BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
emporary, horizontal safety line made of polyester webbing with a maximum length of 20 metres. Safety line can be stretched between twopoints with line tensioner. Includes two carabiners and anchor points inthe webbing, one metre from the ends, for attachment to all sorts of constructions. Sold in handy storage bag. May be used for fall protection for two people.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1.5m. Anchor point for protection of one person.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of one person.
Adapter to mount Rebel fall-block on leg of tripod AM100.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Equipped with 1 D-ring. A loop can be formed by passing the webbing through the D-ring. Can also be used on vertical constructions. Length: 0.9 metre. Weight: 445gr. Anchor point for securing 1 person.
Portable counterweight anchorage that can be placed easily on a flat rooftop to connect maximum 2 workers to an anchorage point. Contains 12 loads of 24 kg, a base and D-ring. In line with EN795E. Transport cost included.
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length: 0.6 metres. Anchor point for protection of one person.
Mobile and universal anchor point, for use by 1 person.
Mobile davit arm 6m to enable fall protection on vehicles, containers, etc. for loading and unloading materials and/or general inspection and repair purposes. Rotating arm, suitable for 1 person. Including 3 concrete slabs of +/- 1000Kg each and fall arrest block steel cable 10m. Price includes transport. Price for mounting upon request.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Temporary horizontal lifeline in galvanised steel with a maximum length of 18 meters. Lifeline using line tension can be stretched between two points. Equipped with a snap hook to the hard plastic case and a carabiner on the end of the cable to be attached to various structures with anchor points. Housing provides a sturdy zinc handle with the carabiner attached to it. Weight: 11.25kg. Lifeline Thickness: 6.25mm. Strength: 24.5Kn. Serves 2 persons.
Anchorage for I-beams ranging from 6.35 to 45 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Floor mount base high capacity in galvanised steel. Fixed base for high capacity davit arm. Horizontal structure on concrete or metal. When used with davit arm, in line with: EN795 type A, EN1496 Class B.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
D-ring combination concrete, sturdy design for heavy conditions. Safe 'hook up' indicator lets the user see if it is properly installed. Install in holes of 18 or 19 mm. Only standard drilling required.
Sling sleeve anchorage system for temporary anchoring around a rigid support. Diameter:6 mm , lenght: 2m. In Line with EN795
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 5m. Anchor point for protection of one person.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
Self-contained fall protection system, mobile anchor rail with a length of 6m. Different configurations possible. For access to eg trucks, containers, tankers,... Including 4 concrete slabs of +/- 1000Kg. Price includes transport.
Movable tanker ladder with extra safety railing. Price includes transport. Price for assembly on demand.
Mobile anchorage for temporary anchoring in a concrete surface. For anchoring only 1 person. Suitable for horizontal and vertical ap plications.
Steel adapter set (composed of FA 60 101 01a to be installed on tripod FA 60 101 00 or FA 60 102 00 - and FA 60 101 02P to be installed on winch FA 60 003 20/ FA 60 003 30/ FA 60 023 20/ FA 60 023 20R)
I-beam trolley for I-beams ranging from 76 to 203 mm. Maximum thickness of I-beam: 17 mm. Easily follows the movements of the anchor ed person. Can be used in combination with a safety line or fall-protection block.
Adapter for mounting sealed block on davit arm.
Anchor lance, synthetic material, extendible from 1.8 to max. 7.8 metres. Forms an anchor point in combination with carabiners with AP168 cord. Ideal for attachment of a temporary vertical safety line for safe vertical movement. Temporary vertical life-line with line clamp, can be attached to eye of carabiners. Anchor lance cannot be removed until protection is no longer required. Weight: 2.5 kg.
Adaptor to connect the old davit arm with the new fixed base No PPE.
I-Beam anchor trolley width 80 to 250mm for 1 person. Maximum weight: 136kg.
Container anchor post (lenght: 92,5cm) intended as a temporary anchor point for work on top of ISO shipping containers (10ft, 20ft and 40ft). Comes with a side latch and marker line for safe 1-person installation. can also be used to attach a horizontal lifeline to the top of the container. Always to be used in combination with a harness and fall block. Static strength: 12kN, minimum breaking strength: 15kN.
