BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Fall arrest device 2.4-metre strap with integrated shock absorber in backpack style with 2 self-locking hooks. Plastic housing. Stops almost instantly any vertical fall movement. Serves as connection between anchor point and harness. Also usable at fall factor 2 and tested for use near sharp edges.
Fall arestor 20-metre stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Atex fall arrestor with steel galvanised cable and integrated rescue winch, can be attached to Kratos tripod 1063976/1062545 using adapter 1062544. Max user weight: 140kg (vertical use).
Adaptation kit to attach fall arrestor kalypso 30m (1062543/1063980) with winch to tripod 1062545/1063976.
Mobile and universal anchor point, for use by 1 person.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in environments with potential electrical hazards. Maximum user weight: 100kg.
Antistatic lanyard with 44mm wide webbing and aluminum hooks (one large and one small with manual locking). Length including snaps: 2m. For a maximum user weight of 100kg. Suitable for use in Atex zone 1.
Wrist strap with a 120mm line to attach tools weighing up to 2kg to prevent them from falling when working at height.
Evacuation sling made of polyester/cotton with adjustable shoulder straps. Can easily be fitted to unconscious person. For safe evac uation of a person requiring assistance, in combination with an evacuation device such as made by Rollgliss. The three ends are brou ght together and connected to a single carabiner in order to evacuate the person.
Rope clamp for kernmantle ropes from 8 to 13 mm. Facilitates lowering of hoisting of a person using the Rollgliss system if the clamp is mounted on the rope of the Rollgliss. In compliance with: EN341.
Safety lanyard without absorber. 1M braided rope in white polyamide with diameter 10,5mm. Rope with 2 sewed thimble loops, identification thread and yellow and red wear indicator. Only to use for positioning.
Very robust fall-prevention device with winch, 25 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 23 kg.
Descent and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head & materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use.
Safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Fall-stop device with 2 metre flame retardant strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Zinc-plated steel double action 1/4 turn carabiner, opening 17 mm, resistance of the mechanism opening 16 kN.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Ajdustable wristbandt with retractor and trigger snap (10 pack). No PPE.
Extra deep tool belt holster.
1 day on-site training fall protection by 3M with the Demo Van. Content and location according to your needs.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
Equipement carrying and storage bag duffels style bag (300x500mm). Built-in adjustable webbing shoulder strap. Drawstring closure, durable canvas construction, compact and lightweight design.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Set of 10 quick spins with coil tether to attach tools.
Set of 10 spiral cords with hook and quick ring. Length: relaxed 7,6cm, extended 157,5 cm. For tools with max weight of 0,9kg.
Very comfortable seat harness specially developed for the oil and gas industry. Features ultra-lightweight aluminum D-rings, Belly Board attachment points. Transit buckles, integrated trauma straps, seat with D-rings for upright support. Reflective material and orange bands for high visibility. Repel strap, revolver vertical torso adjusters, and hybrid comfort pads and extended 30cm back anchor point. Maximum user weight including material: 140kg. Sizes: M-L-XL. Compliant: EN361, EN358, EN813
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Kernmantle rope diameter 12.5mm. For individual use or in combination with rope clamp AC4000, AC4001 or AC4002
Universal lower mast for high capacity davit system, already equipped with the (1045265) adapter to mount the winch advanced
Fall arrester with 2 self-retracting lanyards that can be attached directly to the back of most harnesses. Provides continuous fall protection and extra mobility when moving from one location to another. Replaces the double lanyard and improves safety by shortening the fall distance. With 2 aluminum large (63.5 mm) Comfort Grip hooks (can be attached crosswise to, for example, the beams of ladders) and 1-pin SRL coupling made of galvanized steel. Max user weight including material: 140 kg.
Yellow stainless steel anchor point for wind turbines, rotable with stainless steel mointing hardware. Use for 1 person included gear with maximum weight of 140 kg.
Stainless steel carabiner automatic closing, opening 22.5 mm, weight: 230 gr. Breaking force: 25kN.
Harness for heat applications made from Nomex on Kevlar carrier with 2 anchoring points. Combustion temperature 425°C. Easy to put on due to delta shape on the back. Test weight: 140 kg, Sizes U-XL.
Fixed foot for mounting telescopic davit arm.
Telescopic anchor pole extendible to 145 cm. Supplied with 3 anchor points that ensure that the anchor point is high enough for working at lower heights. Ideal for transformers and other low-level structures. For use with floor foot (Art: 1023920). Can be easily disassembled if not in use.
Very robust fall-prevention device with winch, 40 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 30 kg.
Very robust fall-prevention device, 40 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 30 kg.
Rescue and descent device with rotating wheel and 9.5 mm kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims. Suitable for rescue operations in hard to access locations and heights.
Base for wall anchor with catch without eye (Art: 1026247). For use on floors, walls or ceilings. Provides a convenient attachment point where necessary. One-press button to ensure faster operation. The tube has a cover-plate to cover the hole and penetrate the surface.
Wall anchor with catch: Package consists of catch, a tube, an M6 Allen key and a cover plate. For use on floors, walls or ceilings. Provides a convenient attachment point where necessary. One-press button to ensure faster operation. The tube has a cover-plate to cover the hole and penetrate the surface.
T-shape base for extendible davit arm.
Fall-prevention device, 9 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked, even if there is a recoil after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use.
Double safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Eye for wall anchor (Art: 1026246). For use on floors, walls or ceilings. Provides a convenient attachment point where necessary. On e-press button to ensure faster operation. The tube has a cover-plate to cover the hole and penetrate the surface.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Rescue and descent device without rotating wheel and 9.5 mm kernmantle rope for rescue or evacuation of you, a second person or any victim from height. Suitable for rescue operations in hard to access locations and heights.
Mast adjustable from 1.8 to 3.05 m with rotating head & materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
Fall-prevention device, 25 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use.
