BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.
Fully coated cut resistant glove with thick lining and a double coated palm. The latex coating ensures a flexible glove, even at low temperatures.
Green nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds (tested internally). With thumb hole and Velcro closure on upper arm.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Gloves made of black neoprene, flock-lined with cotton for perfect absorption of moisture from perspiration. With diamond pattern finish for good grip in dry and wet conditions. Sizes: 8 / 9 / 10 /11, length: 33 cm.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Chlorinated and powder‑free disposable nitrile glove with excellent fingertip sensitivity and a fingertip grip pattern. Easy donning and doffing. Food approved and touchscreen compatible. Thickness: 0.11 mm / 2.36 Length: 240 mm Compliant with: EN 374‑1: Type B JKT, EN 374‑5: VIRUS
Slim fit tactical glove, 360° cut-resistant lining in Kevlar®. D3O® impact protection on the back of the hand and wrist. Flame retardant and water-repellent properties. High-quality goat leather with contact heat protection, Kevlar stitching yarn. Reinforcement between thumb and index finger. Touchscreen compatible (thumb and index finger) Extended cuff with cut-resistant lining Elastic wrist and forearm closure. Attachment loop for easy carrying on belt or gear Sizes: 6-13 Conforms: EN 388: 2422CP, EN 407: 41XXXX
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. Palm thickness: 28 mil/0.7mm According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016 EN 16350 - EN421
Highly cut-resistant glove in very fine knit, 0.85 mm. 18 gauge. Soft nitrile coating. Touchscreen on all fingers. Reinforced thumb cavity. Sizes: 6-12 Complies with EN388: 4X43F
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Knitted bleached cotton, fourchette style, hemmed edge, standard version, sizes 7-12. No PPE
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
Arm protector heat and cut resistant. Length 45 cm.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 410 mm Certified Category R/C. ATPV 25cal/cm²
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Seamless knitted glove (15 gg) with enhanced grip for wet and oily conditions, offering excellent dexterity and sensitivity. Featuring XLNT nitrile technology, food-grade, soft feel and a snug fit, with a tight and flexible cuff. Free of DMF, silicone, and natural latex. Oeko-Tex Standard 100. This FA (Food Adjusted) version is unprinted. Sizes: 6-11, Conforms to: EN388:2016 4.1.2.1.X, EN407: X.1.X.X.X.
White gloves made of light cotton. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
High quality red nitrile glove, 38 cm long and 0.425 mm thick. Solvex offers superior resistance to particularly hazardous applications in the chemical industry. Hence the success of this glove in the chemical, petroleum and paint industries, in relation to the transportation and processing of hazardous, corrosive substances and for working with detergents and solvents. Antistatic, silicone free.
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
The thinnest glove with cut protection level F, with the new advanced CRF® omni technology with a reinforced HPPE cut protection fibre. 21 gauge, with PU coating. Reinforcement between thumb and index finger and touchscreen functionality. Conforms to: EN ISO 21420:2020 - EN 388:2016+A1:2018 2.X.4.2.F
Protective overglove made of flame-resistant premium goatskin leather for electrical insulating gloves. Enhanced protection without compromising dexterity. For use with Class 00 ULW and Class 0 APC2 electrical gloves. Length: 255 mm Sizes: 7–12 Compliant with: EN388:2X21X
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
"Wonder Grip® Thermo" is an evolution of "Wonder Grip® Thermo Lite", with a doubled latex coating and a 10-gauge acrylic pile loop liner. The napped acrylic liner makes the hands feel warmer in cold conditions. Furthermore, "Wonder Grip® Thermo" can be used in a below-freezing environment. Sizes: 7(S) -11(XXL).
