BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Inflatable rescue harness (automatic).
Crowd control helmet made of glass fiber with fire retardant gel coat layer, shock inner lining in PU, 3mm thick pc visoer with anti-mist treatment, neck guard is coverd with flame retardant textile and is attached with press buttons on the inside of the outher shell. The helmet has 7 ventilation holes through the outer shell. The inner liner can be removed whitin seconds and does not absorb any liquids. The chin strap is constructed to be easy to adjust, close and open all with duty gloves on. The chin cup is big enough to make sure that the helmet stays in position during fights.
Long John for men without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS - 4XL. Available color: White.
The Peltor COMTAC XPI is an active noise reducting ear muff. Has a 2-way radio communication in noisy environments.
Ballistic goggle with panoramic view. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
Multinorm polo Dronten with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Cuffs at end of sleeves; Vertical reflective stripe on the sleeve. Quality: Protex® + Lenzing FR + para-aramide + AST; ± 220 g/m². Available sizes: S-5XL. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 5,5 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Multinorm softshell Hollum with arc protection: Straight collar Zip closure under flap; 1 patched chest pocket with zip closure; 2 inset pockets; 1 loop for gas detector; Round sleeves; Sleeve narrowing by touch and close fastening; Elastic drawstring in hem. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-5XL. Available colors: Fluo orange. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 3 and EN 14058 : 2017 / Class 1 3.
Work jacket Taltiu: - rounded back; - raglan sleeves; - multipocket; - reflective accents. - stretch elements M-Move - Industrial laundry 75°C Quality: 65% recycled polyester, 35% Lyocell cotton, 260 g / m². Color: Gray / black and gray / yellow. Sizes: 42-88 BE.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEKHgP3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia and its derivates, mercury vapours, dusts, mists and fumes. Suitable for ATEX environments.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
Perforated safety sandal in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
The Lombatrax differentiates through its unique inflatable expansion system (air chambers) to provide a combination of effective treatment, support and pressure relief in the spine. The ideal solution for drivers! Available sizes: S-3XL.
Trousers Fermi Diablo Multinorm: atpv 39 cal / cm; - knee pockets; - side pockets; - back pockets; - thigh pocket. Quality: POLYAMIDE 100%, 330 gr / m². Available sizes: 44-68 BE. Available colors: Fluo yellow / navy. Conforms to: EN ISO 20471 Class 1, EN ISO 11611 Class 1, EN ISO 11612 A1A2B1C1D3E2F1, En 1149-5, IEC 61482-1-2: 2014 Class 2 and EN 13034: 2005 + A1: 2009 TYPE PB [6].
Multinom jacket Fermi Diablo 13242: atpv 39 cal / cm; Elim 33 cal / cm; breast pocket; 2 front pockets. Quality: POLYAMIDE 100%, 330 gr / m². Available sizes: 44-68 BE. Available colors: Navy / yellow. Conforms to: EN ISO 20471 Class 1, EN ISO 11611 Class 1, EN ISO 11612 A1A2B1C1D3E2F1, En 1149-5, IEC 61482-1-2: 2014 Class 2 and EN 13034: 2005 + A1: 2009 TYPE PB [6].
Softshell haute visibilité 403021 : poignet côtelé connectable; sacs scellables; Col bomber côtelé; Dos allongé. Tailles disponibles : XS-6XL. Coloris disponibles : jaune fluo/marine, orange fluo/marine, rouge fluo/marine. Conforme à : EN ISO 20471 Classe 2.
The polo sweater bicolor with breast pocket for ladies from the Tricorp Workwear label is a popular item. This durable two-tone polo sweater is shape and colorfast thanks to the combination of cotton and polyester. Thanks to an elastic hem at the bottom, it protects better against wind than other similar sweaters, the inside is roughened for extra comfort while wearing. Fabric: 60% cotton / 40% polyester, American fleece, 280 g / m². Available colors: navy, black / gray, black / red, black / orange and black / green. Available sizes: XS-3XL.
Stainless steel spare blades for KS101SS. No PPE.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
Face shield against arc flash for the electrician with continuous flap. EC type testing according to EN166-170 and GS-ET-29 (CE0340) Arc class 1. (4kA-0.5sec-350mm) light transmission >75% = class 0 Face protection against electric arcs during short-term switching work and other work that is carried out under voltage, such as in cable distribution boxes, house connection boxes and when changing kWh meters. Inserting and pulling knife cartridges, manufacturing branch sockets and similar work. This face shield provides no mechanical protection. Window material: 1.5mm thick acetate, Hood material: NOMEX 3T/A.
