BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Functional jacket: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inner pockets • adjustable cuffs. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black.
Hi-vis bib pants TX52: Durable polyester / cotton fabric with a Texpel dirt-resistant finish UPF 50+ fabric blocks 98% of UV radiation Reflective striping to be more visible 10 storage bags Phone pocket Knee pad pockets, sold separately Hem adjustable with Velcro for a good fit. Quality: 65% Polyester, 35% Cotton 245g Available sizes: S-2XL. Available colors: Fluo yellow / navy and fluo orange / navy. Conforms to: EN ISO 20471 class 2.
Salvequick Plastic Plasters are convenient high-quality plasters. The plasters are allergy tested. They are easy to apply, flexible and convenient to use. CONTENT: Each refill contains 45 plasters (27 plasters measuring 72 x 19 mm and 18 plasters measuring 72 x 25 mm). 6 refills/box.
Women's version of the T-shirt exactly 190 with long sleeves: - pre-shrunk material; - 1x1 rib-knit collar; - double thread stitched sleeves and bottom hem; - provided with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
The Roadrunner chainsaw protection chaps come in handy when you only use the chainsaw for a short time and chainsaw pants are just too impractical. The biggest advantage of the Roadrunner chaps is that you can quickly put them on over your regular work trousers or jeans with a few simple clicks. Thanks to the adjustable buckles at the back, 2 sizes (M for sizes up to XL and L for all sizes from XL) are sufficient to fit almost everyone. Quality: Water-repellent 65% polyester - 35% cotton outer fabric ± 210 g / m2. Available sizes: M-XL. Available colors: Grjis / black. Conforms to: EN ISO 11393-2: 2019 / class 1 - 20 m / s design B and EN ISO 13688: 2013.
Two-tone polo piqué with three-button placket and contrasting tipping on the collar. Contrasting ribbon at the neck and side slits. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Oeko-Tex* 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 200 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
Low shoe in full grain leather, fitted with a steel toecap and synthetic antiperforation midsole. Lining in Gore-Tex, insole ESD. Outsole in PU/PU, resistant to fats and oils. Sizes: 40-48
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have increased visibility. Side pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring for ID card holder. Ruler pocket with flap and reinforced bottom. Height-adjustable knee pockets. Bottom legs adjustable with press studs. Reinforced bottom hem at the back. Quality: Cantex Weld, 365 g/m² Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Hood with ARC protection (APC 2). This rain hood offers protection against heat, flames, liquid chemicals and offers also protection in welding situations. Available sizes: S-3XL. Available colours: Navy.
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Low shoe in split leather/mesh. Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable 3D polyester and breathable insole. Sole in PU/PU. Sizes: 35-42.
The new lightweight uvex pheos planet safety helmet is made of 30% biobased material and retains its shape even under lateral pressure – and meets the safety requirements in the construction and industrial sector. Short peak. 6-point textile harness with rotary knob, the headband is made from 50% recycled helmet shells. Thanks to the efficient accessory system, the helmet can be quickly and easily adapted to individual needs, such as attaching uvex pheos earmuffs, helmet-mounted lamp or visor. Head circumference : 52-61 cm. PCF (Product Carbon Footprint) = 2,0kg CO².
Light and compact rechargeable headlamp with light beams for short and longer distances, with white and red light. Comes with the CORE rechargeable battery but is also compatible with 3 disposable batteries AAA/LR03 (included). Easy to operate, (even with gloves) with 1 button, removable and washable headband. Weight: 106g, dust and water resistance IP67.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Chin strap 2-point for helmet G22C/D and G3000.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Peel-off protection foil 9993 for screen of full facial mask series 9000.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Charging cable for ACK081. Can be charged via an USB-port or connected to a FR08 (power supply). No PPE.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Compact professional headlamp with adjustable light suitable for explosive environments. Rechargeable battery is worn on the back of the head for ergonmic weight distribution. Battery can also be attached to clothing or equipment with an extension cable. Lamp is resistant to dust and water: IP68. Equipped with emergency lighting if the battery should run down during work. Charging time: 210 minutes. Very suitable as a mine light.
The reflective GFE sticker set featuring the latest technology, the 3M™ Diamond Grade™ DG³ reflective film, utilizes cube-shaped prism technology to return the maximum amount of light.
Women's fleece with full zip from the Progression collection, enhanced visibility EN17353.
Sportive spectacles in clear polycarbonate. The uvex i-lite impresses with its flat lens geometry as well as its modern design. In addition, the ergonomically shaped arms with multi-stage tilt adjustment ensure an optimal fit without pressure points.The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Absorbent socks measuring 13 cm x 3 m. These standard-weight socks are packaged in a bag. Packaged per 4 pieces. These socks can be easily connected together by means of hooks and rings. The yellow cord inside the sock provides extra solidity when picking it up. T hey do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint , vegetable oils and other water-insoluble chemicals. Absorption capacity: 119 litres.
