BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Adaptor to connect short davit arm with old fixed base No PPE.
Cap for fixed base davit arm. No PPE.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
Movable base with 4 wheels for davit arm RJ200.
Telescopic pole in fibreglass extendable from 2 to max 8M. Ideal for attaching a lifeline from the ground. Voltage resistance: 50kV. Forms an anchor point together with the musketon (1060634).
Adaptation kit to attach fall arrestor kalypso 30m (1062543/1063980) with winch to tripod 1062545/1063976.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 9L.
No PPE.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic.
Removable hook for attaching to a harness and hanging tools, or to the hooks of a lanyard when not in use. This is not an anchor point for fall protection or rescue under any circumstances!
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Adaptation kit to attach fall arrestor kalypso 10m with winch (1063977/1063978) to tripod 1062545/1063976.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm