Shopping basket

There are no products in your shopping cart.

Back to overview

1000 products found

Filter products

Remove selection

Results for

Price range

to
  • (655)

Status

  • (10)
  • (2)
More
Less

Hand and arm protection

1000 products found
Filtered on: All catalogues
GLOVE GUIDE 5003W

Glove guide 5003w

Brand: GUIDE
Prod. No. 1039812

Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.

44.95 €
GLOVE COTTONPROTECT
Durable

Glove cottonprotect

Brand: GSA
Prod. No. 1038447

4.99 €
GLOVE CRYO MAWP/40CM

Glove cryo mawp/40cm

Brand: Cryo
Prod. No. 1007818

Comfortable waterproof gloves with multiple layers for extra protection. These gloves provide protection for the hands and arms against extreme cold and spatters of cryogenic liquids (liquid nitrogen). Indispensable for work in temperatures to -160 °C. Cryo Gloves are also extremely light and provide excellent tactility. Sizes: S / M / L / XL / length: 40 cm.
Testing supports a Convective Cold level of 4
and a Contact Cold level of 2, but the Abrasion Resistance level of 1 allows reporting of Convective and Contact Cold levels of 1 only.

vanaf 389.00 €
GLOVE AZOTE

Glove azote

Brand: PROCOVES
Prod. No. 1007820

This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.

103.00 €
WELDING GLOVE GUIDE 1275

Welding glove guide 1275

Brand: GUIDE
Prod. No. 1055187

Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.

16.80 €
GLOVE ALPHATEC 09-430

Glove alphatec 09-430

Brand: ANSELL
Prod. No. 1007609

111.50 €
GLOVE ARC FLASH & GRIP 26500V-CLASS 3

Glove arc flash & grip 26500v-class 3

Brand: REGELTEX
Prod. No. 1036974

Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.

126.60 €
GLOVE EDGE 16-500 (EX GLADIATOR)

Glove edge 16-500 (ex gladiator)

Brand: ANSELL
Prod. No. 1007217

Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.

6.06 €
GLOVE SENSITECT HEAVY

Glove sensitect heavy

Brand: GSA
Prod. No. 1007468

White gloves made of heavy cotton. Sensitect gloves have a perfect fit,and are ergonomic and extremely comfortable due to the Interlockquality. Can be worn either as a liner glove or for product protection.

0.33 €
GLOVE ALPHATEC 58-128

Glove alphatec 58-128

Brand: ANSELL
Prod. No. 1032196

Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.

10.04 €
GLOVE 55-5123

Glove 55-5123

Brand: TILSATEC
Prod. No. 1041480

The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.

10.70 €
GLOVE SHOWA 377IP

Glove showa 377ip

Brand: SHOWA
Prod. No. 1042472

Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)

21.74 €
GLOVE TEGERA 7363

Glove tegera 7363

Brand: TEGERA
Prod. No. 1049209

Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.

15.03 €
MITTEN KALOR KED 29201

Mitten kalor ked 29201

Brand: PROCOVES
Prod. No. 1007434

Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.

86.06 €
GLOVE SHOWA S-TEX 377

Glove showa s-tex 377

Brand: SHOWA
Prod. No. 1039228

Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)

14.99 €
GLOVE WINTER ACTIVARMR 97-631

Glove winter activarmr 97-631

Brand: ANSELL
Prod. No. 1039780

Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.

9.79 €
GLOVE GUIDE 6203 CPN

Glove guide 6203 cpn

Brand: GUIDE
Prod. No. 1034854

103.60 €
GLOVE FIREFIGHTER TREXSSQUALE-B

Glove firefighter trexssquale-b

Brand: ROSTAING
Prod. No. 1054532

Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659

84.50 €
GLOVE POLYSAFE FFK8/45

Glove polysafe ffk8/45

Brand: BENNETT
Prod. No. 1007437

resistant to 350°C. Perfectly cut resistant so ideal for commercial kitchens, processing hot items and in all industries which present cutting and heat risks.

61.80 €
GLOVE ELECTROVOLT 7500V-CLASS 1

Glove electrovolt 7500v-class 1

Brand: REGELTEX
Prod. No. 1022739

Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.

54.01 €
GLOVE ARC FLASH & GRIP 36000V-CLASS 4

Glove arc flash & grip 36000v-class 4

Brand: REGELTEX
Prod. No. 1036975

Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.

