BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
3M ™ Solus ™ 2000 with brown PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating (anti-scratch and anti-fog). Marking: 5-2.5 1 FT KN.
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 50%, Polyamide 45%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Low safety shoe in velours leather with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Jacket, stand-up collar, long sleeves, sleeves and collar made of CUTEX® (cut-level 5), front and back made of performing fiber 70400, thumb loop, full zip with zipper: High-Tec Performance Cutex® for maximum safety Optimal protection at the workplace Cut resistance: EN 388 Section 6.2: Cut level 5 Cut resistance: EN 388 ISO 13997: D Heat and flame protection: EN ISO 11612: 2008 Code A1 / B1 / C1 Antibacterial and sweat-absorbing Pleasant freedom of movement due to special knit construction Flexible, stretchy and lightweight fabric for a long lasting well-being and wear comfort. Available sizes: S-4XL. Available colours: Hi-vis yellow/orange.
Raincoat in heavy PU quality. Oil and cold resistant. Wind and waterproof. Suitable for food industry. • Fixed hood with elastic • Concealed zip with press stud fastening • Sleeves adjustable with press stud fastening • Washable at 95 degrees Quality: 50% polyester, 50% polyurethane, 240 g / m². Available sizes: XS-4XL. Available colors: blue and white. In accordance with: EN 343 3.1, EN 13034 and EN 1186.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray, Black / gray and gray / yellow. Conform: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1 D0 E0 F0, EN IEC 61482-2 class 1.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
Handle type: smart-retracting, Ergo Pull™ slider reduces strain, Compatible blades: 10526, 10528, Finger-friendly edge stays sharp 11x longer, Reduces injuries, lowers costs, Non-sparking, non-conductive blade, Includes 1 dbl-sided rounded-tip safety blade, Ambidextrous design, Chemically inert blade never rusts, No-tool blade change, Fewer blade changes = fewer injuries. No PPE.
95 impregnated wipes of 15x15cm, cleaning and disinfecting. Bactericidal and fungicidal. Disinfect after 5 seconds of contact time. The tissues do not dry out in the packaging. Use biocides safely. Always read the label and product information before use. BE-REG-01578
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
Hi-Vis T-Shirt with short sleeves and Cooldry yarns. This offers protection against the sun through a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Compliant with: EN 20-471 class 2.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Beannie Result: 100% knitted soft feel acrylic; short fashionable model; reversible; with contrasting color on the bottom edge and inside.
Anti-fog kit. Spray (30ml) + cloth. Suitable for all types of lenses (Except AR coated lenses).
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Washable at 60°C. Size: 53-64cm.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Boot in waterrepellant full grain leather, with an synthetic antiperforation sole and composite 200J toecap. Fitted with a breathabl e, abrasion resistant liner in 3D-textile. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Green boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Recirculation filter unit, suitable for all cabinet sizes of fire‑rated storage cabinets (S‑line, Q‑line, V‑line, UB‑line and XL‑line). Equipped with a colour display and signalling system to indicate filter saturation, operating status or fault messages. Fitted with a highly efficient broadband activated carbon filter, filtering and retaining 99.999% of hazardous substances from the processed air. Provides great flexibility in installation options: cabinet‑mounted, wall‑mounted or integrated into a housing. Supplied complete with a multi‑stage filtration system, secondary filter, connection cable and mains plug. ATEX compliant – CE EX II3/-G Ex ic nA IIB T4 Gc, ultra‑quiet operation: approx. 23 dB(A). Activated carbon filter 54‑1044 included, to be replaced annually.
High shoe in black full grain leather, with an aluminium 200J toecap and steel anti-perforation sole. Fitted with a breathable, abrasion resistant Cool comfort and Odor Control liner in polyester mesh. Outsole in PU/Nitrile (bio-based recycled rubber), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: W 38-48 / XW 38-48.
Knee protection for heavy work. The outer face reinforced with nylon provides protection against punctures. It resists cuts, tears a nd has a non-slip surface for better grip. One size fits all.
Replacement earplugs for Bilsom Percap 5720 banded earplugs.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
Jaune, comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Modern glasses, smaller then the standard Pheos range. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Replaceble spare part if the original filter cover is in need of replacement.
Adapter for attaching KASK earmuffs on Plasma helmets. No PPE.
A high-cut, triple-lined winter safety boot with highest protection for very cold environments. Specially treated leather with heat resistance para-aramid thread in the seams provides a max operating heat limit of 400°C/752°F for 30 minutes and resists weld spatter. "W" in the name indicates that the boot is certified for welding. The oil and heat-resistant nitrile outer sole gives excellent grip and JALAS® aluminium toe cap, plasma-treated textile puncture protection and double impact protection zones in PORON® XRD® mean safety with every step. EN ISO 20349-2:2017 S3, SRC, CI, HRO, HI, WG EN ISO 20345:2011 S3, SRC, CI, HRO, HI, WG
Stretch trousers for women with knee pockets from the Progression collection, enhanced visibility EN17353.
Complete disposable set, for very short work in an environment with asbestos, without direct relation to asbestos dust and without projection of asbestos (maintenance and repairs). It consists of an overall in size XL, a pair of PVC goggles, 1 FFP3 mask, and a pair of green nitrile gloves size 10, 1 waste bag with asbestos marking (90x110cm), a pair of disposable overboots and 1 roll of tape to stick gloves and overboots and thus prevent asbestos from penetrating the suit. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 295g.
