BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Cut and heat resistant arm protector 60 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Flam retardant version. No PPE.
Suspension I/79G-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ber. Not separately certified as PPE.
This jacket is equipped with knitted wind cuffs in the sleeves, two pockets on the inside and two pockets on the outside. The sleeves are removable and this jacket can be fitted with a hood. The breathable, water-repellent outer fabric and moisture-absorbing coating on the inside protect you from wet weather conditions. Available colors: Hi-Vis yellow/Navy and hi-vis orange/navy. Available sizes: S – 4XL.
The micropore nitrile palm coating is designed to deliver excellent grip, in both dry and oily conditions. With 360 degrees breathability, hands will be comfortable and free from irritation. EN388: 2016 level E cut resistance Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 3 E; Fine 15 gauge lightweight liner; Increased abrasion resistance to level 4 for 2021; High level of tactility and dexterity; Approved for food contact to EU Regulation 10/2011; Touch screen compatible; Breathable liner and palm coating; New micropore nitrile palm delivers good dry and oil grip; Antistatic to EN1149-5: 2008.
Kevlar work trousers with concealed zipper, 2 back pockets with snap button, thigh pocket with flap and cell phone pocket, ruler pocket with tool loops, Cordura® knee pockets, hammer loop, Kevlar® thigh reinforcement, reflective piping. Quality: 65% / 35% cotton / polyester, canvas, 320 gr / m2. Available sizes: 44-66, 47-57. Available colors: Black / gray.
Safety goggles for use in IPL applications (Intense Pulsed Light) with pressure-free fit and innovative temples with flex technology. Very light, fits over most prescription glasses. Wide field of view. Protection level 5.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch coating. Marking: 2C-1.2 1 FT K.
Trousers with elasticated velvet belt, internal drawstring, 2 side pockets. COOLTEX breathable and moisture absorbing fabric! Quality: Polyester 50% / cotton 50%, 215gr / m². Available sizes: 0-6. Available colors: white and gray.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Chainsaw bib-and-brace in 65% polyester / 35% cotton (85g / m²). 6 layers cut-resistant protection. Fly with zip, 2 inset pockets 1 patch pocket for pleat and system for attaching the spark plug key, Zipper and button on the right side, Elastic waistband on the back, 2 adjustable elastic braces with buckle, Chest top with pocket with vertical zipper on the right side and 3-needle stitching on the back. Available color: gray / orange. Available sizes: S-4XL. Compliant with: EN 381-5 class 1.
Hoody with 2x2 rib with elastane on the bottom hem and on the cuffs. The stoppers of the drawstrings are in a contrasting color. Quality: 60% cotton, 40% polyester, 280 g / m2. Available sizes: S-5XL. Available colors: White, navy, dark gray, light gray, green, red and black.
T-shirt with long sleeves and high visibility with stretch reflection tape for extra freedom of movement. Made from a soft and comfortable material with cotton on the inside. Removes perspiration, dries quickly and offers UV protection. Contrast areas where the T-shirt is most exposed to dirt. Color: Hi-Vis yellow / navy blue and hi-vis yellow / black. Material: 55% cotton, 45% polyester. Weight: 190 g / m².
Compress, suitable for dressing a leg or arm wound. Dimensions: 12X14CM.
Safety glasses with grey polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft materials around the earbranches for reducing the pressure.
Skilled Classic 400 is a knee-high, technically constructed sock that uses flat-knit, terry-knit and supportive knitting to get the best fit, insulation and comfort. Cleverly placed flat-knit panels also reduce the risk of blisters. Merino wool 64%, Polyamide 35%, Elastane 1%. Sizes: 36/39, 40/44, 45/48. No PPE.
Ladies' Long john in 80% merino wool / 20% polyamide (200g / m²). 1x1 rib knit, good thermal protection and breathability, made from longitudinal seams for a comfortable feel, elastic waistband. Washable at 60 °. Available sizes: XS-XL. Available colors: Black, blue and green.
Salvequick Blue Detectable Finger Bandage are extra long blue plasters that are easy to wind around your finger. Soft and flexible, detectable by most metal detectors used in the food industry. Dimensions: 120 x 20 mm CONTENT: Each refill contains 30 plasters, 6 refills/box.
First-aid kit Medi Multi Yellow without filling incl. Wall bracket. Dimensions: 32 x 22 x 13 cm.
Backpack 100% made of cotton with two compartments. The main compartment has an inside pocket for MP3/Ipods and a grommet for earphones. Extra compartments available for pens or phones, together with two draw strings on the side. Content: 26 liters. Measurement: 30 x 43 x 22 cm. Available colors: black, blue and red.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Polo piqué with three-button placket, neck ribbon, side slits and ribbed cuffs. Quality: 60% cotton, 40% polyester, 200 g / m². Available sizes: S-5XL. Available colors: White, dark gray, red, navy, blue, green, black and dark gray.
Stretch shorts: • stretch material on the seat, crotch and inner thighs; • two leg pockets with zip; • two back pockets with flaps; • hidden button. Quality: 65% polyester / 35% cotton, 245 g / m². Available colors: Black, Navy, Light Blue, Red, Green and Gray. Available sizes: C44 - C62 EU.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
The SnareIt™ no touch hand safety tool eliminates finger and hand exposure to the danger zone while safely maneuvering pipe or other like cylindrical-shaped equipment. Loop diameter: 0 to 15 inches.
