BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cable between Comtac VII and SCU. No PPE.
Replacement plugs for 3M™ PELTOR™ TEP, LEP en EEP. Attenuation: 23dB. Not separately tested as PPE.
The 3M™ PELTOR™ ComTac™ VI NIB Headset offers a hands-free adaptive VOX capability allowing face to face communication in full duplex for up to four talkers and up to sixty listeners within a 10 meter radius. This significantly increases the ability to communicate when on a boat, in tactical vehicles, aircraft, even in a loud small arms conflict without the need for tactical radio or intercom.
Ladies' winter parka multinorm 5206 82: Hidden zip and stud fastener in front. Two loops for communication equipment. Vertical chest pocket with zip on right chest. Keyring holder. Side pockets with fleece lining and pocket flaps. Extended back with two side slits for enhanced movement. Adjustable cuffs. Wind stoppers in sleeves. Inside pocket for Ipad/documents. Fleece on the inside of the collar. Zip access for back heat seal badges. Available colors: Fluo orange / navy. Available sizes: S-2XL.
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 4,6 m - 6,1 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Semi-fixed height, single user mast. Semi-rigid masts have a limited (1.5 m) adaptability to optimize the anchor height during installation. Height: 5,3 m - 7,6 m. Offset/range: 3,7 m. PRICE WITHOUT TRANSPORTATION COST!
Hygiene set for hearing protector VERISHIELD VS100D/VS100DH/VS100DF
Short hose for motor unit PX5, in combination with the decontaminable harness (1053172).
Fireproof battery bag to safely transport, store and charge the battery of an electric bicycle. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Dimensions: 440x130x120 mm
Chemical resistant Neoprene air cap with integrated safety helmet, including belt with control valve for connection to compressed air network.
Welding Filter Battery Holder Spare Part for 3M™ Speedglas™ Heavy Duty Welding Helmet G5-01/G5-02.. Not separately approved as PPE.
Super light glasses (19g) made of clear polycarbonate. Thanks to an innovative new production technology, the uvex pure-fit can be made entirely from just one material. It is made entirely of polycarbonate and is therefore 100% recyclable — just like the product packaging. This makes the uvex pure-fit an extremely durable solution.
Low shoe in velours microfiber. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Complete kit contains, SR 500 fan unit, SR602 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Safety helmet made out of PE with standard peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
6-point suspension in textile with slip ratchet and sweatband for helmets EVO-range. No PPE.
Face shield in black woven nylon mesh with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 65%.
Face shield in black etched stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 80%.
The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can mount the face shields M1 (nylon wire mesh) / M2 (woven stainless steel) / M3 (etched stainless steel).
4-point suspension in textile with ratchet for X5500 helmet.
6-point suspension in textile with ratchet for X5000 helmet.
Polycarbonate replacement visor, for the EVO VistaShield helmet.
Complete anti-static air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Fall arrest block Rebel 20 metres stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. Weight: 10kg.
Stand-alone air purifier that recirculates and cleans the air in the room, specially designed for large spaces. Version with 4 wheels, capacity of 2500m³/hour. Air outlet on 4 sides.
Powerful and unique air purifier that easily and effectively removes extreme dust concentrations from up to 5000m³ of air per hour. Ideal for applications in steel processing, paper processing, factory halls, welding workshops, ... Removes both fine dust and coarse dust and ultra-fine dust from the air, resulting in a healthy and comfortable working environment and lower cleaning costs.
Air purifier that recirculates and cleans the air in a room up to 650m³. Removes unwanted odors and gases as well as unwanted particles. Has 4 wheels, making it easy to move. Extremely effective for removing all microspherical particles between 0.3 and 10 microns. The modular design allows you to adapt the capacity to your needs.
The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety product such as face shields, passive earmuffs or communication headsets and integrated eyewear.
Makes it possible to separate the mast from the base and transport it vertically with the forklift.
Spectacle kit to support pescriiption lenses, the position of the holder can be adjusted vertically as well as in depth.