175.40 €
WELDING GLOVE TEGERA 134

Welding glove tegera 134

Brand: TEGERA
Prod. No. 1041293

Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X

38.08 €
GLOVE WG-1855HY U-FEEL

Glove wg-1855hy u-feel

Brand: WONDERGRIP
Prod. No. 1046937

Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)

3.04 €
GLOVE TEGERA OIL GRIP 8855

Glove tegera oil grip 8855

Brand: TEGERA
Prod. No. 1062107

This glove offers excellent grip in dry, wet, and lightly oily environments. The single nitrile foam coating on the palm makes the g love soft and comfortable while still providing a secure grip. Cut protection level C and reinforcement between the thumb and index finger. Knitted 18 gg lining with cut-resistant CRF® technology and partially recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016+A1:2018: 4.X.4.3.C

12.89 €
GLOVE ULTRANEO 420 (EX TECHNIC)

Glove ultraneo 420 (ex technic)

Brand: MAPA
Prod. No. 1007617

Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.

4.66 €
GLOVE FLEX & GRIP COMPOSITE CL. 0, 1000V

Glove flex & grip composite cl. 0, 1000v

Brand: REGELTEX
Prod. No. 1022731

Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 0: operating voltage 1000V, test voltage 5000V, special properties R (acids, oil, ozone) and C (low temperatures) .With 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-12.

58.48 €
GLOVE NEOPRENE 3416

Glove neoprene 3416

Brand: SHOWA
Prod. No. 1029340

Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016

15.45 €
GLOVE GUIDE 5126

Glove guide 5126

Brand: GUIDE
Prod. No. 1055106

Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.

31.86 €
GLOVE ALPHATEC 09-022 (SCORPIO HI-LO)

Glove alphatec 09-022 (scorpio hi-lo)

Brand: ANSELL
Prod. No. 1007614

Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.

41.58 €
VERSATOUCH 92-481 100 PCS/BAG

Versatouch 92-481 100 pcs/bag

Brand: ANSELL
Prod. No. 1021981

Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.

23.72 €
OVER GLOVE ACTIVARMR 96-003

Over glove activarmr 96-003

Brand: ANSELL
Prod. No. 1051269

Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.

37.80 €
GLOVE WELDING ARCOWELD

Glove welding arcoweld

Brand: GSA
Prod. No. 1007094

Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.

11.98 €
GLOVE ULTRANEO 450 (EX TECHNIC)

Glove ultraneo 450 (ex technic)

Brand: MAPA
Prod. No. 1007619

Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.

7.32 €
GLOVE TOUCHNTUFF 92-665 100 PCS/DIS

Glove touchntuff 92-665 100 pcs/dis

Brand: ANSELL
Prod. No. 1014151

Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.

26.28 €
GLOVE GUIDE 765

Glove guide 765

Brand: GUIDE
Prod. No. 1025528

Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.

12.12 €
GLOVE GUIDE 766

Glove guide 766

Brand: GUIDE
Prod. No. 1028352

Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.

5.53 €
GLOVE BLACKTACTILRC

Glove blacktactilrc

Brand: ROSTAING
Prod. No. 1034783

Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.

12.29 €
GLOVE PROFLEX 720

Glove proflex 720

Brand: ERGODYNE
Prod. No. 1034874

•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending

30.84 €
WELDING GLOVE TEGERA 19

Welding glove tegera 19

Brand: TEGERA
Prod. No. 1041286

Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X

11.06 €
GLOVE LDPE SOFTLINE LONG PLUS 90CM

Glove ldpe softline long plus 90cm

Brand: ECARE
Prod. No. 1058191

Extra long and thick single use glove for veteranary use or use in impoundments made of PE. Liquid tight, does not protect against c hemicals. to order by 50 pieces.

0.22 €
GLOVE ELECTROVOLT 26500V-CLASS 3

Glove electrovolt 26500v-class 3

Brand: REGELTEX
Prod. No. 1022741

Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.

87.35 €
ARM PROTECTOR MASTERCUFF60POVL

Arm protector mastercuff60povl

Brand: ROSTAING
Prod. No. 1034775

60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds (tested internally). With thumb hole and Velcro closure on upper arm.

14.71 €
GLOVE HYFLEX 11-812

Glove hyflex 11-812

Brand: ANSELL
Prod. No. 1042445

Glove with unique and patented knitted design (18 gauge) that allows the glove to tear easily at multiple high risk areas, significantly reducing the risk of hand injury if the glove becomes entangled in a rotating tool. Ultra thin design and nitril foam coating provides excellent tactility to grab even the smallest parts. ZONZ™ Technology offers extreme breathability to keep hands cool and comfortable. The wihte color allows quick identification of dirt to avoid product contamination. Antistatic, latex and silicone free: no transfer of silicone contaminants to metal parts prior to painting. Sizes: 6-11.

5.41 €
GLOVE WONDERGRIP OP-600L

Glove wondergrip op-600l

Brand: WONDERGRIP
Prod. No. 1046935

- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016

3.67 €
IMPACT GLOVE RINGERS R068

Impact glove ringers r068

Brand: ANSELL
Prod. No. 1048066

Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P

41.25 €
GLOVE POLYSAFE MULTI FTK/NT/35

Glove polysafe multi ftk/nt/35

Brand: BENNETT
Prod. No. 1007436

Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.

