BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Hygiene set for hearing protector VERISHIELD VS120D/VS130DH
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Softshell Modaflame MV73: Inherently flame retardant; Protects against radiant and convection heat; zip pockets; Adjustable drawstring in the hem; adjustable cuffs; 3 storage pockets; radio loops; Flame Retardant Reflective Striping wind resistant; Quality: Modaflame Softshell: 100% Polyester 95gr. laminated to a flame retardant TPU membrane 35grams composed with an inherently flame retardant Fleece 60% modacrylic, 39% cotton and 1% carbon fiber 220gr, total fabric weight 350grams 350g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1 B1 C2, EN ISO 11611 Class 2 A1, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 APC 2, IEC 61482-2 IEC 61482-1-1 ELIM 11 CAL/CM² and EN 13034 Type PB (6).
Welding trousers Bizflame FR401: Innovative stretch panels; Adjustable hem for all leg lengths; 100% Metal Free; Flame retardant striping; knee pockets, 8 storage bags, UPF 40+ fabric blocks 98% of UV radiation. Quality: Bizflame Plus: 99% Cotton, 1% Carbon Fiber 210g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 9 CAL/CM².
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
- For tools with max weight of 2,3 kg - With 2 carabiners - Line stays staut when reaching, retracts when not in use - With swivel housing connection
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
3M ™ Secure Fit ™ 3700 with amber PC lens and adjustable temples. Pressure Diffusion Temple technology (PDT) helps distribute pressure over the ears for a secure and comfortable fit. The Scotchgard ™ Anti-Fog Coating prevents the glasses from fogging for longer than usual anti-fog coatings and also contains an anti-scratch coating. Lens marking: 2C-1.2 1 FT KN.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Flexible and comfortable butyl rubber glove with rough finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals. Gastight and latex free. Lenght: 35cm, Thickness: 0.7 mm. Sizes: 7-11.
The 3M™ Peltor™ WS LiteCom Pro III ATEX helmet earmuff is a high-performance hearing protector with a built-in communication radio f or cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Replacement plugs for 3M™ PELTOR™ TEP, LEP en EEP. Attenuation: 23dB. Not separately tested as PPE.
Holster to fit virtually any hand-held radio, mobile phone and many other devices. With clip2loop coil tether and micro D-ring. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
The rain protector covers the sensors of the multigas monitor from rain and large debris. No PPE
The metal cage protects the multigas monitor against damage. No PPE
The large headrest is a replaceable part that only replaces the headgear headrest when the original part becomes worn or damaged during use.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Flame retardant soft sports bra. Spacious, adjustable shoulder straps for maximum support. Quality: Cantex JL, 240 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 14116 index 3, EN 1149-5.
Multinorm bib and brace Viana: Front fly with zipper; chest pocket with zip closure; 2 patched slanted pockets; 1 back pocket; 1 patched thigh pocket; 1 ruler pocket; 2 side slits; Knee pockets; 2 elasticated adjustable braces; Bib in front and back; Closure by 2 hidden buttons at the sides. Available sizes: 44-64R. Available colour: Hi vis orange/navy.
Flame retardant and anti-static t-shirt FR33: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Attachment set for headband suitable for Speedglas 100 welding helmet. Not separately approved as PPE.
Rapid rescue device at height; made of aluminum alloy and high-strength steel with 9.6mm diameter semi-static kernmantel rope, assembled with the device. Rope ends with double 8 knots for connection with carabiners which are included. Controlled descent speed: 0.8m/sec for maximum weight of 150kg.
Belt in brown leather. Adjustable to max 115cm.
The 3M™ Premium 4-Point Chin Strap X5-S4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a synthetic buckle. No PPE.
The 3M™ Short Visor X5-SV01-CE is molded from polycarbonate and features a scratch-resistant anti-fog coating. The visor is designed to fit 3M™ SecureFit™ X5000 and X5500 Series safety helmets.
Face shield in clear polycarbonate, length 175 mm. For use on EVO safety helmets. Marking: 1 B 3 9.
Chin piece S91C, suitable for attachment to face shield Surefit 175mm PC (1055809) and CA (1055811).
Green, latex-free disposable glove in Neoprene, suitable for use with touch screens.
- Parka - 2 sidepockets - 2 chestpockets with flap and zipper - 2 gasdetectionloops for positioning of antennas, kabels and detectors - Napoleonpocket - Mobile phone pocket - Cuffs adjustable by Velcro - Concealed zip with double storm flap with press-studs - Double innerpocket - Hood in collar with Elasticized draw cord - Inside EN 14116 index 3; Outside EN 14116 index 1 - Possible to add lining or 0434466ON Metz, to be ordered separetly Quality: 260 g/m² 99% polyester/1% anti-static/Lining 100% cotton Available sizes: fluo orange/navy, fluo yellow/navy (S-5XL), navy (S-4XL) Available colours: fluo orange/navy, fluo yellow/navy, navy Complies with: EN 13034-6 /6, EN 1149 /5, EN ISO 14116, EN 343
Complete motor unit kit consisting of SR500 motor unit, SR570 (bump) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Aluminum splint consisting of a roll of padded aluminum that can be folded into various shapes and adapted to the body part to be im mobilized. Can be used for arms and legs but also as an alternative to a neck collar. Is X-ray permeable. Dimensions: 11x91 cm.