Hi vis softshell in a breathable and waterproof fabric with PU membrane. 2 side pockets, 1 chest pocket, 1 inside pocket and 1 sleeve pocket. Pulling cord, adjustable cuffs and fixed hood. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Metal detectabel cutter, easy to clean, for left- and righthanded. Enclosed blade. Ideal for cutting straps, plastic bags, shrink wrap, paper bags. Disposable cutter, no replaceable blades. No PPE.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Cederroth Wound Care Dispenser. Everything you should need to deal with minor wounds in a practical dispenser. Contains Soft Foam Bandage Blue, a self-adherent, adhesive-free plaster that stays in place even in water. The dispenser also contains wound wipes and a larger number of plasters in different sizes. The Wound Care Dispenser is a smart complement to a First Aid Station and can be located close to where there’s a risk of suffering cuts. A protective dust cover keeps the contents clean and the dispenser is refilled using the refill key supplied. The dispenser is now easy to mount thanks to the adhesive backside.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Very robust and strong rescue glove with extreme protection levels, designed for firefighters and rescue teams, suitable for heavier rescue operations at accidents, (natural) disasters, etc. such as clearing debris, breaking up wrecks, etc. but also in various industrial applications. Sizes: 6-13.
Women's multinorm trousers LESHA with arc protection: Concealed button placket / Zipper fly; 2 inset pockets; 1 patched thigh pocket; 1 stick meter pocket with flap; 1 patch back pocket with flap; elastic waist; knee pockets; Waist with belt loops; Flame retardant reflective stripes (70mm). Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56 ladies. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1- ATPV 15.2 cal/cm², EN ISO 11612 : 2015 / A1A2B1C1E3F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / Class 2.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and not for 3-year life detectors!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS CO with alarms at 20PPM and 100PPM. Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Safety signs - eye wash available. Measure: 100x100mm.
TYVEK® IsoClean® slip-retardant shoe cover option 00 (Bulk packed) Serged seams. Elasticated opening. Slip-retardant Gripper™ sole. White. Available sizes: M and L (M = up to EU 39,5 - L = up to EU 47) For cleanrooms up to ISO 7, GMP C/D. NOT CLEAN PROCESSED. NOT STERILIZED.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Can also be worn on the arm or around the neck with accessories that can be supplied separately. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings). Atex version II 2G Ex ib IIC T4 Gb
Helmet hearing protector Sana 34 for safety helmet CENTURION.
High shoe in waterrepellent full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Low shoe glove in water repellent black Matryx multi-fibre. With a carbon fibre 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable textile and insole in polyurethane foam. Sole in EVA/Vibram Litebase, resistant to 300°C. Sizes: 38-48.
High shoe Glove in nubuck leather with aluminium toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement and scuffcap. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Earmuff helmet WS Alert XPI with built-in FM radio receiver, Bluetooth and level dependent function (surround). The Bluetooth® Multipoint Headset with Noise Canceling Microphone connects to a mobile app to make it easier to set up and customize the headset while wirelessly connecting two Bluetooth devices, such as a cell phone and a walkie-talkie. The headset helps protect you from dangerous noise, but also makes it easy to use both hands free on the phone in noisy environments. SNR: 30dB. In accordance with: EN352-3.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: Rubber. D-handle.
Flame retardant women's work trousers with stretch for the right fit and increased comfort during work that requires optimal freedom of movement. Quality: Tera TX, 260 gsm. Available sizes: 36-48. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612 A1 B1 C1 F1, EN 1149-5, EN ISO 20471 Class 1, IEC 61482-2 CL.1, ARC RATING: 9.5 cal/cm².
Flame retardant and anti-static t-shirt FR32: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Spectacle with light brown CBR65 PC lens with Supravision Excellence coating: anti-scratch (outside) and anti-fog (inside). Has ajustable side-arms and nose. Fits perfect onto the face. X-tended sideshield for increases side protection Color: black/white.
Safety glasses with smoke polycarbonat lenses and orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Low shoe in microfiber, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-49.
Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 8-1-0 9 KN.
Low shoe with textile upper. Ultra light, with a 200J composite toe cap and a synthetic anti puncture midsole. Outsole in EVA/Rubber with a perfect grip and self-cleaning lug tread. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2007 S1P SRC ESD
6-point suspension in textile with wheel ratchet and sweatband for helmets EVO-range. No PPE.
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
High shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
Clip to attach goggles to the Pheos helmet. Is also a clip to attach a chinstrap to the Pheos Alpine helmet. No PPE.
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
Navy blue disposable nitrile glove. Powder-free and accelerator-free. Ambidextrous, with roughened fingertips. Designed for use in l aboratories and research environments.
Flame retardant and antistatic long underpants for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature elastic waistband. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Comfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools.
DuPont™ Tyvek® 400 Dual TG. Overall with hood. Tyvek® on the front and large breathable SMS on the back. Stitched seams also taped on the upper body: armpits and wrists where Tyvek® liner gloves are attached. Attached Tyvek® socks. Elastic hood. Elastic waist (stitched in). Tyvek® zipper and flap. Chin flap with adhesive tape. NOT individually wrapped, 25 pieces in one box. Conforms to: EN 1073-2, EN 1149-5, Type 5/6 Available sizes: S - 3XL Available color: white *MADE TO ORDER*
Hat with thermal insulation in Primaloft fabric. Helps to maintain the wearer's body temperature. The HIVIS versions have two reflective stripes Available sizes: one size Available colours: black, dark navy, military green, fluorescent yellow and fluorescent orange
Oil and chemical resistant compressed air hose with a diameter of 10/16mm made of polyester reinforced with PVC, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
Multifunctional safety helmet for working at heights and rescue work. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.