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Harness is very easy to put on. Integrated fall indicator on the front and back, suspension trauma straps and padding on the waist belt.
Face shield (wire mesh shield) S59CEV for use with Centurion helmets (except for the Spartan). The shield includes three adapters: C for English connection slot, E for European 30 mm slot and V for Vision.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Post and cement base red/white, height 90cm. Chains and ribbons can be attached to control foot traffic.
Smoking prohibited. Prohibition sign in self-adhesive polyester. Diameter: 200mm.
Headband suitable for Speedglas 9100 welding helmet. Includes attachment set. Not separately approved as PPE.
Standard casing for hand wheel valves. Not PPE.
Light (340 g) safety helmet made of polyethylene with medium-length peak (neither short nor normal length). Quality and comfort are guaranteed due to the improved, permanently attached 6-point textile suspension with slide adjustment (51-63 cm), fitted with a highly absorbent sweatband, made of 2 mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi-slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter. Suitable for: general industrial applications. Helmet shell colours: white, blue, yellow, red, hi-viz yellow, orange, green, grey, black, hi-viz orange IN COMBINATION with silver, hi-viz yellow, hi-viz orange neck protection.
Brown, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Suitable for light or medium mechanical work and laboratory applications.
Fire resistant protection seal for breathing tubes BT. No PPE.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a liner in leather. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Poloshirt bicolor, 50% cotton/50% polyester, 180 gram/m² piqué. 1 left breast pocket, neck tape and 3-buttons closure. Straight model with side splittings. Very durable, color-and formretaining. Available sizes: XS-7XL. Available colours: Khaki/Black, White/Darkgrey, Grey/Black, Black/Grey, Darkgrey/Black, Black/Red, Black/Orange, Black/Lime, Navy/Red, Navy/Royalblue, Royalblue/Navy, Navy/Lime. Stockarticle in Darkgrey/Black sizes XS-L
Arm protector heat and cut resistant. Length 45 cm.
The uvex pheos alpine combines the various requirements of the industrial sector (in accordance with EN 397) and mountain climbing (in accordance with EN 12492) in one helmet with an unparalleled fit . Multifunctional helmet for working at heights and rescue operations. Combination of features from the industrial protection helmet (EN 397) with the requirements for a climbing helmet (EN 12492) .Safety helmet with slot on the front for helmet lights.Side Euroslot adapters (30 mm) for attaching earmuffs or the uvex pheos visor system . Options for attaching head torches, goggles and face protection . Meets standard EN 397 and additional requirement for very low temperatures (-30 °C) . Firmly riveted four-point chin strap for use in accordance with EN 12492. Chin strap included (art. no. 9790.005) for use in accordance with EN 397. Light ABS helmet shell offers high level of protection and durability. Comfort features : Six-point textile band attachment ensures optimal fit and great comfort.Suspension harness with wheel ratchet for variable width adjustment.
High shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 40-48.
The Talia signalisation raincoat was therefore especially designed for them. With ergomic sleeves, underarm ventilation, an elastic cord at the waist and an elastic wristband with narrowing by means of Velcro closure was thought to comfort. The practical side also thought about a removable hood with elastic cord that can be stored in a special bag on the inside, 2 stuffed things, 1 sleeve pocket and 1 inside pocket. Quality: Siopor® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g / m². Available sizes: XS-2XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 class 3: 3.
Hi-vis polo shirt with ARC protection: Lay flat collar; Closure with hidden buttons under flap; long sleeves; Welded segmented reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1 - EBT 7.4 cal/cm², EN ISO 11612 : 2008 / A1 B1 C1 F1, EN ISO 14116 : 2008, EN ISO 20471 : 2013 / Class 2 and EN 1149-5 : 2008.
Shirt with round neck, front and sleeves constructed with CUTEX®, back made of functional knitted fabric, increased protection of the forearms due to additional fencing fabric inside, Superfabric abrasion protection in the abdominal area and thumb hole. Available sizes: S-4XL. Available colour: yellow and black.
Being visible and staying warm, this is what the Sparrow offers you. This robust winter hi-vis jacket has a comfortable, warm, removable fur lining. The fur collar and sleeves, with knitted wind cuffs at the sleeve ends are removable. With an inner pocket and many outside pockets, including a phone pocket, pen pocket and a loop for a badge, you are never short on storage space. Quality: 80% polyester + 20% cotton; ± 280 g/m². Available colors: Hi-Viz orange and hi-viz yellow. Available sizes: XS–4XL.
T-shirt bicolor with slanting seam on the chest. Quality: 50% Combed cotton / 50% Polyester, 190 g / m². Available sizes: XS-8XL. Available colors: navy / royal blue, royal blue / navy, gray / red, black / red, black / orange, black / lime, black / yellow and black / gray.
4-points chinstrap for Pheos helmet. No PPE.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Classic two-tone Tricorp T-shirt from the Workwear line made of 100% cotton. The collar is finished with a qualitative 4-layer ribbed, which ensures a nice connection around the neck. Quality: 100% combed cotton, single jersey. Available colors: navy / royal blue, black / gray, black / red, black / orange, black / lime. Available sizes: XS - 7XL.
Hi-vis coverall Mornant with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo orange/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
High shoe in waterrepellent full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Low shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
