BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Arm protector heat and cut resistant. Length 45 cm.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 500°C for 15 sec.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
Heat-resistant glove, Cotton, Nitrile-dots, Dots. Withstands contact heat up to 250°C, Extra long, for allround work. EN 388:2003 1.2.3.2 EN407 0.2.X.X.X.X
ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit. The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm. The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C). Suitable as a versatile sleeve for TIG, MIG and MAG welding. Suitable for both right and left arm. Sizes: M to XL Complies with: EN388: 2222X – EN407: 423234
Five-finger glove in Kermel terry cloth with wool fleece lining, short-term contact with 500°C, long cuff in split leather, Kevlar s titched, length 40 cm.
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Thermal silicone glove for food contact, resistant to temperatures up to 350°C. Fully waterproof and resistant to hot liquids and steam, featuring a comfortable cotton fleece lining and a long cuff for forearm protection. Total length: 45 cm. Suitable for bakeries, commercial kitchens, food processing industries and industrial applications. Sizes: 7 - 11 Compliant with: EN 407:433XXX – EN 388:3241X EN511:121
Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.
Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG. Length: 35–39 cm Sizes: 7–12 Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone free.
Very supple, black fireman's gloves, 100% leather with lining of interlock Kevlar® and cotton. Leather wrist protection with Velcro closure and 15 cm long cuff of supple cowsplit leather. Water repellent and heat resistant. Available in: black. Sizes: 8 / 9 / 10 / 11 / 12, length 35 cm, cuff 15 cm.
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Natural latex glove, smooth exterior, lined interior Motion freedom: excellent comfort thanks to lining (no irritating seams). Very high abrasion resistance and good resistance to various acids and ketones. Applications: treatment of frozen foods, vegetable growing, chicken breeding, perfume production, polyester lining, masonry work, inks and dyes production. Length: 31 to 33 cm (depending on size) Thickness: 1.15 mm. Sizes: 5-10.
