BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Industrial headlamp Vizion I,with non-slip rubber helmet strap.Safety Yellow, ATEX. 3 beam modes: spot,diffuse and red diffuse.The red diffuse mode makes night vision possible. The Vizion is O-ring sealed for a completely watertight guarantee. Designed for gloves. Effortlessly access the power button and beam selectors with even the thickest gloves. Lamp module can be removed from its casing for use as a portable work light.
Lanyard, 2 metre length, consisting of kernmantle rope of 11mm with integrated shock absorber. Fitted with one standard carabiner and a snap hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
Quick cleaning and disinfection of surfaces and equipment. Kills bacteria, mould and viruses in 1 minute. Non-corrosive. Also suitable for the disinfection of helmets, safety shoes and full-face masks.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
Excellent protection against hypothermia and solar radiation. This isothermal blanket reflects intense sunlight and retains body hea t, without sticking to open wounds. Effective shock prevention after a serious accident!
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore-Tex. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in leather. Specially designed BOA closing system. Sizes: 38- 48.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Black waders in PVC, fitted with a steel 200J toecap and steelantiperforation midsole. Outsole from PVC Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Waders in PVC, 100% waterproof. Sizes: 39-47.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
UV-resistant polyethylene chain to block off danger zones. Can be used in combination with marker poles. Weight: 2.7 kg per 25 m. Le ngth: 25 m. Colour: red/white.
Delineation tape in yellow/black with a length of 100M, with of 80mm.
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
New generation demand valve with quick-coupling for compressed air apparatus. Demand valve that responds to lung demand very quickly and comfortably and switches to overpressure automatically upon the first breath. Maintains a constant overpressure of 3.9 mbar in the full face mask to prevent inwards leakage. For use in combination with full face masks 3S-Maxx and Ultra Elite Maxx as well as with G1 Maxx.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 90 x 90 cm.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
Transport box for full mask, such as Shogun. Equipped with practical shoulder strap. Ideal for dust-free storage of full face mask and filter, when they are not connected together.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
Hood, 48.5% Meta-aramid, 48.5% viscose FR (lenzingFR), 3% belltron.fire retardant, long collar, oval face opening. Available color: blue. Sizes: 1 size.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 75 cm, reflective white band around diamete r, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective properties. Su itable for: general industrial applications.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
High shoe in hydrofugated textile, with a synthetic antiperforation sole and steel 200J toecap with TPU scuffcap. Fitted with a Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
configuratie op aanvraag/configuration sur demande
95 impregnated wipes of 15x15cm, cleaning and disinfecting. Bactericidal and fungicidal. Disinfect after 5 seconds of contact time. The tissues do not dry out in the packaging. Use biocides safely. Always read the label and product information before use. BE-REG-01578
Glove in butyl rubber, unlined, length 35 cm, thickness 0.78mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Compresses for very rapid first aid for burns in the acute burning phase. 20 x 20 cm. Three year shelf life.
Overboot in ultra chemical resistant and antistatic material (Hazmax). Outsole in vulcanized rubber, with a perfect slip resistance, oilresistant and heatresistant up to 300°C. Forseen with a heel part, excellent for climbing ladders. Fixing by rubber strap for a perfect fit, wide shaft for ease entry and fitting.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 30 cm, reflective white band around circumf erence, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective propertie s.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
Corresponding dispenser(s): 1054720 or 1060911.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Powerful rechargeable LED head and flashlight, with a maximum output of 2700 lumens, making them extremely suitable for use in industry. the lamp can also be used hands-free, by means of a metal pocket clip. There is also a built-in magnet on the back to secure them to a metal surface. The lamp can be rotated 180° to easily set the desired angle. Easy to operate, even with gloves. Comes with micro USB cable to charge the 21700 Li-Ion battery at 4000 mAh, battery holder, lamp holder, headband, spare O-ring, pocket clip and a lanyard. Can also be charged with 2 CR123A batteries.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Soap- and alkaline-free liquid for responsible cleaning of rubber masks, medical equipment, parts of compressed air equipment, prote ctive clothing, etc. Clean is a slightly viscous mixture of anionic surfactants, corrosion protectors, inhibitors, additives and fix atives, water and NaOH, with a pH value of 7. Completely biodegradable, non-flammable and does not irritate skin or mucous membranes . Use a 0.5-1% or 1%-3% solution, depending on the materials to be cleaned. For manual cleaning.
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.
Trafic Rescue Helmet; It can be esuipped with with hearing protection and clear visor. It can also be fitted with high performance XP-lamp and SCBA mask for rescue in toxic and dusty environments.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Suit with attached chemically resistant Kemblok gloves. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in PBI. Sizes: 35-50.
Fluid barrier that dams or directs spilt liquids. With built-in end connectors to easily join multiple barriers. Ideal as a barrier in passageways during maintenance work, as a dam for directing liquid spills away from costly equipment or vulnerable environments. Highly visible yellow colour. Resistant to oil, water and most chemicals. Reusable after cleaning with a non aggressive detergent. Preferably to be used on a slippery surface. Dimensions: 3mx10mx7cm.
The Skipper road cone’s patented design features an integrated helix, which deflects wind and increases the cone’s stability. The innovative glass bulb shell is more reflective than prismatic alternatives and, like the entire Skipper range, is robust and durable. With a wide range of applications, from airports and traffic control systems to industrial and construction, the Skipper road cone is revolutionising road cones worldwide. Complies with BS EN 13422.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. Also suitable for limiting a spontaneous battery fire during charging. Transport bag included. Dimensions: 250x300cm.
This transparent mask for mouth-to-mouth resuscitation allows a goodviewof the victim. Packed in a hard box.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 50 x 50 cm.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
High ranger shoe in nubuck leather, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, abrasion resistant liner in textile and leather. Outsole in Nitril, SRA antislip, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 36-47.