72.40 €
GLOVE GUIDE HXFIBR 6607

Glove guide hxfibr 6607

Brand: GUIDE
Prod. No. 1052737

Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X

27.47 €
GLOVE GUIDE 290W

Glove guide 290w

Brand: GUIDE
Prod. No. 1059337

Fully coated cut resistant glove with thick lining and a double coated palm. The latex coating ensures a flexible glove, even at low temperatures.

14.75 €
GLOVE ARGON CUT

Glove argon cut

Brand: PROCOVES
Prod. No. 1026047

Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.

36.46 €
GLOVE RAILTRACK LONG

Glove railtrack long

Brand: GSA
Prod. No. 1033556

High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4

5.75 €
GLOVE BLUE-ICE

Glove blue-ice

Brand: ROSTAING
Prod. No. 1042486

Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.

32.09 €
GLOVE HEATRESIST

Glove heatresist

Brand: ROSTAING
Prod. No. 1043491

High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.

27.99 €
GLOVE GUIDE HXFIBR 6610W

Glove guide hxfibr 6610w

Brand: GUIDE
Prod. No. 1052854

Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.

25.55 €
WELDING GLOVE GUIDE 3571

Welding glove guide 3571

Brand: GUIDE
Prod. No. 1055206

Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.

41.02 €
GLOVE BASETEK 12-320

Glove basetek 12-320

Brand: BASETEK
Prod. No. 1063470

13 gauge seamless knitted gloves,
100% high density polyethylene with elastane
Soft grey PU coating on palm, DMF<5ppm. Touchscreen.
Elasticated wrist. Sizes: 6-11 Conforms to: EN 388:2016: 4.X.4.3.C

3.80 €
GLOVE TEGERA 7361
New item

Glove tegera 7361

Brand: TEGERA
Prod. No. 1053010

Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .

8.00 €
GLOVE DRIVER

Glove driver

Brand: GSA
Prod. No. 1007059

Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).

vanaf 6.03 €
GLOVE ALPHATEC 87-190 YELLOW (ECONOHANDS

Glove alphatec 87-190 yellow (econohands

Brand: ANSELL
Prod. No. 1007513

Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 7-11.

1.11 €
GLOVE BLACKTACTILTOUCH

Glove blacktactiltouch

Brand: ROSTAING
Prod. No. 1040996

Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.

10.16 €
GLOVE TEGERA 297

Glove tegera 297

Brand: TEGERA
Prod. No. 1041301

Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111

26.68 €
GLOVE SHOWA CS710

Glove showa cs710

Brand: SHOWA
Prod. No. 1052610

Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).

6.80 €
GLOVE KYORENE PRO K01-403

Glove kyorene pro k01-403

Brand: KYORENE
Prod. No. 1059573

Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.

10.34 €
GLOVE ALPHATEC 09-928

Glove alphatec 09-928

Brand: ANSELL
Prod. No. 1007613

Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.

31.99 €
GLOVE FORRESTER SIP 2SA4

Glove forrester sip 2sa4

Brand: SIP
Prod. No. 1007242

Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.

44.04 €
GLOVE FORTEX 45CM, 11

Glove fortex 45cm, 11

Brand: GSA
Prod. No. 1023607

PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.

4.97 €
GLOVE PROTRI-1

Glove protri-1

Brand: ROSTAING
Prod. No. 1038670

Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.

57.24 €
ARM PROTECTOR ERGOMASTER45VL

Arm protector ergomaster45vl

Brand: ROSTAING
Prod. No. 1042491

Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).

16.65 €
GLOVE TEGERA 9190

Glove tegera 9190

Brand: TEGERA
Prod. No. 1041385

Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Wrist support, Chrome free, Velcro®, for allround work . EN 388:2003, 2322 EN 511:2006, 21X

42.35 €
GLOVE EDGE 48-125

Glove edge 48-125

Brand: ANSELL
Prod. No. 1042435

Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.

1.48 €
GLOVE RIG418B 36000V CLASSE4 BLACK

Glove rig418b 36000v classe4 black

Brand: ANSELL
Prod. No. 1051275

Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²

214.60 €
GLOVE TEGERA INFINITY 8845

Glove tegera infinity 8845

Brand: TEGERA
Prod. No. 1056993

Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F

22.60 €
GLOVE TEGERA OIL GRIP 8851
Durable

Glove tegera oil grip 8851

Brand: TEGERA
Prod. No. 1063149

Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Lining with 18 gg knitting technique and more than 90% recycled polyester.
Touchscreen. Oeko-tex approved.
CAT II . Conforms to: EN 388:2016: 4.X.1.1.A - EN 407:2020: X.1.X.X.X.X

6.66 €