BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Set of 10 quick spins with coil tether to attach tools.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Safety bucket designed for use at height, with a closure system which can prevent objects from falling. Piercing-resistant plates secured in the base of the bucket. With small pockets for storage of tools.
Set of 25 heat shrink tubing to protect quick wrap tape from abrasives and harsh working environments. Heat shrink tubing shrinks 200% when heated. No PPE.
Set of 10 heat shrink tubing to protect quick wrap tape from abrasives and harsh working environments. Heat shrink tubing shrinks 200% when heated. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 5,48m. No PPE.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic.
Removable hook for attaching to a harness and hanging tools, or to the hooks of a lanyard when not in use. This is not an anchor point for fall protection or rescue under any circumstances!
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
Extra deep tool belt holster.
