BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Insole which emits heat for 7 hours after packaging is broken. Not PPE.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: yellow.
This Proflex back support belt in breathable Spandex (100% woven nylon) provides maximum support of the lower back and abdominal mus cles during lifting, hoisting and other strenuous tasks. Extremely supple version with patented V-shape and Sticky Finger support st rips on the inside to keep the belt perfectly in place while it is worn. Includes adjustable two-phase closure and removable, machin e washable shoulder straps. Sizes: S / M / L / XL / XXL.
Long winter cap (shoulder length) in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides. Flame-retardant properties.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
Adjustable one-piece traction device for shoes or boots delivers tenacious grip and stability. Rugged steel studs for tenacious grip and stability.
Ergonomically shaped knee protectors made of rubber with a foam rubber cushion. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
The perfect protection for sporadic and light kneeling situations. This knee pad is non-conductive, silicone-free and made of foam r ubber. Good resistance to oil-based products. Sizes: 36 cm x 53 cm x 2.5 cm. Other sizes are also available.
Supple back support belt made of woven nylon, for extra support of the abdomen and lower back. Fitted with a sturdy closure and support strips to keep the belt perfectly in place. Removable, machine washable shoulder straps.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: blue.
Ergonomically shaped knee protectors with an outer layer of plastic, a foam rubber cushion and a breathable lining. Comfortable mode l with excellent fit! The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 41 X 71 X 2,5cm. No PPE
Short winter cap in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides.
Knee protection for heavy work. The outer face reinforced with nylon provides protection against punctures. It resists cuts, tears a nd has a non-slip surface for better grip. One size fits all.
Compact knee pad with handle for easy carrying or storage. Colour: Orange. Dimensions: 20cm x 46 cm x 2.5 cm. Not PPE.
Cooling Towel: Dampen this synthetic chamois to create a cooling aid significantly colder than ambient air. Advanced PVA material holds water without feeling heavy. Super-evaporative, feels significantly cooler than ambient air.
Elbow band for work that results in long periods of elbow strain. This band spreads the pressure on the muscle attachment point over the larger muscle mass of the lower arm, which reduces development of pain. Prevents stress-related injuries of the arms. Sizes: S / M / L / XL.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 50 inches. Material: Rubber.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for bette r comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surfa ce. Sizes: universal size.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
This PCM CoolOver provides a constant cooling temperature of 21°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Improve feeling of comfort and energy whilst standing at work. Ideal for any workplace where hygiene is important e.g. healthcare, food manufacturing, catering, hospitality, clean rooms or food retail. Made from a revolutionary ‘gel foam’ material that combines the best in durability and comfort. Material also has anti-microbial properties Closed cell construction means that no liquids can penetrate the mat and reduce performance. Easily cleaned – can be cleaned with detergent or can be steam sterilised. Fire tested to BS EN 13501-1 and slip tested to DIN 51130. Dimensions: 0.6m x 0.9m. Bigger dimensions available on request. Colour: Black.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 46 X 91 X 2,5cm. No PPE
Vibration absorbent gloves made of pigskin leather with breathable Spandex® and PVC shell for extra protection of the back of the ha nd. Provides excellent vibration and shock absorption due to patented NU202 polymer. With breathable backside, elastic collar and re inforced fingertips for longer service life. Colours: black with high-viz accents.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 42 inches. Material: Rubber.
Cooling vest based on PCM technology to reduce heat stress and fatigue occur in very hot areas. Provides constant cooling at 3 different temperatures. Exterior: Robust canvas material, polyester mesh lining. 4 pockets for cooling packs. adjustable waist, zipper. Supplied without cooling packs. Available sizes: S-3XL. Available color: black.
Comfortable padded tool belt for easy rig support. Thick, vented foam padding for comfort, double tongue metal roller buckle, grommets set firmly for durability, suspender anchors.
This PCM CoolOver provides a constant cooling temperature of 24°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
"Ice" at a constant temperature of 15˚C. These extra cold 15˚C cool packs are mainly used for pre-post cooling of athletes and to cool down after an injury or after medical treatment. Or for someone who just really likes a low temperature cooling on the body. th only REACH registered and USDA certified 100% bio PCM on the market!
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 90 inches. Material: Rubber.
Electrical insulation mat, in line with: BS EN1111:2009. Protects against electrical shock, ideal for use for switchboards and equipment under high voltage. Ribbed surface provides traction under the feet. Resistant to acids, oil and low temperatures. With colour coded tape on rear to indicate classification. Thickness 3mm category 0 resistant to 1Kv. Supplied per running metre.
Pull-on wrist lanyard with carabiner connection thethers tools limiting the distance of a dropped tool and reduces snag hazards. One size, fits all. Maximum safe working capacity: 1,4kg. No PPE.
The SnareIt™ no touch hand safety tool eliminates finger and hand exposure to the danger zone while safely maneuvering pipe or other like cylindrical-shaped equipment. Loop diameter: 0 to 15 inches.
Evaporative Hard Hat pad with cooling towel.Advanced PVA material activates easily and quickly when run under water for one minute.Hook and loop closures connect to hard hat suspension system.Conveniently attaches to hard hat suspension headband .Reusable, just re-wet. No PPE.
Set of 4 cooling packs with a constant temperature of 24 °C. These 100% biobased INUTEQ‑PAC® PCM packs perform reliably under any extreme temperature and at any humidity level. For the Bodycool Pro cooling vest (1052092).
Flip-Top winter gloves with optimal dexterity with removable fingertips.
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
Half ice-grip overshoe made of supple, stretchable rubber for simple attachment over safety shoes. The sturdy metal studs provide a firm, powerful grip and stability on snow and ice. Can be used in temperatures to -40°C.
