BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ABEK1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5 935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%. Suitable for : processes involving chemical risks.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. In line with: EN12941.
ABEK2P3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. risks. Weight: 345g.
ABE1 filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. If ABE1 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation o n a single battery is desired. Class 1 gas filter: for max. concentration of 0.1%.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Pre-filter for TR-600. Ensures longer life of main filter.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point> >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%. +A1:2008.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads.
ABE2K1P2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K f ilter of class 1: for max. concentration of 0.1%.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
ABE2K1HgP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
Protects against ammonia and organic ammonia vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%. Weight: 175gr.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 260g.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
PPE with CE - mark of class 3.
P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
P3 filter with thread connection EN148-1 in ABS housing.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
Set of 3 replacement filters for Aircare filter unit.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
P2 dust filter from 3M for direct connection to 3M half and full-face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter!
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
REAKTORP3 screw-on filter DIN 148 in aluminium housing. Protects against radioactive iodine, plus highly toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads. Weight: 260g.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.
