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Extreme finesse. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.3.1.C
RubyCut fiber knitted glove, 18 gauge. Foam nitrile coating, nitrile reinforcement thumb/index. Wrist with elastic tightening. Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.4.2.D
Knitted glove made of 51% recycled polyethylene, polyester, lycra, 15 gauge. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. GRS and Oekotex certified. Sizes: 7 to 11. Conforms to: EN388:2016: 3.X.1.1.A
Knitted glove made of HPPE and cobalt (without fiberglass), 13 gauge. Double RGO GRIP coating (nitrile + microfoam-nitrile) on the palm the back. Elasticated wrist. Touchscreen. Sizes: 7 to 11. Complies with: EN388:2016: 4.X.4.3.D, EN407:2004: X.1.X.X.X.X
Impact resistant glove for demanding environments. Large back coverage. Touchscreen. High visibility colours for improved hand gestures. Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X
Glove with excellent grip in oily environments, preventing slippage and injuries. Fully and triple coated with nitrile foam in the palm and a latex-free cuff. Cut protection level C and reinforcement between thumb and index finger. Knitted 18 gg liner with cut-resistant CRF® technology and 30% recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016 + A1: 2018: 4.X.4.2.C, EN407:2020: X.1.X.X.X.X
Glove with excellent grip in oily environments. Waterproof and with chemical approval type C. Fully and triple coated with nitrile foam, and with a long cuff. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X, EN374: TYPE C
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Light seamless glove with micro-porous nitrile coating on the palm (0.84mm). Finger-sensitive with good grip on wet or oiled components. Ultralight (19g) Microfibre carrier. Latex-free. Sizes: 6(S)-10(XXL).
Ultralight design: 20% lighter. 13 gauge. Enhanced Fortix® technology: 20% more abrasion resistance. 12 times higher cut resistance (vs. standard HPPE) using Next Generation single strand HPPE yarn developed with INTERCEPT(TM) cut resistance technology. Nitrile coating. Oeko-Tex certification. Food approved. Sizes: 6-12. Conforms to: EN388:2016: 4.X.4.3.F. EN407: X.1.X.X.X.X
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement. Sizes: 6-12 Complies with: EN388:2016 4X43FP
