BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Convenient plastic holder for Diphoterine Micro Dap.
Handy plastic holder for 50ml Diphoterine Lis.
Set of 4 cooling packs with a constant temperature of 21 °C. These 100% biobased INUTEQ‑PAC® PCM packs perform reliably under any extreme temperature and at any humidity level. For the Bodycool Pro cooling vest (1052092).
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap and grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Apron with bib, made entirely of CUTEX® (cut-level 5), color: gray melange. High-Tec Performance Cutex® for maximum safety: • Optimal protection at the workplace • Cut resistance: EN 388 Section 6.2: Cut level 5 • Cut resistance: EN 388 ISO 13997: D • Heat and flame protection: EN ISO 11612: 2008 Code A1 / B1 / C1 • Antibacterial and sweat-absorbing • Pleasant freedom of movement due to special knit construction • Flexible, stretchy and lightweight fabric for a long lasting well-being and wear comfort. Quality: CUTEX® (cut-level 5) Available sizes: Universal Available Colors: Gray melange
Comfortable fleece jacket with standing collar is provided with two inset pockets with zippers, elastics in the sleeve ends and an elastic cord in the hem. This fleece jacket has been treated against pilling and can be zipped into other coats. Available sizes: XS-3XL. Available colours: Navy.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 500°C for 15 sec.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
The Twill Cordura coverall provides extra comfort and freedom of movement thanks to the fabric with stretch material and the pleats in the back. The overall offers many storage options due to the various pockets. The reflection print on the thigh pockets, the chest pockets and the back of the trouser legs provides extra visibility. The pants' removable hem offers 6 cm extra length. Quality: 65% Polyester / 35% Cotton, 280 g / m². Available colors: Navy, black and dark gray. Available sizes: 42-66 NL.
Robust belt clip for Twig One and Twig One Atex rotates 90 ° so that the device can be worn both vertically and horizontally. The belt clip is securely attached to the device with screws, glue and a bracket.
The BHV first aid kit large Luxe is a very extensive first aid kit (including wall holder). The shelf life of the products is on average 4 years. In the BHV First aid kit large Luxe, a color guide can be found that identifies various injuries. This first aid kit contains a basis for the most common first aid procedures. Size: 32 cm x 22 cm x 13 cm. The refill is available separately as 1050702.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK2P3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists.
Perforated safety sandal in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Super-light safety helmet with short peak, made of strong polypropylene. Vented. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
6-point suspension in textile with wheel ratchet and sweatband for helmets EVO-range. No PPE.
DuPont™ Tyvek® 400 Dual TG. Overall with hood. Tyvek® on the front and large breathable SMS on the back. Stitched seams also taped on the upper body: armpits and wrists where Tyvek® liner gloves are attached. Attached Tyvek® socks. Elastic hood. Elastic waist (stitched in). Tyvek® zipper and flap. Chin flap with adhesive tape. NOT individually wrapped, 25 pieces in one box. Conforms to: EN 1073-2, EN 1149-5, Type 5/6 Available sizes: S - 3XL Available color: white *MADE TO ORDER*
Fall-stop device with 3.4 metre strap with integrated shock absorber and 2 self-locking steel hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Comfortable goggles with wide field of vision, PVC frames. Fits perfectly over prescription glasses. Adjustable headband, ventilation system. Model with removable film. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation of up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean.
Cellulose acetate shield, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Packaged per 10 pieces. Marking: EN 166 1 F 9 3.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Life buoy approved by Netherlands Shipping Inspectorate, outer diameter 75 cm, inner diameter 45 cm, diameter: 11 cm. Material: polystyrene with steel reinforcement and oil and petrol resistant nylon cover. Characteristics: with grab loops, 30 metre life line. Weight: 4.5 kg. Applications:
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Peltor Earmuffs to be used with the Speedglas 9100. These ear muffs provide moderate level of attenuation that meets the needs of most welding industry applications. Liquid sealing rings for improved comfort. Easy to replace cushions and inserts helps keep them hygienically clean. Large space inside cup helps reduce moisture and heat build-up. SNR: 24dB.
Mains power socket plug with USB charging port. Power adaptor 230v DC to USB 5V, for use with PELTOR™ ACK053 rechargeable battery pack. Compatible USB Charging Cable PELTOR™ AL2AI or PELTOR™ FR09 required. No PPE.
Set with Skipper unit with red/white barrier tape of 9m, including wall bracket and receiver.
Outer protective visor for the 3M ™ Speedglas ™ Automatic Welding Mask G5-02 to protect the Auto Blackout Filter from sparks, splashes and scratches.
Pictogram with 'AED' inscription to be mounted on the wall in Forex (PVC). Dimensions: 15 x 15cm.
Head protection, small, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Motor unit that is worn on the back of the head, for connection with a half or full face mask. Max. air flow: 230l/min. Weight: 450g. Internal battery charging time <(><<)> 2h (up to 95%). Up to 2 hours of deployment time possible. Contents: motor unit, battery, battery charger, carrying case, 2x neck support, quickstart user guide, cleanspace smart app. Filters and mask need to be ordered separately.