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
6-point suspension in polyethylene with slip ratchet and sweatband for helmets EVO2. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 5,48m. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
TYVEK® IsoClean® Bouffant option 00 (Bulk Packed) Serged Seams. Elastic headband. 54 cm Diameter. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Tyvek® IsoClean Coverall IC193 B WH DS with attached hood and overboots (Double bagged) Bound seams. Hood - medical mask fit with ties, bound opening. Overboot with gripper sole and bound elastic. White. Available sizes: XS - 7XL (XS, 4XL, 5XL, 6XL <(>&<)> 7XL are made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
TYVEK® IsoClean® frock with bound neck option MS Bound seams. Covered elastication at wrists. Front snap closure for easy donning and doffing. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: S - 3XL For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILIZED
TYVEK® IsoClean® sleeve option MS Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
TYVEK® IsoClean® bouffant, option MS Clean-processed and gamma-sterilized.Elastic headband. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC 270B WS Labcoat Bound seams. Covered elastication at wrists. Front snap closure for easy donning and doffing. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: S - 4XL (4XL is made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Tyvek® IsoClean® IC 689B WS Hood w. integrated mask Hood with integrated mask and ties for adjustable fit in the chest area. Gamma-sterilized and double bagged. Aseptically folded. Hood: Bound internal seams. Bound face opening. White. Cleanroom-mask: Pleated Polyethylene outer. 17,5 cm. Blue. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Coverall – CTL428CM • Zipper closure • Attached hood • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Frock – CTL191CM • Mandarin collar • Zipper closure • No pockets • Tunneled elastic wrists with thumb loops Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Sleeve CTL850CMP-18 • Bound seams • Tunneled elastic • Thumb loops Case Pack: 50 pair Available sizes: one size, 18" length For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Coverall – CTL417CS • Zipper closure • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Case Pack: 25 Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Frock – CTL191CS • Mandarin collar • Zipper closure • No pockets • Tunneled elastic wrists with thumb loops Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Boot Cover – CTL903CSP • Tunneled elastic top • 19" high • Non-skid vinyl sole Case Pack: 50 pair Available sizes: SM/ LXL/ 2XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Sleeve CTL850CSP-18 • Bound seams • Tunneled elastic • Thumb loops Case Pack: 50 pair Available sizes: one size, 18" length For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Hood – CTL713CS • Covers shoulders • One size • Ties to customize fit Case Pack: 100 Available sizes: one size For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Device for practicing the use of the self-rescuer M40. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer.
Ideally designed for use with the Edge Aerosol flying insect control dispenser (1057272).
The Chill-Its 6670CT Evaporative Cooling Hard Hat Neck Shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The lightweight shade features advanced PVA cooling technology for instant cooling without bulk or slime, with a wide panel that extends down for complete back-of-neck-coverage. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook <(>&<)> loop straps.
Fall arrest device with external shock absorber. Usable with fall factor 2. Suitable for a maximum user weight of 140 kg when used vertically, when used horizontally the maximum user weight is 100 kg.
Stretchy mixed-material performance trousers. Contoured waistband with stretch details on the sides for increased comfort. Spacious side pocket with velcro fastening. Side zip with contrasting heat-sealed tape. Ruler pocket on the side with adjustable hammer loop. Knee pad pocket with top opening in abrasion-resistant fabric, which is also present at the heel. Contrasting rear zip with mesh for increased breathability. Press stud-adjustable length. Available sizes: S-4XL Available colors: black/denim blue, black/phantom
Cool baseball jacket in Alsi-flex. Quality: 79% recycled polyester, 21% cotton - 265 gr/m² super stretch Available colors: black, shade blue, bottle green, charcoal, convoy gray, camel brown. Available Sizes: XS-4XL
P3 screw-on filter DIN 148 in plastic housing with reduced opening. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow motor unit.
Height adjustable mast for 2 users. Height-adjustable masts can be easily adjusted using the integrated winch or with a drill fitted with a slip clutch (accessory). Height: 4,5m - 6,1m. Offset/range: 3,7m. PRICE WITHOUT TRANSPORTATION COST!
ABEK1 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates. Class 1 gas filter: for max. concentration of 0.1%.
P3 filter for 3M half masks Secure Click. Protects against toxic dust, mist and smoke particles, ozone and annoying odor levels (not higher than the legal limit value at work) of organic gases and vapors and acidic gases.
Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2 and toxic particuls and vapors. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Temples consist of 45% recycled material (PCR & PIR) and 22% recycled PET. Equipped with clear polycarbonate lenses that consist of 71.5% mass balanced polycarbonate.Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Excellence coating. Frame: beige/green. PCF (Product Carbon Footprint) = 0,10kg CO².