Lamp for attachment to the helmet F1SF by MSA. The lamp has extremely powerful LED technology. Completely waterproof. Equipped with an ergonomic switch. The XP helmet lamp is photoluminescent, so they can be recognized easily in the dark. Comes with 4 AA batteries.
Model mounted eye and face wash features the medically acclaimed AXION MSR eyewash and eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
High-shoe S3, semi-orthopaedic, in full grain leather with toecap in aluminium sole with L-Protection. Equipped with 100% Nappa cowhide leather lining. Sole in Nitrile and HRO. Antibacterial insole. Sizes: 39-47.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 46 X 91 X 2,5cm. No PPE
Bandage scissors for cutting bandages or tape Material: stainless steel. Matt Silver - can be sterilised. Dimensions: 14 cm
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
High-shoe Ethyl in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 38-48.
White clog OB in soft, white leather. Special sweatabsorbing lining with Silver Point. Very light antislip sole in PU with shockabsorption and resistant to gasoline. Removable insole. Treated sanitized. Step-in surface with elastic band and adjustable fastening buckle. Sizes: 35-48.
Robust environmental cabinet for the storage of substances dangerous for the environment. Ideal for the storage of oils and fats or in a green version for the storage of pesticides. In accordance with ARAB/Codex well-being at work, Vlarem and PGS15 (The Netherlands) Robust construction made of galvanized electrostatic treated sheet steel. Finished with a thermal-applied epoxy coating (average thickness 90 µm) with a high chemical resistance, colour: grey RAL 7035. Turning doors in hinges bearings. Integrated ' Ergo-Lock ' handle (3 point lock) in black with 2 keys. Doors with top and bottom 1 grid hole for a good natural ventilation. Equipped with galvanized steel kuipleg signs. Trays approved according to WHG 19. Load capacity 80 kg (evenly distributed load trays) Trays adjustable height. Security icons of your choice eg. ' toxins ' Dimensions: 950 X 500 X 1950 mm Weight: 76 kg
Light safety spectacles with green Variomatic sunproof lenses and black flexible frame. Lenses coated with uvex variomatic darken within 10 seconds to provide the wearer with 100 % protection against UVradiation, and return to their original tint after 30 seconds - quicker reactions than any other coating. With the Supravision Plus coating: antistatic, scratch resistant on both sides, antifog and antistatic inside and out.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 5C-3.1 1 FT KN.
The 3M™ Goggle Gear, 500-Series is a low-profile design with an adjustable strap and indirect ventilation. These splash goggles with 3M™ Scotchgard™ Anti-Fog Coating help keep lenses clear in, steamy and wet environments.
Adhesive wound strips (5 strips) 75x3mm (x10)
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Flame retardant, antistatic and arc shirt with flat collar, closure with hidden press studs, 2 patch pockets with flap, 1 loop for gas detector, round inset sleeves with narrowing by press studs. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g / m². Available colors: Marine. Available sizes: S-3XL.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 50%, Polyamide 45%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
This PCM CoolOver provides a constant cooling temperature of 21°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Improve feeling of comfort and energy whilst standing at work. Ideal for any workplace where hygiene is important e.g. healthcare, food manufacturing, catering, hospitality, clean rooms or food retail. Made from a revolutionary ‘gel foam’ material that combines the best in durability and comfort. Material also has anti-microbial properties Closed cell construction means that no liquids can penetrate the mat and reduce performance. Easily cleaned – can be cleaned with detergent or can be steam sterilised. Fire tested to BS EN 13501-1 and slip tested to DIN 51130. Dimensions: 0.6m x 0.9m. Bigger dimensions available on request. Colour: Black.
The reversible Killybeg bib and brace trousers are perfect for those working in the food industry. It is easy to maintain and can be washed at 95 °C for optimal hygiene. These trousers come with elastic buckle braces on the front and back. Available sizes: S-3XL. Available colors: Blue and white. In accordance with: EN 343 3.1, EN 14605 and EN 1186.
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
The 3M™ PELTOR™ LiteCom Plus headset is based on a robust basic design with a number of added features. This is a headset that is designed for demanding use on a daily basis. It lets you talk hands-free and work safely regardless of harmful noise levels. Active level-dependent filtering of ambient sound ensures you are not isolated from your immediate surroundings, but can still hear alarms, unexpected sounds and calls for help. SNR: 33dB. In accordance with: EN 352-6
Fleece jacket with: • extra reinforcement on the shoulders, elbows and inside collar; • two side pockets with zip; • long 2-way zip with chin guard; • extended back; • cuffs with thumb loop. Quality: 100% polyester, 320 gr / m². Available sizes: XS-4XL. Available colors: red, navy, gray and black.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
Ladies jaacket Oyora with arc protection: Straight collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched slanted pockets with flap closed by concealed press studs 2 loops for gas detectors Round sleeves Sleeve narrowing by press studs Extended back Double stiched (2x2) flame retardant reflective striping (50mm). Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m²Available colors: Navy. Available sizes: 36-56.
