BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
Ergonomically styled Cutter for use with plastic sheeting and foamed material. For use by right- and lefthanders. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 437: with hold-down clip designed to prevent material build-up ahead of the blade edge and to keep fingertips SAFELY away! Push-cut model. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. OPTICUT No. 435: Same as No. 436, but with additional lateral protector. Replacement blades: 1014310
These No-Hole interrupter locks are extremely versatile and easy to install due to patented thumbscrew design. You do not need a scr ewdriver. Simply secure the lock firmly to the switch, pull the clamp over the thumb screw and lock to prevent the clamp from loosening. Removable fittings (included) extend the number of useful power interrupters. Suitable for padlock brackets with diameter up to 7 mm
Dressings cabinets in metal with 2 doors. Dimensions: 75x38x170cm.
Half ice-grip overshoe made of supple, stretchable rubber for simple attachment over safety shoes. The sturdy metal studs provide a firm, powerful grip and stability on snow and ice. Can be used in temperatures to -40°C.
Face shield in black steel mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet.
Ergonomic plastic and foam cutter. Suitable for right and left-handers. The Teflon-coated metal foot is very strong and even resistant to hard and thick foils (no wear and tear). Easier to change blades than COUPPY, SNITTY, and MOBILEX. GS tested for safety. OPTICUT No. 435: foot is the other way around, for pulling cutting motion. Includes lateral protection that supports the plastic spring when shielding the blade. Replacement blades: 1014310
Round hydrophilic gauze dabbers, consisting of two layers of gauze held together with an elastic band to retain the shape avoid the wound coming into contact with free fibres. The structure of the dabber ensures a maximum absorption of body fluids, as well as an optimum distribution of the antiseptic or medications. The round shape makes it easy to hold using the pincers and reduces the risk of the instrument coming into contact with the wound. Available in bulk.* Absorption of body fluids during surgery. Post-operative care of wounds in hospital or at home. Care of chronic wounds (Leg ulcers, bedsores,…).
A compact, lightweight and portable saturation meter. Measures oxygen saturation and heart rate. Histogram of the heart rate. For both adults and children. Easy to use: 1 button. Compact, light and portable. Turns itself off after 5 seconds if a finger has not been inserted.
D-ring combination concrete, sturdy design for heavy conditions. Safe 'hook up' indicator lets the user see if it is properly installed. Install in holes of 18 or 19 mm. Only standard drilling required.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Mandatory sign - Ear defenders mandatory in self-adhesive polyester. Dimensions diameter: 50mm. Not PPE.
Light hat in 100% polyester (125g/m²) with 5 panels. Preformed panel in recycled PU, adjustable size by velcro, removable label, can be used for embroidery and/or transfer print. Available size: uni. available colours: navy, pink.
Earplugs with cord, made from a slow expanding, PU foam material. •An Ear Plug that gives evenly distributed pressure and a good seal with optimum comfort.
Sporty safety glasses with black frame in nylon and grey lens. With anti-scratch and antifog coating. Offers an excellent panoramic field of view for a better frontale and peripheric view during work. Soft nosepads and soft ear temples which prevent pressure points and sliding off the nose. Does not contain metal components.
Compress, suitable for dressing a leg wound. Dimensions: 12X14CM.
Tool kit cord designed for use with medium to large hand tools of max 15.9kg. Length un-tensioned: 78.7 cm, length tensioned: 132.1 cm. Not PPE.
Flame retardant and antistatic poloshirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). Press-stud closure, long sleeves, stitched seams, very soft and moisture regulating properties. Available sizes: S-3XL. Available colours: navy, grey.
Diphoterine® wall station, frost free. Contents: Eyewash bottles: 2x500ml, aerosol mini DAP: 200ml, Afterwash II®: 200ml, DAP 5l.- D imensions: H: 725mm, L: 380mm, D: 300mm .
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
First Aid Note Handy booklet with instructions for the administration of the first aid
Anti static rubber 20m hoses offering outstanding aging qualities and longservice life. Resistance to sparks and scorching.CEJN safety couplings that are quickand easy to connect yet prevent accidental disconnection. In line whith: EN14593, EN14594
Core jacket rope of 30 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Plastic ABE2P3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and particulates.
High ranger shoe in nubuck leather, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, abrasion resistant liner in textile and leather. Outsole in Nitril, SRA antislip, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 36-47.
StokoDerm Silicone Free Hand Cream for protecting and conditioning skin combat occupational skin disease, the second largest nonfatal occupational illness. StokoDerm® is ideal where both oil and water hazards are present. It contains the skin protective against, Eucoriol® for rough, dry hands. Content: 100ml. Old name: Stokoderm Grip Pure 100ml
Innovative self-closure system that traps objects inside, the pouch makes it nearly impossible for objects to fall out once placed in the bag. Easy to retrieve objects since no opening or closing is necessary.• Compatible with most tool belts. No PPE
Lightweight safety glasses in polycarbonate with Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, Scotchgard anti-fog coating, a large field of view and brings resistance to UV-rays.
