BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Sturdy glove made of 100% nitrile with rolled cuff. Lightly powdered and completely free of natural rubber proteins. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12. ASTM F2625 CAL10,3 ATPV2
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Cut-resistant glove made of special graphene fibers with black HCT® nitrile microfoam coating on the palm. These fibers provide heat regulation and keep hands comfortable. Bacteriostatic kills harmful bacteria. Odor neutralization so that the gloves stay fresh to smell. Without glass and steel fibers. 13 gauge.
Gloves with supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Antistatic.Good grip in damp conditions.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
Glove with full nitrile coating on low-lint seamless knit polyester/nylon liner. Glove with high sensitivity and good grip thanks to the rough finish.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
Comfortable waterproof gloves with multiple layers for extra protection. These gloves provide protection for the hands and arms against extreme cold and spatters of cryogenic liquids (liquid nitrogen). Indispensable for work in temperatures to -160 °C. Cryo Gloves are also extremely light and provide excellent tactility. Sizes: S / M / L / XL / length: 40 cm. Testing supports a Convective Cold level of 4 and a Contact Cold level of 2, but the Abrasion Resistance level of 1 allows reporting of Convective and Contact Cold levels of 1 only.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 2,500 volts, operating voltage of 500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Goat leather welding glove, unlined. Good finger sensitivity. Split leather cuff with Kevlar seams. Length 31 cm. Sizes: 7-11.
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Glove with unique and patented knitted design (18 gauge) that allows the glove to tear easily at multiple high risk areas, significantly reducing the risk of hand injury if the glove becomes entangled in a rotating tool. Ultra thin design and nitril foam coating provides excellent tactility to grab even the smallest parts. ZONZ™ Technology offers extreme breathability to keep hands cool and comfortable. The wihte color allows quick identification of dirt to avoid product contamination. Antistatic, latex and silicone free: no transfer of silicone contaminants to metal parts prior to painting. Sizes: 6-11.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Industrial protective glove. Synthetic textile liner with a synthetic coating. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF- free, antistatic and food approved. Sizes: 6-11.
Gloves in soft jersey lining with natural rubber coating. Comfortable, smooth latex for excellent grip on wet and smooth items. Also insulates against cold.
Driver extra gloves are very light, supple and durable. This glove is extremely comfortable and has a perfect fit. The top-quality sheep skin leather also provides very good tactility.
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 5,000 volts, operating voltage of 1,000 volts. Length 41 cm, Sizes: 7-12.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Durable, heat resistant Kevlar glove with heavy coton liner, 35 cm long. Cut resistant and isolating till 350°C.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Extra long and thick single use glove for veteranary use or use in impoundments made of PE. Liquid tight, does not protect against c hemicals.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Orange insulating natural rubber gloves. Their thinness and grip surface make them easy to handle. Excellent dexterity. Sensitive to touch, maximum grip in wet conditions. Working voltage of 1,000 volts, test voltage of 5,000 volts. Sizes: 7–11 Compliant with: EN60903 Class 0, AZC. Arc Flash: ASTM F2675. ATPV: 12 cal/cm².
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
Welding gloves made of grey cowgrain leather with 15 cm protective cuff and cowsplit leather backing. Safe seam reinforcement around the fingers. Sizes: 10.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Seamless glove in nylon / polyester with polyurethane coating on the palm. Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly, electronics, inspection, painting. Sizes: 7-11.
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
A real innovation within hand protection thanks to the use of new Black Dyneema® Diamond Technology. This new technology grants the Dynablade Foam Black a hight cut resistance level 5 without use of any other cut resistant fibre such as glass fibre or steel. All of this results in a unique and comfortable glove (13 gauge). It has a high performance foam nitrile coating (without silicones) with exceptionnal grip on oiled or slippery surfaces. Thanks to the Dyneema Diamond fibre your hands are well ventilated and the glove receives a "cool" grip. The black colour of the glove makes it a perfect solution to be used in grimy environments. Perfect for use in applications where a high cut resistance is needed, such as assembly of thin parts. Available sizes: 7-11. In line with EN 388 4.X.4.2, ISO 13997 Class D.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Flexible adapting cut protection glove without coating, developed in collaboration with food companies. Ideal to put on under a disposable glove or chemically resistant glove. Oekotex and touch screen
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
Glove with nitrile coating on cotton / polyester liner. This glove provides protection for the whole arm. Length: 65 cm. Glove with high sensitivity and good grip.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
The thermal acrylic lining provides excellent thermal insulation so work is more comfortable. Excellent thermal insulation. Soft, non-fluffy. Very absorbent to maintain dry hands. Ideal as a liner under unlined over-gloves. Sizes: 7 and 9.
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.X.1.1.A - EN 407:2020: X.1.X.X.X.X
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff. Attractive, highly visible look with yellow and b lue stripes. Available in: yellow/blue.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
5-finger glove with palm in split leather and aluminized back. Wool lining. Kevlar seams. Glove with contact heat up to 100°C. Materials are resistant up to 250°C. Length 40 cm.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The grey coating camouflages dirt when working in polluted environments. Sizes: 5-11.