Window <(>&<)> door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Adapter for mounting winch advanced on DBI-Sala davit masts.
Davit mast 144 cm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Adaptor to connect the fall arrester rebel with winch 15m to the new davit arm. No PPE.
Temporary horizontal lifeline in 16mm core jacket rope to be used with 2 container anchor posts Conte Post (1061610). Suitable for 1 or 2 users. At each end of the lifeline is 2m of red rope, intended to prevent access to hazardous areas (container ends). Supplied with 2 salen triple action locking musketon hooks and a transport bag. Total length: 14m, minimum length: 5m. Static strength: 18kN, minimum breaking strength: 23kN.
U-shaped base for Davit arm. Width adjustable from 1,9m - 2,6m.
Wall base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. Dimensions: W25.4 x D 19 x H 32,4 cm. Other feet or mobile bases for the davit arm are available on request.
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
Anchorage points designed to be installed on platforms, bridges, horizontal surfaces mad up of pressed steel gratings with min.mesh 30mm x 30mm. Simple light and easy to install. Designed to be used with a fall arrester system, but can also be used with work positioning or restraint system. Provided with 3 different lenghts of wire rope slings (250mm, 500mm, 750mm) as well as a 8,5m long cordd to facilitiate installation of the fall arrest system. Weight: 3,75 kg.
I-beam anchor for I-beams ranging from 100 to 330 mm. Suitable for 1 person and to combine with a fall arrestor or safety line. Atex approved.
Moveable anchor point designed for use on a low parapet wall. Easy to install without tools, does not damage the structure of the wall. For walls from 60 to 320mm thick. Suitable for 1 user.
Adaptation kit to attach fall arrestor kalypso 30m (1062543/1063980) with winch to tripod 1062545/1063976.
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.52m to a maximum of 2.9m. Weight: 15kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
Ideal for installation and use on large structures (skydomes, trees, beam anchors, posts, etc.). Can be used with a horizontal temporary lifeline. Two elastic loops to hold the free end during use. Has a small Velcro strap to keep the lifeline coiled up when not in use. Minimum breaking strength > 24 kN.Static strength > 18 kN. Max length 5m, width: 45mm.
Telescopic pole in fibreglass extendable from 2 to max 8M. Ideal for attaching a lifeline from the ground. Voltage resistance: 50kV. Forms an anchor point together with the musketon (1060634).
Aluminium musketon to be used with anchor lance (art.1060633) with jaw opening of 60mm. With eye to attach lifeline.
Mobile anchor point in stainless steel for temporary anchoring in a horizontally positioned metal profile. For anchoring only 1 person. May only be used for vertical applications. A 22 to 23 mm hole is required for installation.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
T-shape base for extendible davit arm.
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
Mast adjustable from 1.8 to 3.05 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
Davit arm with boom. Davitarm and base system includes adjustable upper mast, lightweight lower mast and 3-piece lightweight base. Includes mounting bracket for a winch. Order winch and SRL separately. Boom has a universal anchor point for fall-blocks or safety line. In combination with the adapters, fall-protection blocks with or without winch or permanent winches, can also be mounted to the davit. Boom has two roller wheels to guide cable of fall-protection block or winch. The boom is extendible in different positions. Height with boom: max. 2542 mm.
Adaptor to connect short davit arm with old fixed base No PPE.
Cap for fixed base davit arm. No PPE.
Mobile davit arm 6m to enable fall protection on vehicles, containers, etc. for loading and unloading materials and/or general inspection and repair purposes. Rotating arm, suitable for 1 person. Including base for concrente (3000Kg) and fall arrest block steel cable 10m. Price includes transport. Price for mounting and/or concrete pouring upon request.
Movable base with 4 wheels for davit arm RJ200.
Mobile mast of 6 m as anchor point for fall protection above vehicles, containers, etc. so that loading and unloading of materials, inspection and repair actions can be carried out safely. Rotating arm of 2 m suitable for 1 person. Price complete including fall block, transport and assembly.
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.15m to a maximum of 2.15m. Weight: 13kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
