BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Regulator for mounting on gas bottle for manually testing or calibration of gasdetection devices.
Auxiliary filter adaptor to protect sensors of the BW Flex, Flex-i. Without filters and with filterclip to assemble filters on detector.
Tygon hose with metallic sintered particulate filter. Suitable for detector GasAlertQuattro, GasAlertMax XT and GasAlertMicro 5 PID.
Hibernation case to gain up to one year extra of operation on two-year CO and H2S versions of the BW Clip.
Replacement battery for GasAlertMax XT II
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
Reducer for mounting on gas cylinder for manual testing or calibration of diffuse Watchgas gas detectors. Not suitable for use with ractive test gases such as chlorine, ozone, ..
Filters to protect Gasalertmax XT pump. Kit with 5 filters.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Sampling hose to attach to the hand pump or motorised pump, hose to be ordered per metre, with a maximum of 30m.
Filters to protect sensors.
Filters to protect sensors of the BW Icon, Icon+ and Flex series. Kit with 10 filters.
Filters to protect sensors of the SST4 Micro.
The rain protector covers the sensors of the multigas monitor from rain and large debris. No PPE
The metal cage protects the multigas monitor against damage. No PPE
Used to depressurise the bottle permanently dedicated to the destruction or recycling. Enables secure transport.
Impact protection for BW Ultra display, clicks onto the device.
Demand flow valve with pressure sensor with connection to docking station (1062077) to provide automatic pressure alert via e-mail or on the docking station. To be used with watchgas gas cylinders for calibration or bumping.
Hydrophobic filter to protect the pump of the SST4 pumped.
Male connector for connecting the pumped SST4 device to a sampling tube.
Female connector for connecting the pumped SST4 device to a sampling tube.
Replacement sensor screens with gasket, kit of 10 pieces for detector GasAlertMax XT.
Keeps the RigRat operational in an atex zone without battery drain.
Filters to protect sensors of the SST4 Mini.
Tool to bump the SST1 detector without using the Watchgas app. Runs on 3 AA batteries (not included).
Tool to put the device to sleep for a maximum of 365 days without using the Watchgas app. Putting the device to sleep can extend its lifespan up to an additional 1 year. Runs on 3 AA batteries (not included).
Filters to protect sensors of the SST1 detectors.
Test cap as a spare part of the SST1, needed to bump test and manually calibrate the device.
Replacement clip including screws for all SST series detectors.
Test cap as a spare part of the SST4 Micro, needed to bump test and manually calibrate the device.
Test cap as a spare part of the SST4 Mini, needed to bump test and manually calibrate the device.
Manual pump with 30 cm probe and filter for gas detectors GasAlert, Icon and Icon+.
Plug for connection USB cable of the HGAS-HTRAM CO2 detector..
