BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Arc-Flash earflap for V-GARD 900.
Rainjacket in 100% polyester 300D with PU coating (190g/m²). Zip closure under flap with press-studs, 2 front pockets, radio loop, detachable hood in collar, reflective striping, removable fleece (260g/m²). Available sizes: S-3XL. Available colours: navy. Conforme à: EN 343 3.1.
The inner cover plate is designed to protect the inside surface of the filter from spark and spatter. Can be used to increase +2 dark shades of the welding filter.
Replacement inside protection plates with plus 1 shade leve
Silver front against heat for Speedglas 9002.
Heavy duty safe bucket with 6 built in connection points. Cotton duck canvas suitable for harsh work environments. Carabiner and hoistring strap, puncture resistant plating sewn into the base of the bucket. No PPE.
Warm, insulating gloves with RIPEL™ technology provide fully water-proof gloves. Leading dexterity among liquid-proof cold weather gloves. PVC-foam coating stays flexible down to -25°C, food approved.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
Disposable cover for motorunit Proflow.No PPE.
Chest protection for combat training. Sizes: M/L and L/XL.
The C50 protective mask provides maximum operational flexibility to counter mulitple threat scenarios, including chemical, nuclear and radiological agents. It offers high protection outstanding field of vision, and superior comfort. NOT for industrial or civil use.
Clean water tank 1000L.
Hose 1m to connect 8 bar regulator with MFC inflatable shower or tent.
Low, black shoe made out of full grain leather. Special antislip sole made out of rubber. Removable insole made out of PU for higher comfort. Sizes: 35-42. No PPE.
Cleanspace combined filter A1P3. Suitable for protection against airborne particulate (dust, mists and fumes), organic gases or vapours (boiling point >65°C). Weight: 220g. In line with EN12942
Covered zipper, 2 spacious inset side pockets, spacious chest pocket with zipper on the side, 2 large back pockets of which 1 with flap, loose hanging ruler pocket with extra tool pockets, spacious loose hanging thigh pocket with flap and extra storage options through integrated phone pocket and extra tool pockets, easy accessible Cordura® knee pockets with opening at the top closable with flap and Velcro, preformed trouser legs for a very good fit, Cordura® reinforcements and triple stitched seams in vulnerable places for an extra long life span, adjustable hammer loop thanks to push stud, very strong breathable stretch fabric (polyamide/Lycra) at the back of the knee for optimum wearing comfort, adjustable shoulder straps with elastic, crotch gusset to prevent tearing, 1 D-ring for badge holder, reflective piping. Quality: 65%/35% polyester/cotton, hopsack, 260 gr/m2. Available colors: navy, white/charcoal grey, black/charcoal grey, sand/charcoal grey, forestry green/charcoal grey, charcoal grey. Available sizes: Available sizes 44-66, Available size ups 49-57, Waist sizes 24-29.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip4 Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Synthetic leather glove, Unlined, 0,7 mm, Microthan®+, Diamond grip pattern, Nylon, Cat. II, Black, grey, yellow, Chrome free, Reinforced seams, Velcro®, for assembly work . Conform EN 388:2016: 2.1.2.1.X
- All sizes comply with EN ISO 20 471 - Suspender trousers with raised back - Suspender trousers 2 layers + fully lined - Wide loom band - Closing the sides by means of invisible push buttons - Fly with zipper - 2 side pockets on the front with +/- vertical insertion - 1 stitched back pocket with flap closing by means of velcro's (H14xB16cm) - Bite bag with flap closing by means of velcro's - Closing the meter pocket with the flap using velcro - 2 reflection bands per pipe - 1 reflection band on waist front and back - 2 knee pockets with flap closing through velcro's Quality: PES 100% + GORE PYRAD®. Available colors: Fluo yellow / navy. Available sizes: BE 40 - BE 60.
Velcro for speedglas 9100FX/9100FX AIR hoods. No PPE.
This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.
Innovative design with ergonomical earplugs, guarantees fixed position on head / in ear, therefore blocking out all noise. Weight: just 4 grams. Available in package containing 10 individually boxed pieces.
Safety glasses in blue polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (34g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With anti-scratch/anti-fog characteristics.
The hooded ladies sweater has two pockets. These pockets can be closed with a zipper. The inside of the sweater is gebrusht several times for extra comfort and warmth. The advantage of the hooded sweater is that it provides additional protection through the hood on cold days. Quality: 80% cotton / 20% Polyester. Available sizes: XS-XL. Available colors: Navy, Black, Gray, Bordeaux.
Beanie in single jersey with matching flatlock stitching. Quality: 95% Cotton 5% Spandex (Black). 60 % polyester, 33 % cotton, 7% Spandex (yellow/orange). Available sizes: Universal. Available colours: Skyblue, forestgreen, black, navy, orange, yellow/navy, grey and red.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrilfoam coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: HPPE. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Testgas HCN 10PPM cylinder 34L. Only for use in combination with pressure reducer.
Compress, 7cmx500cm, 100 cotton.
Testgas H2S 25PPM aluminium cylinder 34L in N2.
The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05" (1.3mm) to ½" (12.5mm). Features: Approved to the ANSI/ISEA 121-2018 standard; Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply; Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue; ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions; Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Davit arm with a range of 720 mm, high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
U-shaped base for Davit arm. Width adjustable from 1,2m - 1,9m.
5-part large Davit arm system, high capacity, suitable for confined spaces. Includes adapter for mounting Lier Advanced. May be used for both persons and, to a limited extent, for loads. Base width: 1927-2613mm, Davit arm height: 2223-2805mm. Capacity: fall arrest 2 users (max 140 kg each), rescue: 1 user (max 140 kg), max load weight: 205 kg. Complies with: EN3795 type B, EN1496 class B
Davit arm with boom. Davitarm and base system includes adjustable upper mast, lightweight lower mast and 3-piece lightweight base. Includes mounting bracket for a winch. Order winch and SRL separately. Boom has a universal anchor point for fall-blocks or safety line. In combination with the adapters, fall-protection blocks with or without winch or permanent winches, can also be mounted to the davit. Boom has two roller wheels to guide cable of fall-protection block or winch. The boom is extendible in different positions. Height with boom: max. 2542 mm.
The 3M™ Peltor™ LiteCom is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32 dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Bodytrousers in 65% cotton / 35% polyester, concealed zip, 2 side pockets, breast pocket with flap, 2 back pockets, ruler pocket, Cordura® reinforcements, adjustable waistband, hammer loop, D-ring, reflective details, Cordura® knee pockets, adjustable shoulder straps with Velcro. Available sizes: 44-66. Available colors: Navy, gray and black / gray.
Floor foot for Davit arm to be secured to concrete structures. The flat design ensures that there is no danger of stumbling. When used together with davit arm, complies to EN795 type A, EN1496 Class B
No PPE.
Adaptor to connect short davit arm with old fixed base No PPE.
Counterweight base high capacity with cart, as base for davit arm.
This brace gives a light support and unloading of the patellar tendon. Sizes: Universal. Colors: Black.
Cleanspace combined filter ABEK1P3 for protection against airborne particulate (dust, mists, and fumes), organic, inorganic gases or vapours, solvents, (boiling point >65°C). Weight: 200g In line with EN12942
Short work trousers RWS, 80% polyester / 20% cotton, 280 gr / m2. Available sizes: 42-64. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 20471: 2013 / Class 1.
