BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Stainless steel safety knife, NSF certified, metal detectable. Highest cutting level with integrated blade. Blades are replaceable. Consists of 100% stainless steel and is easy to clean. Suitable for left and right-handers. Cuts plastic, paper bags, tape, strapping tapes, foils, 1-ply cardboard. Replacement blade: 1052578
Modern, fitted bicolor lady t-shirt with ribbed neck in four layers and elastane in the hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. The fabric is ring-spun and post-treated with an enzyme wash, making the material pre-shrunk and soft to the touch. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 180 g/m². Available sizes: XS-2XL. Available colors: BLUE/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
Bicolor lady sweat jacket with contrasting zip on the front and on the side pockets. Contrasting neck tape. 2x2 rib with elastane at the bottom hem and at the cuffs. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. These can be replaced by one of the other available colors if desired. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 280g/m². Available sizes: XS-2XL. Available colors: Blue/Navy, Navy/Blue, Black/Orange, Black/Red, Black/Grey and Gray/Black.
Spare part for motorunit TR-800.
Magnifying welding glass for Speedglas G5-02 series.
Complete work lamp for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01, including light, protective glass, cable / mounting parts and a long cable. No PPE.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Fleece jacket Durango: Straight collar, Zip closure with chin protection, 1 inset chest pocket with zip closure, 2 inset pockets with zip closure, Round sleeves. Available sizes: XS-5XL. Available colours: Black/red, black/grey, black/blue and black/green.
Hi-vis rain trousers Batur: Narrowing at leg end by means of press studs; Elastic waist. Quality: 100% polyester knit with PU coating; ± 170 gsm. Available sizes: S-3XL. Available colours: Fluo orange. In accordance with: EN 343 4:1 and EN ISO 20471 class 1.
Comfortable winter bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Protective full face visor for Kask helmets Plasma. Easy to install. Sratch- and fog-resistant.
Fully automatic blade retraction in a robust handle in aluminium, for left- and right- handed persons. Simple and safe blade replacement. Blade can be used on both sides. Cutting depht: 17mm. Replacement blades: 60099 (1021313). No PPE.
Storage bag for KASK helmets. No PPE.
Anti-fog spray (100ml) with microfiber wipes. You can use the kit 2000 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Air duct breathing hose for Speedglas Heavy Duty helmet G5-01. No PPE.
Cap B010 with adjustable size for a perfect fit. Quality: 65% PES, 35% Cotton 190g/m².
Circular work sock. The comfortable terry footbed provides optimal comfort. You don’t feel the toe seam. The reinforced heel and toe are added for protection and longer lifetime. Composition: 39% Recycled cotton, 31% Recycled polyester, 24% Polyamide, 6% Elastane. Sizes: 35/38, 39/42, 43/46, 47/50.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted.
Safety glasses with CSP polycarbonat lenses and orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Belt in black leather. Adjustable to max 115cm.
High shoe in velours microfiber. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
TYVEK® IsoClean® coverall IC 183 B WH DS with collar. Bounded seams, bounded neck, raglan sleeves. Covered elastic wrists and ankles. White. Available sizes: S - 3XL For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILIZED
Device for practicing the use of the self-rescuer M20.2 Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Extra mouthpieces available as an accessory.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
Charger as accessory for motor unit Clean air Chemical.
Output for 2 persons / compressed air hoses to be installed on Sundström filter system.
Duolens glasses with modern fashion-look and extra eyebrow protection. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Temples are made from 65% recycled material. Anti-slip material on the temples consists of 47% recycled material (PCR). Eq uipped with clear polycarbonate lenses consisting of 71.5% mass balanced polycarbonate. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: grey/light grey. PCF (Product Carbon Footprint) = 0,10kg CO².
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
A handy flashing light for professionals, security personnel and do-it-yourselfers. It can be easily attached at any time with a clip or magnet, e.g. to work clothes, caps or metal surfaces. The superior Ledlenser light quality ensures precise illumination in two different brightness levels. With its 360° swivel joint and rotating lamp head, the W1R Work provides light exactly where it is needed. The integrated battery can be charged quickly and easily via USB-C. Other features include a bubble surface for a firm grip, a convenient transport lock and a low battery warning function.
Wall mounted eye shower with two 45° angled heads, incl. 1.5m inlet hose. Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (14 l/min). Min. working pressure: 1,5 bar.
Gloves with high cut resistance and PU coating. 18 gauge. Very thin knit, 0.7 mm. Touchscreen. Reinforced thumb cavity. Sizes 6-12. Complies with: EN388:2016: 3X43F
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: ethylene oxide. Shelf life: 18 months in sealed packaging. Does not produce alarm.
For strong to very strong soiling involving substances such as soot, graphite, metal dust, lubricants. With special solvent and Astopon® (refined walnut shell flour) and skin-protecting component Eucornol®. Skin-friendly pH-value Content: tube of 250ml PPE category: not applicable Previous name: Kresto
Protective film for safety goggles Ultravision 9301.
Glass replacement lens for shot blasting helmet Panorama. Serves as the basic lens.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 45x93mm. Battery life: 2800 hours.
