BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. This version does not have a filter (to buy seperately). Possibility to adapt with Peltor earmuffs.
Half mask in TPE with replaceable low profile A2P3 filters. For protection against most organic gases and vapours, dust, metal fumes, mists and micro-organisms. Article replacement filters: 1062247 (SPR670)
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles. The new IonicAir filter technology reduces breathing resistance by 30%.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, M-206 hood, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(><)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).
Head harness as spare spart of hoods M-106, M-107. No PPE.
Black compressed air hose, 5 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
The 6-position battery charger organizing stand for Adflo battery chargers provides the ability to charge six batteries at the same time (you still need individual charger per battery). Saving both time and hassle. Compatible with legacy NiMH batteries and the new Li-ion batteries. Flexible installation: either mount on wall or stand-alone.
Communication adaptor for 3S-P mask.
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator to combine with T-airline regulator kit. To be used for working with motor unit. In line with EN 14594:205 Class 4A
8/12 mm plastic spiral coiled tube made of PU 6M. Coated for good protection against sparks, e.g. during welding. The hoses are delivered complete with safety couplings/nipples
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator.PE breating hose combined with T-airline regulator kit. To be used for working with compressed air. NPF 2000 In line with EN 14594:205 Class 4A
Device that is used as a separate compressed air unit or combined with a long-term valve (supplied) to serve as a backup when working on the compressed air network. Including 3S mask and regulator. With emty 2L composite bottle (15 minutes).
Large prefilter for Cleanspace motorunits, Ultra and EX. Pack of 20 pieces.
Cleanspace combined filter A1P3. Suitable for protection against airborne particulate (dust, mists and fumes), organic gases or vapours (boiling point >65°C). Weight: 200g.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
Gas filter A1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. Can be used in combination with the Sundström half and full face masks.
The easy-to-attach fan reduces build-up and moisture from the 4000+ half masks (4251+,4255+,4277+,4279+), keeping you cool during long working days.
Breathing hood in Tychem 2000 together with a bump cap and breathing hose. To combine with the motorunit PX5 or with compressed air system.
Connection joint for expiration valve for full face masks of the 6000 series 3M.
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete chemical resistant air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Complete motor unit kit consisting of SR500 motor unit, SR570 (bump) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Device for practicing the use of the self-rescuer M20.2 with hood. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Spare mouthpieces sold seperately.
Protects against organic and inorganic gases and vapours sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives.
Antistatic and heat resistant compressed air hose with a diameter of 9.5/19mm made of polyester reinforced with EPDM, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
The Sundström SR 200 Airline is a breathing apparatus that is supplied with a continuous flow of air and is designed for connection to a compressed air supply. The unique feature of the SR 200 Airline is the scope it provides for filter back up. The breathing hose can be released from both the facepiece and the control valve. The equipment can then be used as a filtering device. The SR 200 Airline can be used as an alternative to filtering devices in all situations in which the latter are recommended. This applies especially if the user is doing hard or sustained work, and if the pollutants have poor warning properties or are particularly toxic. The SR 200 Airline is made of materials that are not liable to give rise to sparking when subjected to friction, which enables the device to be used in an explosive or fire-hazardous environment. Control valve, flow meter and warning whistle for temporary and continuous monitoring of the air flow are included.
Assisted fresh air system can be used by 2 operators simultaneously. consisting of an adjustable harness with attachment for the breathing hose (max 20m for 2 operators and 50m for 1 operator) on the shoulder. Easy in use. Comes in a handy box. Mask (1023883) sold separately.
To be installed on Sundström filter system.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-300.
Charger for batterie of motorunit Proflow SC and EX.
Connection piece for S-series air caps. Connection piece for attachment on back of cap which makes that the air tube can be attached to the cap. Also needs a sealing ring to attach.
Sealing ring for S-series air caps which permits to attach the connection on the hood.
Hose of lightweight PU that connects between Jupiter or Versaflo motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S- series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo orJupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length. Length: 735 mm.
Replacement spare part, for use if the original air duct becomes worn out or dammaged during use.
Buttons for the frame of the screen as spare spart of M-series hoods. 10pc
AB2P3 screw filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65°C, inorganic gases and vapours, toxic dust, mist and smoke particles. To be combined with half or full mask with standard thread. Class 2 filter: up to max concentration of 0.5 %. Weight: 345 gr.
Welding helmet G5-03 PRO AIR in durable, lightweight material. To be combined with Adflo motor unit or V-500 regulator. Supplied without cartridge.
Anti-fog inner protection plate (visor) for welding hoods 9100XX, G5-01 and G5-03. (pak of 5 pieces).
Full-face mask specially designed for the Cleanspace CST system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Compact filter to protect against suspended particles (dusts, mists and fumes), organic gases or vapours with a boiling point >65°C. Can be clicked directly into the motor units Cleanspace CST PRO and Ultra.
Pac de 10 peel-off visors for Cleanspace masks.
This ready-to-use kit includes a PF-602E-ASB powered breathing system, FF-602 full face mask, 2 x particulate filter PFR 10 P3 DT-1235E, SS-6600 pre-filters with holder, SC-BT-56-ASB breathing hose, PF-653 filter port caps, PF-972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatibler with 3M filters DT series.
Lightweight drawstring bag designed for convenience. Featuring two drawstrings attached to the bottom corners, it can be comfortably carried over the shoulder or as a backpack.
Combination of safety helmet G3001, air duct S-960 to be attached to the helmet and chemical resistant hood with shoulder cover S-805E. Can be combined with Versaflo air hose and Versaflo motor units, or V-500E for working on compressed air. This combination is extremely suitable when respiratory protection needs to be combined with a safety helmet.
Compensation per trainer who comes on-site for a 3M training.
Fold Mask P3 for toxic dust. Comfortable three-piece folding mask with soft edges to increase comfort. With non-adjustable elastic headbands. Exhalation exhalation and lowers low C02 and humidity in the mask. Masks are packaged separately. NPF: 50.
Carrying harness consisting of two shoulder straps and one hip belt to comfortably carry SSR30/100 B on the body in both the unopene d and opened position.
Changeover valve or automatic changeover valve for work that requires use of compressed air for breathing and where an interruption of the air supply could be life threatening. Changeover valve with one connection for air hose from compressed air line and one conn ection for air hose from compressed air apparatus. Primary source is the compressed air line and secondary source is the compressed air apparatus that functions as a backup if the supply from the air line is cut off. When the device is switched from the primary to the secondary source, a whistle sounds. For use with BD Mini, DB 96 and Airmaxx compressed air systems.
T-Airvisor® Combi with safety helmet (EN 397), CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose (1035014) not included.For grinding/paintsprayin. Combined with T-airline regulator kit. To be used with motor unit.
T-Airvisor® with CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose. For grinding/paintspraying. Combined with T-airline regulator kit (661368). To be used with compressed air systems. NPF 500.In line with En 14594:2005 class 3B
HD/PE barrier film laminate hood with exhalation valve, PETG visor, air duct and adjustable head harnes. Unique flow indicator. PE breating hose. For high hazard applications combined wit T-airline regulator kit. To be used with compressed air systems.NPF 2000.
Escape hood filled with breathing air and a constant airflow activated by opening the carrying case. Quick and efficient to use for a maximum escape time of 15 minutes. Suitable for environments where oxygen deficiency may occur.
Cleanspace combined filter A1P3. Suitable for protection against airborne particulate (dust, mists and fumes), organic gases or vapours (boiling point >65°C). Weight: 220g. In line with EN12942
