BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Perforated safety sandal in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
High shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. Also suitable for limiting a spontaneous battery fire during charging. Transport bag included. Dimensions: 250x300cm.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. With metatarsal protection XRD MET GUARD. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Equipped with 2 large self-closing aluminum hooks and 1 auto-lock aluminum hook. Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
For use together with Sundström compressed air filtration system. Type A protects against oils, organic gases and vapours, such as solvents, with boiling points > +65 °C. Type P3 protects against all types of particulate pollutants, e.g. dust, mist and smoke.
Centurion adapter S565 for 30mm slots.
Life buoy approved by Netherlands Shipping Inspectorate, outer diameter 75 cm, inner diameter 45 cm, diameter: 11 cm. Material: polystyrene with steel reinforcement and oil and petrol resistant nylon cover. Characteristics: with grab loops, 30 metre life line. Weight: 4.5 kg. Applications:
Sweatband in purple cloth with Velcro for helmet 3M 100 series.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
AED sticker (green with white) 10 X 10 CM
High shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 34-42.
GFE 30 Throw line holder with floating throw line 30m, diameter 6mm with instruction sticker.
A low-cut safety shoe with an outdoor-inspired design. With an upper reinforced with technical ripstop fabrics, light and resistant. EVA/hydrocarbon-resistant and non-slip rubber sports sole. Lightweight 200J aluminium toe cap, anti-perforation sole (wide toe cap) in composite, light, flexible, athermic and non-magnetic, ESD. Versatile, the ULTRA is designed for logistics, transport, light industry and construction finishing. • Model that meets the requirements of ESD environments. • It adapts perfectly to dry indoor and outdoor environments.
High shoe in water-resistant PU-coated leather and split leather, an aluminium 200J toe cap and synthetic anti-perforation sole. Equipped with a plasma-treated composite (PTC) textile nail protection. Sole in PU/PU, SRC slip-resistant, resistant to oils and acids. PU midsole. Removable insole in polyurethane with textile layer. ESD compliant. Sizes: 36-47.
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
Ki-Waistcoat TR310 with integrated lifevest: • Buoyancy 310N • Tricot mesh; • ID pocket; • VHF pocket; • Antenna/mic attachment; • Knife attachment; • Adjustable width; • Crotch strap. Available colours: Fluo yellow. Available sizes: S/M, L/XL and 2XL/3XL.
Absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipe s are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for abs orbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorptio n capacity: 102 litres.
Replacement filters for flowstream air regulator. AK filter that removes unpleasant odours and taste from compressed air. Suitable f or: processes involving chemical risks.
Shot blasting helmet made of polyester fibreglass with wear resistant rubber outer layer that also reduces the impact noise from the reflected shot blasting agent. The wire mesh in front of the visor and the replaceable lenses protect the visor. The Commander helm et provides a concentrated field of vision. Washable cotton neck seal provides additional comfort and safety. Cape made of bisonyl. For connection to compressed air line. Usable for chemical applications due to liquid-proof seams. Includes airflow indicator. Inclu des belt, regulator and hose. Weight: 2500g. Required pressure: between 4 and 10 bar. NPF: 1000.
Hazardous electrical voltage. Hazard warning sign in polypropylene. Dimensions: 100mm. 3 pictograms per sheet.
Fire extinguisher. Fire action sign in self-adhesive polyester. Dimensions: 148x148mm.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 124 litres. The absorption material in the spill kit is of M RO quality.
Use the universal locking system to lock butterfly valves: the clamp is placed on the butterfly valve, preventing the pull lever from being pressed. The valve cannot be set to another position. Not PPE.
Glove with nitrile coating (cotton/polyester). Length: 30cm. Glove with high finger sensitivity.
Rain trousers, Flexothane, Elasticated waistband with drawstring, Wide legs with zips to give extra room over forestry boots.