Replacement filter for Adflo odour filter. Odour filter that removes unpleasant odours. Does not provide protection from gases or va pours, only improves comfort. If gas filters are already being used, it is unnecessary to use an odour filter. Can be used in combin ation with Adflo odour filter.
Sweat band for hoods from S-600 and S-700 series, and for S-950.
Lightweight breathing hood made of WEB 22 with PC visor. WEB 22 material captures particles, preventing the particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Protection around the neck in flame retardant fabric with zipper closure at the top for easy connection to the Fleece helmet liner.
Aspivenin is handy in the event of bites, by insects or even reptiles. If is useful if the bite involves an animal that injects a liquid (toxin) under the skin.
High shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
This thermometer is capable of recording body temperatures between 32º and 42.9º. It also features an alarm function that alerts in case of fever (if the patient's temperature is equal to or higher than 38º.) Technical details: - Dimensions: 153x88x45 mm - Weight: 122 grams (without battery) - Stable, high-precision infrared sensor - Adaptability to the room temperature - Ability to store 32 temperature records - Unit of measurement: Celsius and Fahrenheit degrees - Automatic shutdown function for energy saving - Large LCD display with high definition tricolour backlight (green for normal temperature, yellow for warm temperature, red for fever temperature).
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Stylish ladies hi-vis softshell: Breathable, windproof and water-resistant fabric; Lightweight flexible interrupted HiVisTex Pro reflective striping for high visibility; side pockets with zip; Concealed telephone pocket; Ezee Zip; Adjustable drawstring in the hem. Quality: 94% Polyester, 6% Elastane, 160gr laminated to 100% Polyester Micro Polar Fleece 150gr 310g. Available sizes: XS-2XL. Available colours: Fluo yellow/black. Complies with: EN ISO 20471 Class 2.
Fabric neck protection, recommended accessory for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. Can be used if a fabric neck protector is preferred or if the standard version constantly touches the chest when welding in downward looking position.
Comprehensive protection kit including shoulder cover and large head cover for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01.
Adapter for ZEN visors to attach onto Zenith helmets. No PPE.
Low shoe in suede with 200J aluminium toecap and non-metallic anti-perforation sole. Sole in PU/TPU and Sanydry lining. Insole ECO-T ECH POLY-GREEN. Sizes: 38-48.
Post with diameter 48mm, height 3.5m with ground anchor, for mounting windsock.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 VC, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Softshell ladies Havep shift, model 40236.
Covid-19 self-test Hightop. The Hightop corona rapid test is suitable for the qualitative detection of the coronavirus in nasal swab samples. You can easily perform this test yourself using a short nasal swab. The sample is mixed with an extraction liquid and then placed on the test cassette; you will receive the test result within 15 minutes.
Comfortable stretch softshell jacket with pliable pile fleece lining. A soft windproof and water-repellent stretch jacket with reinforcements at exposed parts and detachable hood.
Functional and durable winter jacket with reinforcements on yoke, sleeves and at front. Made of a water and windproof material with breathing capability. Detachable hood.
Sustainable high-vis craftsman stretch trousers. Made of 4-way stretch from bio-based and recycled materials and equipped with stretch panels at the waist for outstanding comfort.
High vis sweatshirt made of soft recycled material. A classic crew neck sweatshirt with stretch reflective transfers.
The JALBAMBOU from Jallatte is a high safety shoe with Recycled Putek® PLUS upper, J-ENERGY Biomass Balance sole with Infinergy® from BASF, ESD/Dissipative and aluminium safety toe cap type B and non-metallic anti-perforation protection Sizes: 35-48 Compliant with: EN ISO 20345:2022
The JALLLORD from the J-ROYAL range from Jallatte is a low safety shoe with an immediate shaft made of water-repellent grain leather, J-ENERGY Biomass Balance sole with Infinergy® from BASF, ESD/Dissipative and aluminium safety nose type B and non-metallic anti-perforation protection S 35-48 Conforms to: EN ISO 20345:2022
The CleanSpace CS3000WORK includes the following components: • 1 x CS3001WORK Motorized System • 1 x CS3009WORK Neck Support (Small) • 1 x CS3010WORK Neck Support (Medium) • 1 x CS3002WORK Standard TM3 P3 Particulate Filter • 1 x CS3008 Head Harness • 1 x PAF-1101 Battery Charger • 1 x CS3032 Carrying Bag • 1 x Quick Start Guide Does not come with a mask or fabric head harness.
Winter glove, outer layer in polyester, 13 gauge. Waterproof membrane. Polyacrylic lining. Nitrile foam coating. Touchscreen. Oekotex certified. Sizes: 7 to 11 Conform: EN388:2016: 3.X.2.1.C EN511: 1.2.1
Comfortable TPE half mask, with replaceable low profile ABEK1P3 filters. Protects against most organic and inorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives, toxic dust, mist and smoke particles, and micro-organisms. Replacement filter: 1061777
The allround Bodycool Pro Neoprene cooling vest provides constant cooling and ultimate protection against heat stress for professionals working in extreme heat, especially when they need to wear protective, air-tight clothing. One size. Note: INUTEQ-PAC® bio-based PCM cooling inserts must be ordered separately. (15°C: 1063843, 21°C: 1063844, 24°C: 1063845, 29°C: 1063846)
