BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 500.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Full set with Speedglass Heavy duty welding helmet G5-01 with welding filter G5-01/03VC, adflo motor unit for high altitudes, and carrying bag. Not suitable for use in confined spaces. The large clear visor (104x170mm) is curved and provides excellent visibility in all directions. The welding filter's natural color technology provides a lighter, more detailed and colorful view, and switches on/off automatically. The airflow is adjustable on the face, visor or anywhere in between. The helmet's slim profile and ergonomic design makes it even lighter and easier to work in tight spaces.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, standard nylon belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Motor unit Clean Air for suit RJS, including battery, hose, and belt. Filters and battery charger to be ordered separately.
Intrinsially safe motorunit specially designed to be used in potential explosive atmospher, to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Comes with: motorunit, battery, charger ,belt, filter adaptors for P3 filters, set P3 filters, 10 pre filters, filter cover caps, tube vaseline, and flow meter.Not for confined spaces. Flow rate: min. 175 or 225 L/min. .Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Motor unit that is worn on the back of the head, for connection with a half or full face mask. Max. air flow: 230l/min. Weight: 450g. Internal battery charging time <(><<)> 2h (up to 95%). Up to 2 hours of deployment time possible. Contents: motor unit, battery, battery charger, carrying case, 2x neck support, quickstart user guide, cleanspace smart app. Filters and mask need to be ordered separately.
The CleanSpace WORK Kit consists of the following items: • 1 x CleanSpace WORK half mask (including fabric head harness) size Medium • 1 x CleanSpace WORK power system: o 1 x CS3001WORK power unit o 1 x CS3009WORK (small) neck support o 1 x CS3010WORK (medium) neck support o 1 x CS3002WORK particulate standard TM3 P3 filter o 1 x CS3008 head harness o 1 x PAF-1101 battery charger o 1 x CS3032 carry bag o 1 x Quick start guide
Complete kit with SR 500 fan unit and protective helmet SR 575 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Very sturdy motor unit in impact-resistant plastic to be combined with head covers. To be used with 2 dust and/or gas filters with standard DIN 148 thread; these filters can also be used on half-face and full-face masks. Class 2 gas filters work as class 1 filters when used with these units, max. concentration is therefore 0.1%. Device is equipped with a low-flow alarm and electronics for maintenance. Not for confined spaces. Battery life: approx. 7-15 hours. Flow Rate: min. 160 L/min. Weight: 1.4 kg. NPF: dependent on the mask used. Included : battery, charger and comfort belt.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 TW, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 VC, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
The CleanSpace CS3000WORK includes the following components: • 1 x CS3001WORK Motorized System • 1 x CS3009WORK Neck Support (Small) • 1 x CS3010WORK Neck Support (Medium) • 1 x CS3002WORK Standard TM3 P3 Particulate Filter • 1 x CS3008 Head Harness • 1 x PAF-1101 Battery Charger • 1 x CS3032 Carrying Bag • 1 x Quick Start Guide Does not come with a mask or fabric head harness.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01/03TW, Adflo particle filter, adflo motor unit and carrying case and consumables.
Motor unit that is worn on the back of the head, for connection with a half or full face mask. Max. air flow: 230l/min. Weight: 450g. Internal battery charging time < 2h (up to 95%). Up to 2 hours of deployment time possible. IP65. Contents: motor unit, battery, battery charger, carrying case, 2x neck support, quickstart user guide, cleanspace smart app. Filters and mask need to be ordered separately.
Complete set including ergonomic motor unit and welding mask with automatic welding lens, grinding cap and safety helmet. Not for use in closed areas. Set consists of motor unit, battery, charger, air hose, pre-filter, dust filter and welding helmet and transportation bag 790101. Welding helmet with automatically darkening lens 9100XXi (73 x 107 mm), tint adjustable from 5-13. Sensitivity and colouration speed can be adjusted. Battery life: approx. 8 h, when used with dust filters. Flow rate: 170-200 L/min. Weight of motor unit: 1.16 kg, welding helmet: approx. 750 g. NPF: 500.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, M-206 hood, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(><)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.
Ergonomically shaped with clear full colour LED display. Uses 3 standard thread filters (only approved with RSG filters); autonomy to max. 8 hours. With visual vibration and audible alarm for low flow or saturation of dust filter. Air flow can be set. IP65 approved for decontamination under the shower. To be combined with all air hoods from the T-air series with hose 1035014, or with full face mask 500E together with hose 1046652. NPF: depends on the mask used.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters and designed for welding applications. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, spark arrestor, flow meter, battery and charger, P filter and pack of prefilters. NPF: Depends on hood used.
Kit with ABE1 filter and Li-ion battery. Filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. Class 1 gas filter: for max. concentration of 0.1%.
Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.
SR500 motorunit with PVC belt drive to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, easy to clean PVC belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