Spill truck XL for absorption of chemical liquids with content: 20xHAZ124 - 1000421136xHAZ412 - 100421016xHAZ1818 - 1004213150xUN100-E - 1004202
Fireproof storage cupboard for storing hazardous materials, high model with 2 hinged doors fitted with a profile cylinder lock. Powder-coated exterior finish. The interior has a light-chemical-resistant plastic finish. The 2 doors are self-closing and can be easily opened by means of an air spring. The cabinet contains of 3 sheet steel sump trays with load capacity of 150 kg and collection capacity of 33 litres and 1 sheet steel bottom tray with collection capacity of 55 litres. There are intake and exhaust openings at the top of the cabinet (fan as option). The cabinet is 90 minutes fire resistant. Dimensions: 1196x616x1968 mm. Weight 451 kg. Delivery in house is possible on request.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Model pedestal eye/face wash shall include a green ABS plastic 11" bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include 1-1/4" Schedule 40 hot- dipped galvanized steel pipe and fittings along with powder-coated cast- iron 9" diameter floor flange.
Drench shower for vertical installation shall include a green ABS plastic 270mm diameter showerhead with integral self-regulating 76l/min flow control, chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Stainless steel pull rod with triangular handle. Pictogram SP177 included
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Modern, blue metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Matching case also available. Suitable for light or medium mechanical work and laboratory applications.
Colored cotton cleaning cloths. Box of 10kg.
Needle container 450ML. Dimensions: 170 x 105 x 50 mm.
220 gsm, 100% nylon, 6-panels, 3M reflective contrast trim on peak , tear release fastening. Colours Orange and Yellow EN 471 certified.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Gauze pads 100% cotton, surgically folded with turned-up fringed edging.
Chainsaw trousers with frontal protection with stretch Pezaflex inserts, ventilation thanks to the use of mesh inserts on the back, Pezatec and Pezaflex stretch outer fabric, outdoor fabric water repellent treated with Teflon HP, three needle stitching on the back of the cross, reflecternde piping below the knees, elastic waistband with belt loops, metal buttons for braces, lumbar top, zipped fly closure with two metal buttons, 2 inset pockets with splash proof zipper, 1 patch leg pocket with splash proof zipper, first deployed pocket with splash proof zipper at the back, 1 ruler pocket, inside with 6 layers of protection material, nylnet lining for optimal comfort.
Handsirene standing model Material: Plastic Frequency = 550 +- 20Hz Capacity = 110 +- 2dB(A) at distance 1m Product dimensions: L210mm x B140mm x H240mm Weight: 0,6kg
Wrist band for TWIG EMBODY or NEO.
Secubox midi with safety glasses symbol. With mousse insert for 4 glasses. Dimensions: 236 x 225 x 120 mm. With fixation material. No PPE.
Replacement cap T-airline 1000M x2.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Sportive safety spectacle with grey polycarbonate lenses provided with the Supravision Excellence coating: antifog and antiscratch. 100% metal free. The end of the temple has a notch so that an eyewear cord can be attached to the spectacle. Frame: grey/anthracite.
"Ice" at a constant temperature of 15˚C. These extra cold 15˚C cool packs are mainly used for pre-post cooling of athletes and to cool down after an injury or after medical treatment. Or for someone who just really likes a low temperature cooling on the body. th only REACH registered and USDA certified 100% bio PCM on the market!
Well designed fireman's helmet made of thermo-hardened phenol textile, coated with photoluminescent paint and finished with reflective strips. Easily replaceable PU suspension, height adjustable, with a 4-point fastening strap with wheel ratchet. Pyros offers exceptional shock absorption and is resistant to extreme temperatures. The polycarbonate shield is scratch resistant and forms a hermetic seal at the top to protect against spattering. Shield tested in accordance with EN14458. This high-quality helmet can be worn in combination with corrective glasses, standard compressed air masks with a spider strap, and a communication system. Can be optionally equipped with a neck flap (see figure/ref.: 05550001). Total weight: 1150 g.
J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Acetate visor (230x370mm). Offers protection against chemical splashes, liquids and mechanical hazards.
Comfortable padded tool belt for easy rig support. Thick, vented foam padding for comfort, double tongue metal roller buckle, grommets set firmly for durability, suspender anchors.
Rope grab for use with 10.5 mm kernmantle rope. For vertical fall protection on a temporary safety line. Follows the person's movements along the rope autonomously, without manual intervention. Easy to remove and install on the rope. Includes connection to the chest anchoring point.
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
The 3M™ Peltor™ WS LiteCom Plus earmuff is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom Plus headsets and portable two-way radios programmed on the same frequency. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. Bluetooth® multipoint-connectivity. SNR: 33dB. In accordance with: EN 352-1
