BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
Short jacket with hidden zipper and concealed press studs, 2 front pockets with flap, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra arm support to promote freedom of movement, cuffs with Velcro, extended back and reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66. Available colors: Black / gray, gray / blue, corn blue / navy and gray / red.
Protective cold storage jacket up to -40 ° C! The inner collar was finished in fleece and the extended back, the narrowed sleeves and the knitted cuffs in the sleeves, which also have a practical thumb hole, help to limit the heat loss. The shoulders are provided with reinforcement to prevent wear and also the elastic narrowing in the back is a comfortable plus of this jacket. Inside: Fixed quilted lining, Knitted cuffs in the sleeves with thumb hole, 1 inner pocket. Exterior: Inner collar in fleece, Fitted with hood (hood available separately), Zipper with flap, 1 patched chest pocket with flap 2 inset pockets with flap, 1 sleeve pocket + pen pocket Rounded-in sleeves, narrowed sleeves by means of Velcro closure Shoulder reinforcement, Elastic narrowing in the back, Extended back and Back length 83 cm (L). Fabric: 100% polyamide; ± 185 g / m² + HV - 100% PES ± 220 g / m² - Hi-vis Cordura: 100% polyester ± 210 g / m². Color: fluo yellow / navy. Compliant with: EN 342.
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
Havep Multi Shield multinorm work trousers model 80308
Hi-vis parka 3-in-1: • wind and waterproof jacket with removable inner jacket; • outer jacket with a 2-way zip; • reflective details; • vertical breast pockets; • badge holder; • large side pockets; • detachable and adjustable hood; • adjustable waist; • adjustable cuffs with velcro; • lightly padded inner jacket; • side pockets with zip and internal loop; • inside pocket with zip and telephone pocket. Quality: 100% Polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo orange/black and fluo yellow/navy. In accordance with: EN ISO 20471 class 3.
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
The Multinorm Fleece Jacket is made from 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. This product is EN ISO 11612 (protection against heat and flame) and EN 1149 (protection against electrostatic properties) certified. The fleece jacket is ideal to wear in cold and bad weather conditions. Available sizes: XS-5XL. Available colors: Marine. Compliant with: EN ISO 14116, EN 1149-5: 2008 and EN 14058.
Hi-vis trousers Belenos 12433 with: 2 front pockets; 2 back pockets with flaps; 1 thigh pocket; 1 ruler pocket; Knee pad pockets Cordura. Stretch elements M-move Industrial laundry Quality: Recycled polyester / LYOCELL 65% 35%. Available sizes: 42-66 BE. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 1.
Sweatshirt with short zip made of recycled polyester and cotton.
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Parka with hidden zipper with hidden snaps, 2 front pockets with flap, 2 inset chest pockets with right chest pocket with D-ring for badge holder, detachable hood with drawstring, zip-in lining is available separately, escape mask loop, cuffs with Velcro, extended back, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: S-3XL. Available colors: corn blue / navy, gray / blue, black / gray and gray / red. Complies with: EN 1149-5, EN 13034 type 6, EN 343 3: 2, IEC 61482 class 2, EN ISO 11611 class 1 and EN ISO 11612 A1A2.B1.C1.E2.F1.
Hood, 48.5% Meta-aramid, 48.5% viscose FR (lenzingFR), 3% belltron.fire retardant, long collar, oval face opening. Available color: blue. Sizes: 1 size.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-5XL. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 3 and EN 13758-2.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Green FR coverall with elasticated wrists and hood suitable for use with helmets fitted with an elastic drawstring. Specially designed to provide extra protection against heat, flames and electrostatic hazards. The cotton in the fabric provides extra comfort while the PVC coating offers optimal chemical protection. Garment can be machine washed.
Shirt, 60% modacryl 34% cotton 2% negastat, 220 gr./m², flameretardent, antistatic, long sleeves, round collar, double-layered back and shoulder piece. Available in: navy.
Multirisk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at the waist. Quality: 79% / 20% / 1% Kat / Poly / AS. Available sizes: 44-66 HAV. Available colors: Blue / gray, gray / yellow and black / gray. Conforms to: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Heated body warmer. Battery must be ordered separately.
Piqué polo shirt with short sleeves from the Progression collection, enhanced visibility EN17353.
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
This multinorm Dapro coverall is tough and comfortable. The coverall has an adjustable elastic at the waist for the perfect fit and a front closure with a welding proof flap construction. Available sizes: 44-70 NL. Available colors: Navy and royal blue
Signaling waistcoat RWS Carpi: V-neckline; Velcro closure; Back length 70 cm (L). Complies with: EN ISO 20471 class 2.
Hi-vis shell jacket 4680, class 3. Concept: Trofta
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Made from an inherently flame-retardant, breathable and supple fabric, harmless to the skin, this jacket offers excellent arc protection, and protection against heat and metal splashes. It is equipped with double-stitched reflective FR strips for increased visibility. The tailored jacket is anti-static and resistant to wear, shrink and pilling, even after frequent washing. Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g/m². Available sizes: 44-64 EU. Available colours: Fluo orange/navy.
