BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
I-beam trolley for I-beams ranging from 76 to 203 mm. Maximum thickness of I-beam: 17 mm. Easily follows the movements of the anchor ed person. Can be used in combination with a safety line or fall-protection block.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Rebel fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use. Can be maintained.
Temporary horizontal lifeline in galvanised steel with a maximum length of 18 meters. Lifeline using line tension can be stretched between two points. Equipped with a snap hook to the hard plastic case and a carabiner on the end of the cable to be attached to various structures with anchor points. Housing provides a sturdy zinc handle with the carabiner attached to it. Weight: 11.25kg. Lifeline Thickness: 6.25mm. Strength: 24.5Kn. Serves 2 persons.
D-ring combination concrete, sturdy design for heavy conditions. Safe 'hook up' indicator lets the user see if it is properly installed. Install in holes of 18 or 19 mm. Only standard drilling required.
Tool cord 30.48 cm with carrying capacity up to max. 4.5kg. There are trigger hooks on both sides of the line, these rotate around a spindle so that the rope cannot become tangled. Pack of 10 items. Not PPE.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
Tool kit cord designed for use with medium to large hand tools of max 15.9kg. Length un-tensioned: 78.7 cm, length tensioned: 132.1 cm. Not PPE.
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
Shoulder and back padding for XE50 fall harnesses. Protects the shoulder straps and offers more comfort when wearing the harness.
Safety line 1.5 metre made of kernmantle rope with integrated shock-absorber Serves as connection between anchor point and harness.
Set of 25 quick rings with diameter of 3,8cm for tools with maximum weight of 0,9kg and that have pre-drilled holesin them. No PPE.
Comfort tool belt. Extra padding for comfort. Modular design for flexible carrying options. For safe storage of tools while working at height. Size: L/XL (36-44cm) Not PPE.
Long reacht davit arm with a range of 70cm to 113cm high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
Adapter for mounting sealed block on davit arm.
Belt lanyard with karabiner.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 5m. Anchor point for protection of one person.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
Harness with two attachment points: on the back and on the chest and quick release buckles. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 2:1 that makes retrieval and descent lighter. Total rope length should be divided by 2 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp which must be operated by a second person, not for self-descent. Max descent capacity: 200 kg, max raising capacity: 100kg. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod.
To create attachment point on tools. For material lighter than 0.9kg. Always use with Python Safety Quick wrap tape. Not PPE.
The 3M™ DBI-SALA® Utility Pouch is constructed from heavy-duty 22 oz. duck canvas and features two side ears that are designed to hold spud wrenches and sleever bars. Two inner pockets are included in the pouch for additional tools. Tools can be tethered to two D-rings on the front of the pouch, or to an additional D-ring inside the pouch.
Sling sleeve anchorage system for temporary anchoring around a rigid support. Diameter:6 mm , lenght: 2m. In Line with EN795
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted.
Lanyard, 1,5 meter length, consisting of elastic strap with integrated shock absorber and fall indicator. Fitted with 1 standard carabiner and 1 carabiner large opening.
Manual winch to facilitate casualty retrieval. Can only be combined with the Rollgliss R350 with rope control device and the AM100 tripod. Weight: 4 kg.
Kernmantle rope Rollgliss 9MM
Very robust fall-stop device: 10 metre galvanised steel cable, with integrated shock absorber and descent brake. Casing made of coated aluminium. Immediately stops any vertical fall. Serves as connection between anchor point and harness. Equipped with carabiner hook. After a fall, the brake ensures the person descends at a constant speed automatically. This mechanism can be activated in advance or remotely (provided a rescue rod is used). Only for vertical use. Weight: 8.5 kg. Maintainable.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Adjustable wrist band with velcro.
Unique sleeve design conforms to the size of virtually any drill battery.Sleeve is cinched to the drill, allowing the drill to be tethered off while being used at height.
1/2 day training anti-fall protection by 3M (Capital Safety) at the training center of 3M.
Set consisting of 1-point harness (size M/L), Nano-lok 2G fall arrestor of 2M with scaffold hook (1034477) and backpack (1032246) with product overview card. Max user weight: 140kg.
Adapter for mounting the winch advanced on DBI-Sala davit masts. (Already mounted on davit lower mast 1058465 and the 5 piece davit systems 1045211 and 1045256)
Very comfortable positioning harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Positioning belt with pass-through buckle and padding.
Double elastic lanyard with scaffold hooks, tested for a maximum user weight of 130 kg.
Window & door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2 (horizontal).
TOOL CINCH ATTACHMENT with two wings - 15.9 kg maximum carrying capacity
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
Constructed from a heavy-duty canvas with an inner lining to prevent punctures, with multiple inner pockets and integrated D-ring makes tehtering tools easy. Magnetic closure system. Dimensions: 22,2cm x 30cm. No PPE
1/2 day on-site training fall protection by 3M. Content and location according to your needs.
Mobile anchor point in 25mm wide polyester webbing, tested for sharp edges. Anchor point for security of 3 persons or maximum 300kg. Breaking strenght: 22kN
Very robust fall-prevention device with winch, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on davit arm via adapter. For 1 person, max. 150 kg. Weight: 15 kg.
Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.
all arrest block Rebel 30 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13,4kg.
Adaptable to most walkie-talkies and phones. With D-ring. Can be attached to a belt or harness Not PPE.
Case in neoprene for roller meters. Fits most roller sizes. Provided with a clip to attach to a belt strap or holster. Ideal when working at height Not PPE.
183 cm tray for attaching tools with a maximum weight of 15.9 kg to avoid tools falling when working at height. Provided with a loop on one side and a carabiner with safety lock on the other side. Not PPE.
Python scaffold wrench holster (belt)with retractor and ext-H2LBungee.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use.
Anchor lance, synthetic material, extendible from 1.8 to max. 7.8 metres. Forms an anchor point in combination with carabiners with AP168 cord. Ideal for attachment of a temporary vertical safety line for safe vertical movement. Temporary vertical life-line with line clamp, can be attached to eye of carabiners. Anchor lance cannot be removed until protection is no longer required. Weight: 2.5 kg.