Duo spherical lens glasses with modern fashion-look and extra eyebrow protection. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Clear polycarbonate lens with mirror lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision HC-AD coating: extreme scratch resistant on the outside, whilst antifog on the inside. Frame: black/grey.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has Kemblok and neoprene gloves attached to the sleeves with a 'locking cuff' . The suit is designed to be worn over the compressed air equipment. With pass-through and CEJN couplings to be able to connect to external air source. Available in: yellow. Sizes: S - XXL.
Pull with zipper 7234: Unisex Midlayer Full-length zip pull Thumb loops Warm through loops on the inside (Ullfrotté 400gr) Mix of merino wool and synthetic fibers (does not smell and is extra strong) Anti-bacterial Fast drying Washable at 60 °. Available sizes: XXS-3XL. Available colors: Blue, Black, Gray, Green.
Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.
Aquafloat Suit: - Fully waterproof outer fabric + taped seams - Anti-flushing straps to arms and legs with easy grip pull tabs + retro-reflective tape. - Front zip closure under double stormflap with touch <(>&<)> close fastening - 2 patch chest pockets with water repellent flaps + marine grade whistle - 1 Napoleon pocket under storm flap - 2 lower hip pockets with fleece handwarmer - Zip closure + gusset at leg for ease of donning over boots - Adjustable waist belt and elasticated back waist - SOLAS approved retro-reflective tape on hood, chest and shoulders. - Inner adjustable neoprene wrist seals Available Sizes: S-3XL Available Color: Black/red.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 500°C for 15 sec.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch coating. Marking: 2C-1.2 1 FT K.
Sweater with stand-up collar and zipper: Mid front closing with short zipper; Coding flap; full sleeve hem with elastic; stocking hem; 2 horizontal reflective bands on the front, back and sleeves. Available colors: fluorescent yellow / navy and fluorescent orange / navy. Available sizes: XS-4XL. Compliant with: EN ISO 20471 Class 2.
The Merton rain jacket with fixed hood, two inset pockets and sleeve narrowing by press studs is made from a very supple but highly protective fabric. This flame retardant and anti-static jacket protects you from water penetrating but remains breathable at the same time making this jacket very comfortable to wear. Quality: 100% FR Polyester knitting with FR PU coating + AST; ± 240 g/m². Available sizes: S-3XL. Available colors: Navy.
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
Hoodie Hi-Vis with full zip: • softshell reinforcements on the front • slim fit for maximum freedom of movement • side pockets with zip • large mesh inner pockets • extra windstopper in the cuff with thumb grip • sealed and segmented reflection bands. Quality: 70% Cotton, 25% Polyester, 5% Spandex. Available sizes: XS-4XL. Available colors: Black / fluo yellow. Conforms to: EN ISO 20471 class 1.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Light disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Again, the safety technique of retractable knife is applied. The knife fits in any pocket. Weight: 17g, cutting depth: 12mm. No PPE.
Low shoe S1P in textile with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14). PCF (Product Carbon Footprint) = 8,53kg CO².
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Helmet hat Solid from the brand BUFF. High breathability. Moisture regulation and bacterial treatment. Available sizes: S/M and L/XL. Available colours: Fluo yellow and black.
- Skin conditioning cream - Non greasy, light formula - Shea butter, alantoin and glycerin for hydratation and care - Perfum free and dye free - Glove compatible - Silicone free - Non-tainting and HACCP assesed formula
Hi-vis sweatshirt PW370: Knitted cloth with brushed back; HiVisTex Pro reflective striping; Ezee Zip; multi pocket; Rib collar and cuff; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 100% Polyester, 280g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S–5XL. Complies with: EN ISO 20471 class 2.
Cederroth compresses for very fast, first treatment of burns, 10 x 10 cm.
Helmet hearing protector Sana 34 for safety helmet CENTURION.
Modern, fitted ladies' t-shirt with reinforced shoulder seams and double-stitched neckline. Elastane in board. Ribbed neck in four layers. Oeko-Tex 100 certified. Quality: 100% cotton. Available sizes: XS-2XL.
Hi-vis trousers 6531: • trousers in easycare material; • nail pockets; • two back pockets with flap and velcro closure; • ruler pocket and knife button; • adjustable knee pockets; • extra reinforcement on the nail pockets, ruler pocket and knee pockets. Quality: 80% polyester, 20% cotton 245 g/m².
Beacon to determine the location data of lone workers, wearing an emerit device, in distress at indoor locations where GPS does not work.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate CBR23 lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision extreme coating. Frame: black/white.
TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
TYVEK® IsoClean® IC703 Chemo-Gown Ideal for handling cytostatics and various laboratory activities. Increased skirt length for improved protection against frontal exposure. Openness in the back closure for increased ergonomics of the wearer - the hazard and uncomfortable feeling of slipping is avoided while sitting in front of the bench! Available sizes: XS* - 3XL (* XS = made to order, terms <(>&<)> conditions apply) For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Tyvek® IsoClean® IC 458B WS Boot cover Bound seams. Covered elasticated leg opening. Ankle ties. Slip-retardant Gripper™ sole. White. Available sizes: S - XL S fits up to EU 37 M fits up to EU 39,5 L fits up to EU 48,5 XL fits up to EU 53 For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Comfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools.
Pouch to attach to belt 1057147.
Quick Instant Cold Pack 14x18 cm, for single use.
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