Hi-vis fleece jacket with zip, 2 inset side pockets with concealed zip and reflective tape. Quality: 100% polyester, ± 235 g / m² Available sizes: S-4XL. Available colors: Fluo orange and fluo yellow. In accordance with: EN ISO 20471 class 2.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
Hi-vis polo with long sleeves, navy collar, 3 button placket, horizontal and vertical reflective tapes. Quality: 55% Cotton, 45% Polyester, Knit, 175g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy, Fluo orange / navy. Conforms to: EN ISO 20471 Class 2.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
Polo, 60% modacrylic 39% cotton 1% carbon, 200gr./m², flam retardant, antistatic, long sleeve, 3 button placket. Available in: navy, black and grey.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Flame retardant and antistatic neckwarmer (buff) in Nomex® and meta- aramid polar fleece. Keeps bodytemperature in cold environments. Protects against heat and antistatic risks. Available size: universal. Available colour: paris blue.
Hi-vis t-shirt Belenos 12702: - v-neck; - short sleeves with rib; - segmented reflection on the front, back, shoulders and sleeves. Quality: Cotton / PES 60% / 40%, 180g / m². available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2.
Hi-vis ladies T-shirt for ambulance drivers with contrasting V-neck, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 67% polyester / 33% cotton, 150gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-3XL. Conforms to: EN ISO 20471 Class 2.
This Safety vest provides extra comfort for the wearer through a zipper. Please note: the size combination XS-S is certified according to EN ISO 20471: 2013, Class 1. The safety vest has a stitched striping. Quality: 100% polyester, Warp knit, 120 g / m². Available colors: Fluo Orange and Fluo yellow. Sizes: XS / S - 5XL. Conform: The Rijkswaterstaat guidelines are applied, just like the EN ISO 20471: 2013 / Class 2 standard for High Visibility.
Lightweight / Comfortable and breathable fabric, soft <(>&<)> supple / Inherently flameretardant properties / Very good moisture management properties / Non-allergenic and harmless to the skin / Reinforced seams for an increased durability and longer lifetime / Higher abrasion resistance / dimensionally stable / excellent pilling resistance. Quality: 31% polyester + 28% modacrylic + 20% aramid + 20% viscose FR + 1% AST. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
Premium sweater with hood and 2 side pockets which can be closed with a zipper. This item also has an arm pocket that can also be closed with a zipper. The inside of this sweater provides extra comfort. Quality: 80% Combed Cotton / 20% Polyester, American Fleece, 300 g / m. Available sizes: XS-3XL. Available colors: Navy, Bordeaux, black and gray.
This 2-layer hi-vis softshell with reflective strips has been specially designed for women. The chest pocket and the two side pockets are provided with zippers, while the sleeve narrowing is done with touch and close fastening. The Jerica is finished on the inside with fleece and one inside pocket for extra storage. Thanks to the handy I.L.S. system, this softshell can be perfectly zipped into the Talia raincoat. Quality: 2-layer bonded softshell: 100% polyester stretch + 100% polyester fleece inside; ± 250 g/m². Available sizes: XS-2XL. Available colours: Hi-vis yellow and hi-vis orange.
Flame retardant signaling vest (RWS) Flame retardant mesh / Stitched seams / Exterior: V-neck / Zipper / Back length 70 cm (L). Quality: 98% polyester + 2% AST; ± 120 g / m². Available sizes: M-3XL. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 14116, EN ISO 20471 class 2 and EN 1149-5.
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
Flame retardant work jacket with increased visibility in a light and comfortable cloth with high tear resistance. Concealed zipper with press studs front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Completely metal-free. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6.
Forest trousers with frontal protection type A, fly with zipper - closure with 1 button, 2 inset pockets, 1 patch pocket with zipper, 1 patch pocket for pleat and system for attaching the spark plug wrench, elastic waist with loops for belt and loops for suspenders with velcro. Quality: 65% polyester - 35% cotton lining 85 g / m². Available sizes: XS-4XL. Available colors: Grjis / black.
Multirisk Softshel Diablo: Invisible zip at the center front; Raglan sleeves; 1 vertical chest pocket; 2 front pockets; 1 inner pocket; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and cord stopper. Quality: 34% MODACRYL, 28% POLYESTER, 21% COTTON, 16% PU, 1% ANTI-STATIC. Conforms to: EN 1149-5: 2008, IEC 61482-2 class 1, EN ISO 14116: 2015 IND 3, EN 13034: 2005 + A1: 2009 TYPE PB [6], EN ISO 11612: 2015 A1 B1 C1 F1, EN ISO 20471: 2013 + A1: 2016 CLASS 2 and EN ISO 11611: 2015 A1 CLASS 1.