This flame-retardant lining is fit for the Heflin rain jacket. The lining is made of 100% polyester with zip closure and slitopening to inside pocket of rain jacket. Available colors: navy.
Flame-retardant and anti-static work jacket with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX, 260 g/m². Available sizes: XS-4XL. Available color: navy. Complies with: EN ISO 16112 A1+A2 B1 C1 E1 F1, EN 1149-5, EN 13034-6, EN ISO 11611 Class 1, IEC 61482-2 Class 2 ELIM: 15.0 cal/cm² ATPV: 18.0 cal/ cm²). PPE category 3.
Hi-Vis work jacket. Zipper with press studs. Extended back. Chest pockets with flap. Key ring under the flap of the right breast pocket. Vertical zip pocket. Sleeve pocket. Side pockets. Adjustable waistband and cuffs. Two inner pockets. Quality: 54% cotton / 46% polyester, 260 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XS-4XL. Complies with: EN ISO 20471 class 2.
Flame-retardant Hi-Vis rain coverall in PU quality with quilted lining: • Fixed hood in the collar; • Concealed zipper; • Elastic at the waist; • Two breast pockets; • Two leg pockets; • Tool pocket on the leg; • Sleeves with wind stoppers; • Zipper and storm flap on the legs. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Lining: FR quilted cotton lining with polyester filling. Available colours: fluorescent orange/navy and fluorescent yellow/navy. yellow/navy. Available sizes: XS-5XL. Complies with: EN 343 3.1., EN ISO 20471 Class 3, EN 1149-5 and EN ISO 14116.
Helmet shell for 3M ™ Speedglas ™ automatic welding mask G5-02. Without headband, front or anti-glare cassette.
Flame retardant work trousers with extra visibility. With swept back side seams and double layering at the front for extra heat protection. The trousers are made in a strong and supple satin, specifically developed for work with zinc and chemicals. Side pockets. Back pockets with flap. Ruler pocket with flap. Contrasting seams. Quality: Apex 300 gsm. Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm².
Women's softshell with zipper, 2 set-in side pockets with zipper, 2 set-in chest pockets with zipper, of which the right breast pocket has a D-ring for badge holder, pen pocket on sleeve, adjustable waist by means of a zipper. drawstring, breathable, windproof and water repellent, sleeves adjustable by means of adjusters velcro, storm flaps, extended back, reflective piping, chin protector. Quality: 92%/8%, 100%, 100% | polyester/elastane, PU membrane, polyester | 3-laminate | 320gr/m². Available sizes: XS-4XL. Available colours: Indigo Blue and Charcoal Gray.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 42 inches. Material: plastic.
Standard battery for PX5. Usage duration depends on filters used. Charging time: 5h.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal.
Breathing hood in Tychem 2000 together with a bump cap and breathing hose. To combine with the motorunit PX5 or with compressed air system.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Flame retardant Hi-Vis ladies shirt with extra visibility. Non-Metal. Concealed front closure with plastic press stud closure. Chest pockets with flap. Adjustable cuffs. Available colours: Navy/Fluo Yellow. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 D1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2 CL.1, ARC RATING: 10.5 cal/ cm².
Unisex sweater ESD in accordance with IEC 61340 - 4 - 9:2016.
Synthetic combat glove, with kevlar protection elements on the knuckles and ventilation on the top of the finger. Water resistant, Touch screen on the palm and all fingers. Chrome free. Suitable for public order and police services. Sizes: 7-12. Complies with: EN388:2016 3.1.3.2.X.P, EN407 X.1.X.X.X.X
The Compact Supreme 275 Heavy Duty Wipe Clean Lifejacket is ideal for heavy duty commercial fishing applications such as crab and lobster fishing. She is also suitable for construction workers. Colour: Orange. Buoyancy: 294N In accordance with: EN ISO 12402-2 : 2006 +A1 : 2010 for inflatable lifejackets performance level 275 EN ISO 12401 : 2009.
