BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Flexible glove in high quality flocked nitrile. The high abrasion and perforation resistance make this model excellent for the treatment of chemicals in refineries and for degreasing processes (e.g. in aviation and automotive sectors), drilling and cutting.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
Supple and chemically resistant gloves made of neoprene on a cotton liner. The exclusive outer finish provides an excellent grip. Sizes: 7 / 8 / 9 / 10 , length 35.5 cm.
Polyvinyl alcohol coated gloves with knitted cotton lining. Idea for processing aggressive chemicals and strong organic solvents. Virtually no reaction with aromatic and chlorine-containing solvents. Due to coating, the gloves are not suitable for working with water-based solvents!
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.
High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
The XA-326 is specifically designed to provide maximum "all-around" performance on slippery grip applications in non-hazardous chemical environments. The 13-gauge seamless wooly nylon liner and "backhand coated style" provide an excellent flexibility, minimizing h and fatigue, thus increasing productivity. A soft yet durable latex coating technology "MicroFinish" adheres to virtually any dry or slippery surface. Sizes: 6(XS)-11(XXL).
Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.
Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
Gloves made of heavy cowsplit leather. The gloves are lined and have a rubber reinforced cuff (7cm), elastic in the back and protection at the knuckles.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
White seamless knitted gloves with red PVC dots on the palm for grip.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Thin (15GG) and comfortable work glove made from merino wool to keep your hands warm, suitable as an inner glove in cold environments. Touchscreen and food approved. Sizes: 6-11.
Dark green disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 6,0 g / Thickness: 0.12.-0,17mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact (10/2011). Available sizes: S-XL.
Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 6,5/7 - 9,5/10.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Very comfortable seamless knit glove in a nylon double-nitrile fabric for superior grip. Sizes: 6-11.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 1: operating voltage 7,500V, test voltage 10,000V, special properties R (acids, oil, ozone) and C (low temperatures). Length 41 cm. Supplied with 1 pair of over-gloves.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
Durable glove made from 90% recycled nylon fiber (15 gauge) with a nitrile foam coating on the palm. Touch screen compatible. The ZONZ™ patented knitting technique provides improved and comfortable hand movement. Less packaging material by omitting plastic in the inner packaging. The FORTIX™ technology ensures that the glove is 20% more abrasion resistant, and can therefore be used longer in applications where a lot of abrasion resistance is required. Latex, silicone and DMF free. Suitable for use in the food industry. Sizes: 5-12. Complies with: EN388:2016: 4.1.3.1.A, EN407: X.1.X.X.X.X.
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Tester for inflating and visually inspecting electrically insulating gloves of classes 00 and 0 for damage. It is recommended to perform the test before each use of these gloves. Model EOS 9030, diameter 130mm for gloves type IEC
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Orange Hiviz winterlined glove with seamless acrylic liner, water thight and fully latex dipped. Sizes: 8-11.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Chemical resistant glove with multiple barriers. Innovative multi-layer polymer design with nitrile-neoprene-nitrile layers. Provides protection against a variety of chemicals from acids to bases to hydrocarbons and organic solvents. Featuring the latest Michrochem chemical barrier technology for superior protection in hazardous conditions. Inside of soft nylon lining for comfort and extra mechanical protection. Oeko-Tex standard 100- approved. Permeation time> 30 minutes for 13 of the 18 chemicals listed in EN ISO 374: 2016. Antistatic, latex and silicone free. Length: 35 cm, thickness 0.38 mm. Sizes: 6-11. Conforms: EN388: 2016 3.1.2.1.A, EN407: X.1.X.X.X.X, EN ISO 374-1: 2016 Type A: ACFGJKLMNOPST, EN ISO 374-5:2016
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Fully coated PVC/NBR, water, and oil resistant, with chemical protection. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Sizes: 7-12. Conform: EN388:2016 4.X.3.1.C.P, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMPT, EN374-5:2016:VIRUS
Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED. Sizes: 5-12 Complies with: EN388: 4X43D, EN407: X1XXXX
Seamless knitted cotton, No PPE 400gr/12pair
Blue microporous cryogenic SAFEGRIP glove lined with wool. Guard of 15cm in leather. Equipped with a Velcro closure at cuff. Thickness: 1mm. Length: 40cm.
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Sturdy gloves in 100% black nitrile with rolled edging. Fully powder free. Length 240 mm, thickness 0.12 mm. Sizes: 5.5-6 / 6.5 -7 / 7.5-8 / 8.5 - 9 / 9.5 - 10.
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
AlphaTec® 02-100 laminated safety gloves have a five-layer design with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