6-point textile suspension with ratchet for safety helmet Pheos Alpine.
Hood – CTL713CM • Covers shoulders • One size • Ties to customize fit Case Pack: 100 Available sizes: one size For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
For secupro 625 (1032598)
The Softshell Luxe Rewear is a comfortable jacket with stretch, which is also water-repellent and windproof. This circular softshell is made of 100% recycled polyester and is part of the Rewear collection: a fully sustainable and circular clothing package. MATERIAL 100% recycled polyester Plain Weave 340 g/m² Available sizes: XS - 5XL Available colours: black - navy - ink - dark grey
Device for practicing the use of the self-rescuer M20.2 with hood. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Spare mouthpieces sold seperately.
The Sweater Rewear is part of the Rewear package: a fully sustainable and circular clothing package. This sweater is made of 60% organic cotton and 40% recycled polyester. Available sizes: XS-5XL Available colors: black, navy, ink, dark gray
Antistatic and heat resistant compressed air hose with a diameter of 9.5/19mm made of polyester reinforced with EPDM, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
The Sundström SR 200 Airline is a breathing apparatus that is supplied with a continuous flow of air and is designed for connection to a compressed air supply. The unique feature of the SR 200 Airline is the scope it provides for filter back up. The breathing hose can be released from both the facepiece and the control valve. The equipment can then be used as a filtering device. The SR 200 Airline can be used as an alternative to filtering devices in all situations in which the latter are recommended. This applies especially if the user is doing hard or sustained work, and if the pollutants have poor warning properties or are particularly toxic. The SR 200 Airline is made of materials that are not liable to give rise to sparking when subjected to friction, which enables the device to be used in an explosive or fire-hazardous environment. Control valve, flow meter and warning whistle for temporary and continuous monitoring of the air flow are included.
Stand-up collar with wide one-piece closure, Additional internal thermal reinforcements on the shoulders, External Kevlar® reinforcements on the shoulders, External reinforcements on the elbows, YKK anti-panic zipper with waterproof flap and velcro closure, Pre-shaped sleeves with insert, Rounded back for better protection, Several inspection openings with pockets: − Radio pocket and lamp holder − Napoleon pocket − Two outer pockets with integrated D-rings for attaching gloves, Knitted aramid cuffs, Various microphone clips Over 32 sizes are available, each size is available in seven lengths. Any size modification is possible. Color available: sand Compliant: EN 469:2020 X2 Y2 Z2, EN 1149-5:2018, EN 343:2019 4-4
To be installed on Sundström filter system.
Movable base with 4 wheels for davit arm RJ200.
Extensive protection against UV light, sparks and splashes for the crown of the head, throat/neck and/or ears during heavy welding or grinding applications.
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Impact protection for BW Ultra display, clicks onto the device.
Automatic welding helmet from the G5-03 Pro series in durable, lightweight material. Robust, compact design. Ergonomic, adjustable head harness. Supplied without cassette.
Versatile belt with quick release buckle for attaching a throw line and SUP line, including MOLLE strap for pouches and accessories. Can be easily adjusted for people of all sizes. The throw line is mounted on the red quick release loop, and is held tight around the waist to allow quick positioning for rescue.
The Zoll AED Plus is a semi-automatic device that is monolingual.
Shorts in contemporary design. Made of a lightweight and durable material with mechanical stretch.
Workwear shorts for women with large 4-way stretch panels at back and at selected points to optimize flexibility. Made of a lightweight durable material which is water repellent and quick drying.
Sustainable high-vis craftsman stretch trousers for women. Made of 4-way stretch from bio-based and recycled materials and equipped with stretch panels at the waist for outstanding comfort. Reinforced in exposed areas for extra durability.
White-yellow replacement rope of 2m for positioning line Grillon.
Fire-resistant battery storage/loading cabinet VDMA certified: smoke and temperature detector, 2 shelves, alarm (audio and LED), connection for return air, forced ventilation, 1 loading strip with sockets, 1 door with lock, connection to fire control centre possible, optional aerosol extinguishing system (1064626- this system needs to be ordered together with the cabinet). External dimensions of the cabinet (L x W x H): 584 x 760 x 1126 mm Internal dimensions (L x W x H): 500 x 680 x 760 mm Transport cost included - when ordering, please state CLEARLY whether a forklift is available.
Fire resistant locker cabinet: 12 lockers with combination lock, smoke and temperature detector, 2 sockets per locker, active ventilation, audiovisual alarm, connection to fire control centre possible. Outside dimensions (L x W x H): 740 x 1042 x 1950 mm (2100 mm incl. removable alarm) Locker dimensions: 480 x 240 x 650 mm Transport costs included - when ordering, please state CLEARLY whether a forklift is available.
Throat protection made of Tecaweld, a mix of 75% cotton and 25% Kevlar fibres. Tecaweld is even more resistant to flames and molten metal and is also very flexible and durable. Tecaweld is more resistant to flames and molten metal and is also very flexible and dur able.
Black glasses cord, synthetic fibre, for all types of glasses. Very easy to attach.
Protective external antiscratch lense for 100 series.
Automatic welding filter in shade 8-12 for 100 series (compatible with 3M H751100).