Hi-Tide HAMMAR inflatable life jacket: • Durable waterproof fabric • Double shoulder straps • Zip fastening cover • Stainless steel interlocking belt buckles • Adjustable waist belt • Detachable crutch strap • Integrated deck safety harness approved to EN ISO12401. Color: Red Buoyancy: 294N
Ultrafit horseshoe design, 275N, double chamber inflatable life jacket. Ideal for heavy offshore work with bad weather clothing and heavy equipment. - In accordance with: SOLAS, EN ISO 12402-2 : 2006 +A1 : 2010 for inflatable lifejackets performance level 275 and EN ISO 12401 : 2009.
Hi-vis rain trousers Batur: Narrowing at leg end by means of press studs; Elastic waist. Quality: 100% polyester knit with PU coating; ± 170 gsm. Available sizes: S-3XL. Available colours: Fluo orange. In accordance with: EN 343 4:1 and EN ISO 20471 class 1.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Aluminium ring frame for mounting a windsock with 300mm diameter opening, bogie included.
Filter holder.
Headband suitable for Speedglas G5-02 welding helmet. Includes attachment set. Not separately approved as PPE.
Fully inflatable life raft for 6 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 397 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 20.5 kg.
Lightweight and quick to deploy shelter. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions: 400x400x250cm. Weight: 58kg.No PPE.
Hygiene set for hearing protector VERISHIELD VS130D/VS130M
Charging cradel with charger for 5 led lenser lamps. No PPE
Kit of level dependent rechargeable earplugs. They help protect your hearing, and can help improve situational awareness and communications in challenging environments. Intuitive one-button operation. Integrated with state-of-the-art level-dependent technology, the LEP-100 helps provide hearing protection in noise and situational awareness in quiet environments.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
The new 3M™ PELTOR™ ComTac™ VII headset is designed to allow for dual hearing protection. It can be used in combination with 3M™ PELTOR™ TEP-300 earplugs, or passive earplugs. A new headband design helps to make transition between rail mounted systems and headband easier. It can also help to improve comfort when worn under a ballistic helmet. Natual Interaction Behavoiur (NIB), helps to improve close range face-to-face communication in steady state noise environments.
Utilizing near field magnetic induction, the 3M™ PELTOR™ System Control Unit helps to improve cable management through cord-free connection to the 3M™ PELTOR™ ComTac™ VII Headset, and 3M™ PELTOR™ Tactical Earplugs, TEP-300. There is also a port for an optional wired connection to the 3M™ PELTOR™ ComTac™ VII Headset. The SCU is equipped with three com ports for radios and intercom systems, and is designed to handle multiple radios with multiple channels. The SCU is also available with Bluetooth® technology. The SCU can be remotely operated via a wireless remote control unit (RCU). It is designed to be mounted on a picatinny rail, but can be placed elsewhere. Besides using the remote as a push-to-talk PTT, it can also be used to adjust the volume level of the environmental listening or radio. No PPE.
Flame retardant jacket E2274-106: Spread collar Closure by 5 covered snap buttons 1 patch breast pocket One inside pocket on the right 2 lower patch pockets with flaps Turned-back cuffs Wider flaps. Composition: 52% cotton, 38% type-F acrylic, 10% satin flame-retardant viscose - 340 gr/m². Available sizes: 0-6 FR. Available colours: Navy. Complies with: EN ISO 11612 A1/B1/C1/D2/E2/F1 and EN ISO 11611 class 1.
Earmuff helmet WS Alert X with Bluetooth and level dependent function (surround). The Bluetooth® headset with noise-cancelling stick microphone connects to your mobile phone for hands-free calling and streaming in noisy environments. The headset helps protect you from dangerous noise while promoting your situational awareness through the level-dependent function for listening to the environment. The headset also syncs with a mobile app, allowing users to easily set up and customize the headset. SNR: 30dB. In accordance with: EN352-3.
Earmuff WS Alert XPI with built-in FM radio receiver, Bluetooth and level dependent function (surround). The Bluetooth® Multipoint Headset with Noise Canceling Microphone connects to a mobile app to make it easier to set up and customize the headset while wirelessly connecting two Bluetooth devices, such as a cell phone and a walkie-talkie. The headset helps protect you from dangerous noise, but also makes it easy to use both hands free on the phone in noisy environments. SNR: 30dB. In accordance with: EN352-1.