Men's short-sleeve polo shirt made from 100% cotton.
Jacket for signalisation, 100% polyester, 2 retro-reflective stripes. Available colours: yellow, orange and red. Available sizes: S/m to 4XL/5XL.
Overshoes, Micromax, elastic, PVC non-slip sole. Suitable for : agricultural and food industry. Colours: white. Sizes: XL= 31cm.
Flame retardant work trousers with increased visibility in a light and comfortable fabric with a high tear resistance. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring. Ruler pocket. Pre-shaped knees with height- adjustable knee pockets on the inside. Completely metal-free. Reflection on the pipes. Quality: Tera TX, 260 g / m², Available colors: Fluo yellow / navy. Available sizes: 44-46, 146-156, 24-30. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6], TRANEMO SKINSAFE ARC RATING: 9.5 cal / cm².
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Women's work trousers with class 2 arc flash on the front. Double cloth and anti-static properties, meets 6 standards and is made of cotton/polyester.
Men's fleece with full zip from the Progression collection, enhanced visibility EN17353.
Stretch trousers for men with knee pockets from the Progression collection, enhanced visibility EN17353.
Jacket, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², covered press-stud fastening, 2 front pockets with flap, breast pocket with flap, inside pocket, back pleats, sleeves with adjustable press-studs.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Raincoat in heavy PU quality. Oil and cold resistant. Wind and waterproof. Suitable for food industry. • Fixed hood with elastic • Concealed zip with press stud fastening • Sleeves adjustable with press stud fastening • Washable at 95 degrees Quality: 50% polyester, 50% polyurethane, 240 g / m². Available sizes: XS-4XL. Available colors: blue and white. In accordance with: EN 343 3.1, EN 13034 and EN 1186.
Hi-vis softshell Belenos 12653 with: Waterproof zipper; 1 vertical chest pocket; 2 front pockets; 1 inner pocket with velcro; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and 1 cord stopper on each side. Available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2.
Flame retardant work trousers in a light and comfortable fabric with a high tear resistance. Back pockets with flaps. Cargo pocket with flap, telephone pocket and concealed key ring. Ruler pocket. Pre-shaped knees with height -adjustable knee pockets on the inside. Completely metal-free. Quality: 811: Tera TX, 260 g / m², LOI: 29.8%. Available sizes: 44-64, 146-156, 96-120 EU. Available colors: Navy. Conforms to: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: APC 1, EN 1149-5, * EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6].
Hi-vis pull-over / Soft / Fabric / Grey fi nish at cuffs and collar / Elasticated reflective tape for improved comfort / Decorative seams / Outside: Straight collar / Hidden zip closure / Round inset sleeves / Knitted wind cuffsin sleeves / Back length 72 cm (L) / Fabric: 71% molleton polyester - 25% viscose - 4% elasthane; ± 280 g/m² Colour: 707 hi-vis orange/grey - 856 hi-vis yellow/grey
This fully certified combat trouser in a contrast navy colourway has a multitude of clever features. The predominantly Navy colourway ensures that your trousers look great and keep clean for longer. Durable polyester/cotton fabric with Texpel stain resistant finish 50+ UPF rated fabric to block 98% of UV rays Reflective tape for increased visibility 8 pockets for ample storage Phone pocket Rule pocket D-ring for keys or ID cards Elasticated back waist for a secure fit Certified to EN ISO 20471 after 50x washes CE certified Two back patch pockets Side access pockets Contrast colouring for added style Premium stain resistant finish repels oil, water and grime Triple-stitched seams for extra durability Twin-stitched seams for extra durability. Quality: 65% polyester / 35% cotton. Available sizes: S-2XL. Available colors: Fluo yellow / navy, fluo orange / navy. Complies with: EN ISO 20471 class 1.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
DuPont™ Tychem® 2000 C Sleeve model PS32LA. Stitched and over-taped seams. Yellow.
Flame retardant women's chino pants with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
The Frovik is a bomber jacket which you can wear in many situations. The fluorescent colour and segmented striping will keep you safe in any light conditions. The Siopor Excell fabric protects you against the rain and against many industrial hazards including the thermal risks of an electrical flashover. A surplus is the light weight of the fabric. The bomber jacket comes with a flame retardant fleece lining (index 3) which can also be removed. The wind is kept out by the elastic wrist bands that can be narrowed and by the standing collar to which a hood can be attached. The separately available hood can be stored in the special purpose inside pocket. Class 2 ARC protection can be obtained by combining the bomber jacket and the fleece lining.Complies with: IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034, EN ISO 20471, EN 343, EN 61482-2, EN ISO 14116 and EN 14058. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
Dupont Tyvek® 500 HP (Harness Protection) TY178S HP coverall with four D-ring sleeves attached to the garment.
Functional and sustainable high-vis jacket made of lightweight organic cotton and recycled polyester.