KneeBlades are designed for any job where you are required to be on your knees. The high-quality KneeBlades allow for more balance, flexibility, and mobility. The three-wheeled mobile base allows for full 360° turning capability, without lifting from the floor. Close to the ground knee roller design minimizes back stress. With the push of a button, you can go from Knee Blade to knee pad. - Tapered Gel Pad designed to evenly displace weight and lessen pressure on the knee, while fitting the contour of the knee; - Hook And Loop (One Strap) to secure the rolling knee pads comfortably with less tension on the back of your knee; - Durable, lightweight nylon for the most demanding projects Each blade weighs only 3.5 lbs KneeBlades Are Ideal For: Installing Tile Installing Wood Floors Installing Carpet Concrete <(>&<)> Masonry Work Painting Low Places Construction Work Auto Detailing <(>&<)> Maintenance Stocking Shelves Yard <(>&<)> Gardening Clean-Up
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: Rubber.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: Rubber. D-handle.
Stretchable nylon rope for attachment of tools, to prevent accidents caused by falling tools. The rope has an aluminium snap hook and adjustable loop. Length: 0.89 m - 1.1 m.
• Effective anti-fatigue mat available in two options :- 1. Bubblemat (100% natural rubber) 2. Bubblemat Nitrile (75% natural rubber / 25 % nitrile) • The addition of nitrile provides excellent resistance to oils and chemicals. • Both options feature a raised bubbled surface to stimulate blood circulation. • Available as complete mats or interlocking sections for longer runs.
MAT COBA ELITE DIAMOND 0,9Mx1,2M: - Improve comfort when standing in the workplace. - Premium quality ‘diamond’ surface anti-fatigue mat. - Superior material ensures durability. - Ramped edges help avoid creating a trip risk. - Supplied with high visibility yellow borders as standard. - Loose lay – can easily be installed in a wide array of workplaces. - Supplied as individual workstation mats. - Fire tested to BS EN 13501-1 Class Bfl – s1
This PCM CoolOver provides a constant cooling temperature of 29°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Evaporative Cooling Vest: Soak in cold water, and enjoy cooling relief and comfort. With V-neck with zipper closure, nylon outer layer, polymer-embedded fabric inside, water-repellent liner and black cotton- poly elastic trim. Washable.
The N-Ferno® 6860 Winter Hard Hat Liner has 2 layers of insulation with a FR modacrylic/cotton blend shell and a soft polyester fleece lining for exceptional warmth. This lightweight thermal liner is chin-length to keep head and ears covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant.
Stretchable nylon rope for attachment of tools, to prevent accidentscaused by falling tools. The rope has an aluminium snap hook and adjustable loop. Length: 107 cm - 107cm.
• An affordable anti-fatigue mat for the workshop• Raised circular shape for excellent slip resistance• In line with slip resistance test EN13552 Category R10• Openings for the drainage of spilled liquids• Made of durable NBR rubber• Sloping edges reduce trip hazard• Product height: 10 mm
The ProFlex® 365 Mini Kneeling Pad is the perfect size kneeling cushion for workers who are frequently dropping to one knee. The convenient 4 in. x 6 in. x 1in. (10cm. x 15cm. x 2.5cm.) size is lightweight and has a handle to attach belt loops, keychains or toolboxes with either a grabber clip or carabiner for easy access.
Elbow brace with: Perforated neoprene; Spandex mesh in elbow crease; Binding and pre-curve design; Adjustable hook and loop strap. Available sizes: S-2XL.
Ergonomically shaped long knee protectors made of rubber with a hard gel pad. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
This PCM CoolOver provides a constant cooling temperature of 15°C. The CoolOver is specially designed to improve performance and speed up recovery after exercise.
Hygimat holds liquid disinfectant for effective cleaning of footwear at entrances. Made from 100% recycled REACH-compliant PVC material. Specially designed flexible scrapers remove dirt and allow footwear to immerse in disinfectant. Suitable for any location where hygiene is important such as farm buildings, abattoirs, and food processing factories. 1.75 ltr recommended disinfectant volume. For example with diluted umonium (art. 1047969). Dimensions: 0,55m*0,80m.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 21 inches. Material: Rubber.
Chill-Its 6689 Cooling Long Sleeve Sun Shirt with UV Protection. Available sizes: S - 3XL Available colours: Blue, lime
This PCM CoolOver provides a constant cooling temperature of 6.5°C. The CoolOver is specially designed to improve performance and speed up recovery after exertion.
Anti-fatigue mat in hardened rubber, anti-slip and equipped with opening, finished on the sides. Dimensions 0.9 x 1.5 m. Colour: black.
Knee sleeve with open patella and spiral stays. Contoured precurve design conforms to the body's natural shape. Spiral stays for added support and stability. Sizes: S/M/L/XL/2XL. No PPE.
Set of 4 cooling packs at a constant temperature of 29˚C. These 100% biobased INUTEQ-PAC® PCM packs perform under any extreme temperature and at every level of humidity. For the Bodycool Pro cooling vest (1052092).
The Squids® 3132 Scanner Lanyard Harness keeps barcode scanners secure and accessible during warehouse and distribution work. With its ambidextrous design, the industrialgrade harness maintains a comfortable fit for both right- and left-handed workers while keeping scanners ready for use. Two small loop attachments connect to captive holes built into the scanners, allowing them to hang comfortably on the hip when not in use and preventing damage or injury caused by drops. Can be combined with holster (art. 1054143).
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: plastic.
Set of 4 cooling packs at a constant temperature of 24˚C. These 100% biobased INUTEQ-PAC® PCM packs perform under any extreme temperature and at every level of humidity. For the Bodycool Pro cooling vest (1052092).
Double Strap Wrist Support for left hand with Open Center Stay™: Supports wrist during repetitive motion discomfort by limiting wrist movements.
