BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Fire resistant rescue hood that can be connected to the second terminal of a compressed air device. Once connected to the blower, the victim is supplied with fresh air. Visor treated against fogging. Is stored in a fire retardant and waterproof bag.
Insert for prescription glasses for full face mask Promask. No PPE.
Plugs designed for Versaflo hoses BT. These are used to prevent contamination of the hoses when they are stored. Pack of 5 Pieces. No PPE.
Extra mouth piece for trainer selfrescuer M20 devices.
Filter holder including strap to carry the filters of the half mask on the back, making the mask more compact and can be worn, for example, under a face shield.
PVC belt for remote filter holder (1058602).
Kit includes: 2 interior and 4 exterior shields, 1 clear spare visor plate, 1 protective breathing tube cover, 2 spare face seals
Front seal as spare spart of hoods M-106, M-107. No PPE.
Storage box for motorunit kit proflow asbestos: 1058093
Set of 2 hinge mechanisms for welding helmet G5-01.
Light bracket in durable polymer, can be used with a series of wired and wireless mining lamps. Easy to install and adjust for a desired lamp corner. For example, designed that the visor of the M-series air hoods can be lifted without removing the lamp.
Head harness in butyl/NR as a replacement for the FF-600 mask. Clean with a damp cloth and household detergent.
Protective foil for visor on Shogun full-face mask. Protects the visor against scratches and liquids.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).
Head harness as spare spart of hoods M-106, M-107. No PPE.
Communication adaptor for 3S-P mask.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
Connection joint for expiration valve for full face masks of the 6000 series 3M.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Device for practicing the use of the self-rescuer M20.2 with hood. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Spare mouthpieces sold seperately.
To be installed on Sundström filter system.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-300.
Connection piece for S-series air caps. Connection piece for attachment on back of cap which makes that the air tube can be attached to the cap. Also needs a sealing ring to attach.
Sealing ring for S-series air caps which permits to attach the connection on the hood.
Replacement spare part, for use if the original air duct becomes worn out or dammaged during use.
Buttons for the frame of the screen as spare spart of M-series hoods. 10pc
Anti-fog inner protection plate (visor) for welding hoods 9100XX, G5-01 and G5-03. (pak of 5 pieces).
Pac de 10 peel-off visors for Cleanspace masks.
Lightweight drawstring bag designed for convenience. Featuring two drawstrings attached to the bottom corners, it can be comfortably carried over the shoulder or as a backpack.
Carrying harness consisting of two shoulder straps and one hip belt to comfortably carry SSR30/100 B on the body in both the unopene d and opened position.
Changeover valve or automatic changeover valve for work that requires use of compressed air for breathing and where an interruption of the air supply could be life threatening. Changeover valve with one connection for air hose from compressed air line and one conn ection for air hose from compressed air apparatus. Primary source is the compressed air line and secondary source is the compressed air apparatus that functions as a backup if the supply from the air line is cut off. When the device is switched from the primary to the secondary source, a whistle sounds. For use with BD Mini, DB 96 and Airmaxx compressed air systems.
Bitter test liquid (low concentration)for performing fit test. Content: 55 ml.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Filter holder.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
Visor for air hood Simplair.
Welding lens attachment for Ultra Elite full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
Air deflector as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
Vaporiser to vaporise liquid in hood of fit test FT10.
Adapter for mounting communication on Eltra Elite mask.
For T-AirWeld 820 (T-Airline)
For T-Airweld 500 (T-Airline)
Removable window for T-Airvisor hood.
Face Seal T-AirVisor (T-AirLine), elastic cotton on PVC frame.
Adjustable head harness with contoured air duct, aiflow indicator and sweatband for T-AirVisor and T-AirWeld headtops.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
