BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Kernmantel rope 11mm diameter with aluminum snap hooks, including one scaffold hook. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Very robust fall-prevention device, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 9 kg.
Very robust fall-prevention device with winch, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Adaptable to most walkie-talkies and phones. With D-ring. Can be attached to a belt or harness Not PPE.
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
Anchor lance, synthetic material, extendible from 1.8 to max. 7.8 metres. Forms an anchor point in combination with carabiners with AP168 cord. Ideal for attachment of a temporary vertical safety line for safe vertical movement. Temporary vertical life-line with line clamp, can be attached to eye of carabiners. Anchor lance cannot be removed until protection is no longer required. Weight: 2.5 kg.
Core jacket rope of 15 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Fall arrest block Rebel 15 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Both for vertical and horizontal usage, if horizontal usage it is mandatory to use a 2 metre webbing sling (art 1026475).
Padded cordura provides for durability and comfort. Waist size S/L (71cm -117cm) No PPE.
Wall base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. Dimensions: W25.4 x D 19 x H 32,4 cm. Other feet or mobile bases for the davit arm are available on request.
Adaptor to connect the old davit arm with the new fixed base No PPE.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
- For tape measures - Includes a retractor - Sleeve allows tape measures to be safely tethered and holstered - Reflective details
- For tools with max weight of 2,3 kg - With 2 carabiners - Line stays staut when reaching, retracts when not in use - With swivel housing connection
Set of 10 clip to clip coil tether non conductive. To attach tools safely and to prevent they drop from height. Extended lenght: 70cm
Rapid rescue device at height; made of aluminum alloy and high-strength steel with 9.6mm diameter semi-static kernmantel rope, assembled with the device. Rope ends with double 8 knots for connection with carabiners which are included. Controlled descent speed: 0.8m/sec for maximum weight of 150kg.
Set of 10 belt loops with trigger hook attachment to attach tools up to 2.3kg.
Extra deep, with innovative self-closing system, making it almost impossible for parts to fall out of the bag. Easy to take things out because no extra action is needed to open the bag.
Black carrying bag made of nylon coated with TPU. Dimensions: 50x24x24cm.
WorkAir by D-Air Lab is the first PPE-certified airbag system for workers at height. Designed and manufactured entirely in Italy, the system protects back, chest and vital organs by inflating within 40 milliseconds in the event of a fall. It can be used without fall protection from 1.2 m to 2 m, and above 2 m in combination with a fall arrest harness. WorkAir uses the "Intelligent Clothing" technology developed by Dainese for motorbike racers and skiers. It is lightweight, comfortable and ergonomic. Also available in Fluo yellow and Fluo orange.
Removable extension strap with D-ring for attachment to the dorsal anchor point of Kratos harnesses from the Premium series, and for use only in conjunction with a fall arrest block. This extension allows for easy anchoring on the back.
Temporary aluminum anchor for door or window frames with dimensions from 60 to 125 cm. For horizontal use only, and suitable for 2 people.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Lanyard in 11mm thick sharp edge kernmantel rope with aluminum self-locking hooks (1 scaffold hook and 1 small carabiner).
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and two aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
Work seat designed to improve comfort during long periods of work. Supplied with 2 quick release buckles and can be attached to the side of the harness Volt light, Volt, Volt Wind and Volt Wind Offshore
Transparent PVC and polyamide cover for protecting fall arrest blocks up to 15 m used outdoors
Cord attached to the carabiner of a high-mounted retractable fall arrester, allowing the carabiner to be easily pulled down to connect to the harness anchor point
16 mm Hercules rope ladder with steel core, ash wood rungs, 40 cm wide, 3 rungs per metre, blue, fitted with two crimped thimble eyes and two eye bolts. The ladder is supplied as standard without an inspection certificate. This can be offered as an option. Price available upon request.
Descender for safe descent of 11 mm kernmantle rope. Equipped with a double safety: clamps the rope if the lever is not pressed or i s pressed too far. This prevents unintended descent in a panic situation. Opening at the bottom to be connected to the harness with a safety line.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 9L.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 7.4L.
Very robust fall-stop device: 10 metre galvanised steel cable, with integrated shock absorber and descent brake. Casing made of coated aluminium. Immediately stops any vertical fall. Serves as connection between anchor point and harness. Equipped with carabiner hook. After a fall, the brake ensures the person descends at a constant speed automatically. This mechanism can be activated in advance or remotely (provided a rescue rod is used). Only for vertical use. Weight: 8.5 kg. Maintainable.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Fall arrest block Rebel 20 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage.Weight: 10kg.
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
all arrest block Rebel 30 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13,4kg.
To anchor tools to avoid tools falling when working at height. Max weight: 15.9 kg. Not PPE.
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably use with seat harnesses. To be operated with a drill. Not for use in enclosed areas.
Anchorage for I-beams ranging from 30.4 to 91 cm. Maximum thickness of beam 6.5 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Holster to fit virtually any hand-held radio, mobile phone and many other devices. With clip2loop coil tether and micro D-ring. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
Movable base with 4 wheels for davit arm RJ200.
White-yellow replacement rope of 2m for positioning line Grillon.
Double fall-stop device 2.5 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2.
Telescopic pole in fibreglass extendable from 2 to max 8M. Ideal for attaching a lifeline from the ground. Voltage resistance: 50kV. Forms an anchor point together with the musketon (1060634).
Aluminium musketon to be used with anchor lance (art.1060633) with jaw opening of 60mm. With eye to attach lifeline.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 5:1 that makes retrieval and descent lighter. Total rope length should be divided by 5 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp which must be operated by a second person, not for self-descent. Max descent capacity: 250kg, max raising capacity: 200kg. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod.
Mobile anchor point in stainless steel for temporary anchoring in a horizontally positioned metal profile. For anchoring only 1 person. May only be used for vertical applications. A 22 to 23 mm hole is required for installation.
