BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back. Sizes: 6 to 12 Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Fully double latex coated glove, on a 13 gauge nylon lining. 100% waterproof. Superior grip. Sizes 7-11 Complies with: EN388:3141X
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
• 18 gauge gray Kyorene® Pro graphene liner • Black HCT®-Nitrile Nanofoam coating on the palm •Reinforced thumb hole • Touch screen • No stainless steel or fiberglass • Ergonomically shaped for a superior fit • Bacteriostatic kills harmful bacteria • Heat regulation keeps hands comfortable • Odor neutralization so that the gloves stay smelling fresh Conforms to: EN388:2016:4X42D
Nitrile gauntlet gloves, lined with Intercept™Cut Resistance Technology that provides ISO C cut protection. Nitrile barrier provides advanced chemical protection from many frequently used chemicals. With new Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort. Finished at top withstraight-cut opening. Antistatic and suitable to use in foor environments .
Ultra-light glove 21 gauge for unparalleled comfort and dexterity with very high cut protection (F).
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
The SHOWA 8005PF is designed for jobs requiring increased protection without compromising on comfort and tactility. A rolled cuff prevents dirt from entering the glove and allows for easy removal of the glove in case of puncture. The glove is ambidextrous and uses second-skin feel to significantly reduce hand fatigue over long periods of wear. Powder and latex free, food approved. Sizes: S(7)-XL(10).
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
Sturdy glove, for limited use, made of 100% nitrile with rolled cuff. Long version (30 cm), unpowdered and completely free of wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Supported blue natural rubber glove. Seamless made for comfortable wearing. Wrinkled finish on the hand for perfect grip in wet and dry conditions. Very smooth and very good dexterity. Ideal for use in the fishing industry, oyster fishing, cleaning, chemical cleaning, wet and dry use and general use with food.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
All-round gloves, made of water and oil resistant cowgrain leather. Electra plus has artery protection and a latex cuff. Sizes: 7 / 8 / 9 / 10 / 11.
Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.
Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Chemical resistant glove with multiple barriers. Innovative multi-layer polymer design with nitrile-neoprene-nitrile layers. Provides protection against a variety of chemicals from acids to bases to hydrocarbons and organic solvents. Featuring the latest Michrochem chemical barrier technology for superior protection in hazardous conditions. Inside of soft nylon lining for comfort and extra mechanical protection. Oeko-Tex standard 100- approved. Permeation time> 30 minutes for 13 of the 18 chemicals listed in EN ISO 374: 2016. Antistatic, latex and silicone free. Length: 35 cm, thickness 0.38 mm. Sizes: 6-11. Conforms: EN388: 2016 3.1.2.1.A, EN407: X.1.X.X.X.X, EN ISO 374-1: 2016 Type A: ACFGJKLMNOPST, EN ISO 374-5:2016
The first ultra-light weight HyFlex® style to combine a ¾ dip geometry, oil repellence and oil grip into a highly dexterous, high comfort glove. The HyFlex® 11-925 features Ansell’s proprietary grip technology providing reduced risk of slippage in dynamic environments. The liner is constructed with fine gauge nylon/spandex yarn providing the user with an unrestricted second skin feel. This unique blend of protection, performance and flexibility features bridges the gap from previous generations of ¾ dip oil repellent general purpose gloves, delivering enhanced flexibility, tactility, oil grip and extreme comfort.Sizes: 6- 11. In line with EN388 3.1.1.1.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
The ideal solution to mitigate static buildup when working with chemicals and liquids in environments with static hazards or high ex plosive risks. High performance Nitrile compound offers a far superior snag, puncture and abrasion protection. Reverse lozenge palm finisch for improved dry and wet grip. Foldable cuff gutter to prevent dripping on the forearm. Antistatic flocking layer for ease of donning/doffing and moisture management. Without Silicone. Sizes: 7-11.
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Extreme chemical protection: MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemicals. Approved for contact heat up to 100°C/212°F, antistatic according to EN 1149-3 standards and made without natural rubber or silicone, for protection against mechanical risks and allergic reactions. Comfortable unique manufacturing process and nylon liner support for more comfort during use
Unique combination of allergy prevention and comfort. The first industrial neoprene gloves for one-time use. Ideal solution to protect employees against type I allergies. Powder-free, for reduced chance of dermatitis. Excellent resistance to acids, bases and alcohols. Offer the same comfort as latex gloves. Polyurethane inner coating for easy donning.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.
Glove with PE and Zirnium. Extremely good cut resistance.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Cut resistant glove for medium weight applications requiring high level of performance in dry or slightly oily environments. 13 Gauge seamless knit liner of HPPE, Fiber glass, nylon, nylon, plyester, spandex with foamnitrile coating. The coating has an excellent abrasion resistance, and good level grip in dry and slightly oily environments. Sizes: 6-11.
Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
Thin airy working or inner glove, tight knit in cotton and spandex. Tight fit. Sizes: 6-10.
Padded winter glove with synthetic leather palm and polyester back. Reinforced fingertips. Fleece lining. Windproof and waterproof membrane. Good grip. Velcro closure. Touchscreen compatible. Sizes 7-12. Complies with: EN388:2016 1.1.2.1.X and EN511 X.2.X
Supple, comfortable and chemical resistant gloves made of butyl covered with a layer of Viton with smooth finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals, non-polar hydrocarbons and aromatics, halogenated hydrocargons, and oils and greases. Gastight and latex free. Lenght: 30cm, Thickness: 0.35mm. Sizes: 7-11.
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Blue microporous cryogenic SAFEGRIP glove lined with wool. Guard of 15cm in leather. Equipped with a Velcro closure at cuff. Thickness: 1mm. Length: 40cm.
Blue nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Blue powder-free nitrile glove for applications in food industry. Bio degradable. Package: per 100 gloves!
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.