The 3M™ PELTOR™ ComTac™ VIII Headset helps protect your hearing and improve auditory environmental awareness and communication in ch allenging conditions. The ambient listening function, also known as 'talk-through', is a way of electronically passing safe audio sounds past the individual hearing protection while protecting your hearing from harmful sounds. A microphone receives sounds outside the headset and sends them to a speaker in the headset. The level-dependent digital audio circuit detects sound levels above the desired threshold and compresses them to a safe decibel level or amplifies weak sounds to an audible level. The ComTac™ VIII features our latest ambient microphones placed in a wider and deeper parabolic design. The MAP feature provides advanced ambient awareness modes that give access to a variety of gain settings, but with frequency shaping, to improve aural performance in five conditions. The MAP profiles are designed for a variety of combat and combat support operations. ComTac™ VIII features soundscape to enhance speech intelligibility in noise. Soundscape can automatically change product settings depending on the user environment. External communication and ambient listening functions are independent with respect to the Rx/Tx failsafe design. In the event of electronic failure or a flat battery, communication with external devices continues to function.
CPR Uni-padzTM Universal III (adult/pediatric) electrodes supplied with rescue accessory kit. Suitable for the Zoll AED 3 semi-automatic (1060428) or the Zoll AED 3 fully automatic (1060429).
The Euro Pearl Soap is a lightly perfumed hand soap for daily use in sanitary areas. Dispenser: 1003959
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low and high alarm :4ppm
Low shoe in breathable sandwich-mesh made of strong microfibres, fibreglass toecap and flexible FAP® anti-perforation. Fitted with a Breath Active lining.Rubber outsole URBAN with idCell and rotation point, resistant to 300°C contact heat. Sizes: 36-47.
Disposable glove in nitrile materia, blackl. Powderfree. Palm and back with full-surface, non-slip fish scale structure. Firm grip in wet conditions, oil and grease. 24cm, 0.14mm thickness. Food safe. Sizes: S-XL. Conforms to: EN374-1:2016: Type B GKLMT; EN374-5:2016
Inherently flame-retardant Multinorm work jacket, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
Static dissipative glove: exceptional protection against electrostatic discharge. Proprietary nitrile formulation: ensures low vertical resistance below 10⁸ Ω. TNT™ Chemical Splash Resistance Technology: enhanced chemical protection. Touchscreen compatible. Food approved. Length: 24 cm Thickness: 0.16 mm Sizes: S – XXL Compliant with: EN 16350, EN 374: JKPT – VIRUS
Double Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Double Lanyard to allow continuous pro tection, even when switching between two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate openin g. Serves as connection between anchor point and harness.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Kiss-of-life breathing mask with one-way valve for resuscitation and first aid. The mask serves as a hygienic cover over the victim' s face. Packaged in a handy, yellow key chain holder.
Spill kit in a UV resistant, sturdy package for one-time use. Ideal for small quantities of leaked liquid. Content: 15 pads (38 x 48 cm), 3 socks (7.6 x 122 cm), 1 pair of safety glasses, 1 pair of gloves and 1 disposal bag. Absorption capacity: 97 litres. Suitabl e for: general industrial use.
Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: flacon 100ml.
Enclosures for electrical plugs Extremely effective against unauthorised or negligent use of electrical equipment. Not PPE.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Knee protector, 100% polyethyleen, felt, height: 255mm, Width: 220mm.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
The MRO Plus towels are very effective for absorbing and removing oil and water-based fluids. MRO Plus is a top quality, padded fabric. Thick, strong and with great absorbency. Suitable for almost all industrial applications. The perforations allow you to use as much as you need. The grey colour conceals the dirt, so that it can be used for longer. Roll of cloths 76cmx46m double-perforated every 38cm.
Boot in green PU, durable and lightweight, with steel antiperforation sole and toecap. Liner in textile, inlay in micro cellular latex with felt layer. Outsole in PU, with good antislip resistance (SRC). Temperature resistant up to -40°C and +100°C, oil, fat and fertilizer. Good chemical resistance, better antislip profile, higher toecap and bigger fit.
Model wallmounted eye/face wash including a stainless steel 11" round bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include cast-aluminum chromate protected wall bracket, tailpiece and trap, universal sign, 1/2" inlet, and 1-1/2" waste.
Model mounted eye and face wash features the medically acclaimed AXION MSR eyewash and eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
Frame of the screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Orange safety cutter with dual hook lasts twice as long as single blade cutters Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
High shoe in full grain leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Laces are heat resistant. Has BIOMEX-PROTECTION- support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.
The Stability Plus insole (sizes D and XD) provides optimum support to the heel and middle foot. With mid-foot support for a dropped front foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. Excess heat is removed, preventing blistering.
100 long plasters measuring 18cmx2cm.
Inox replacement knifes for safety knife Martego. Dimensions: length: 26mm, width: 18,5mm, material thickness: 0,40mm. Package: per 10 pieces.
Gauze pads 100% cotton, surgically folded with turned-up fringed edging.
Rolled bandage, suitable for dressing a wound. Dimensions:10x12cm. Handy for larger wounds on a straight section of an arm or leg.
Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.
The 3M™ Goggle Gear, 500-Series is a low-profile design with an adjustable strap and indirect ventilation. These splash goggles with 3M™ Scotchgard™ Anti-Fog Coating help keep lenses clear in, steamy and wet environments.
Dispenser for 1L Deb-Stoko refill Deb Instant Foam Complete (1034361).
