BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Equipped with 1 D-ring. A loop can be formed by passing the webbing through the D-ring. Can also be used on vertical constructions. Length: 0.9 metre. Weight: 445gr. Anchor point for securing 1 person.
Low shoe Helium in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 36-47.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
Pezatec and Pezaflex stretch outer fabric. Outer fabric treated with water repellent Teflon HP. Pezaflex inserts under the arms. Waterproof Tektor reinforcement on shoulders with reflective piping. extended back. back and underarm ventilation. Elastic waist. Ergonomic collar. Sleeve narrowing by Velcro closure. large red area: arms and chest. 1 patch pocket on the left arm with smartphonepocket "splash proof". Zipper. 2 inset side pockets with "splash-proof" zipper.
50x blue rolled standard fingertips - latex-free - powdered
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.
Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.
High-shoe in microfibre, fitted with a steel toecap and plastic anti-perforation sole. With Sanitized silver lining for good moisture absorption and ergonomic, comfortable insole. Outer sole in PU/PU. Sizes: 35-42.
Kit with 10 ABS holders in white and red letters. 20 cards in polypropylene for scafftag inspection. 1 permanent marker. All marking in DUTCH.
Red backpack in Plan design Robust carrying material on both sides with reflective strips. Equipped with ergonomic handles and wide carry-straps for improved comfort on the back and shoulders. Plan design (extra strong, waterproof, anti-dirt) Dimensions: 36x47x26cm Weight 3kg - Volume 23L. Empty backpack.
Convenient plastic holder for Diphoterine Micro Dap.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length: 0.6 metres. Anchor point for protection of one person.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
Sportive safety spectacle with clear polycarbonate lenses provided with the Supravision Excellence coating: antifog and antiscratch. 100% metal free. The end of the temple has a notch so that an eyewear cord can be attached to the spectacle. Frame: blue/anthracite. industrial applications. PCF (Product Carbon Footprint) = 0,21kg CO².
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Portable counterweight anchorage that can be placed easily on a flat rooftop to connect maximum 2 workers to an anchorage point. Contains 12 loads of 24 kg, a base and D-ring. In line with EN795E. Transport cost included.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Air hood in the form of safety hood with PC visor. Air channel leads to the visor to prevent it from fogging. Can be used in combination with the Sundstörm motorunits SR500/SR700. Visor easy to fold up and air hose is replaceble. For work with a risk of mechanical impact. Weight: 700 g. NPF: 500.
Boot in PVC, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Arm protector, polyethylene, thickness 20 microns, length 40cm. Pack of 100. Available in: blue, white, red, green and yellow.
Sandal S1P in black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35- 52.
The work jacket offers plenty of storage options due to the different pockets. By being able to cover all metal push button closures, this work jacket is extremely suitable for the automotive sector or other activities where the prevention of damage to the surface is very important. This is also a very pleasant portable and multifunctional work jacket for other sectors. Available sizes: XS-5XL. Available colors: navy, black and dark gray.
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Cut and heat resistant arm protector 45 cm., with thumb opening. Ergonomic design. Protects for 21 seconds againt 100°C contact heat (test report).
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Ceramic blade with rounded tip in durable nylon handle. Ambidextrous desing. Non-sparking, non conductive, non-magnetic blade. Chemically inert, blade never rusts. Oil-and lubricant-free blade, safe up to 1600°C. No PPE.
Women's Shift trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure pocket, 1 back pocket with concealed press stud fastening, D-ring, reflective piping, adjustable elastic at the waist. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 34-54. Available colors: Navy, black and gray.
Cederroth First Aid Kit Medium is a First Aid Kit made from a durable rubber-like material with a matte finish to keep dust, moisture and dirt at bay. It keeps the equipment hygienically clean, so it is always ready to be used. The products are packed in transparent plastic pockets, so you can clearly see all the products, making it easy to find the product you need when every second counts. All products come with clear, self-explanatory instructions. The kit is bright green and yellow, making it easy to see from a distance. The practical handle with an adjustable Velcro strap makes it easy to attach the case or carry it with you. Suitable for 2 persons. Dimensions: 231 x 190 x 78 mm. Content: 1 Breathing Mask (REF 2596), 2 Pairs of Gloves (REF 2596), 6 Salvequick Wound Cleansers (REF 1880), 2 Safety Hand Cleansers (REF 2596), 1 Rescue Blanket with a heat-reflecting aluminium side (REF1892), 1 Scissors (REF 270002), 1 Cederroth 4-in-1 Bloodstopper (REF 1910), 1 Cederroth 4-in-1 Mini Bloodstopper (REF 1911), 1 Cederroth Burn Gel Dressing (REF 901900), 10 Salvequick Plasters (REF 1880), 4 Salvequick Maxi Covers (REF 658024), 1 Elastic Bandage 8 cm x 4 m (REF 1882), 1 Contents List, 1 First Aid Instructions.
Softshell Shift with zipper, 1 chest pocket with zipper, 2 inset side pockets with press stud fastening, sleeves adjustable by. Velcro, adjustable waist by means of drawstring, D-ring, reflective piping on the front and back of the shoulders, inner pocket with velcro. Quality: 92% / 8% polyester / elastane, 320 gr / m2 Available sizes: S-3XL. Available colors: black / gray, gray / blue, gray / red, gray / fluorescent yellow, charcoal gray and white.
Bib and brace Shift with large chest pocket with zipper, thigh pocket, pre-shaped trouser legs for a very good fit, Cordura® knee pockets with opening at the top lockable with flap and Velcro, ruler pocket with tape measure pocket, 1 back pocket, adjustable shoulder straps and reflective piping. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: Black / gray, red / gray, blue / gray, navy / gray and charcoal gray. Compliant with: EN 14404.
Short-sleeved fabric jacket, 100% cotton, 250g / m². Available in white. No PPE.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
First-aid kit Multi without filling incl. Wall holder. Dimensions: 43 x 31.5 x 15.5 cm. Weight: 2750 gr.
Flame Retardant Coverall: Guaranteed flame retardant throughout its life Yellow / Silver reflex to be clearly visible Premium flame retardant reflective striping Double layer reinforced knee protection for increased strength and durability Double stitched seams for more durability UPF 50+ fabric blocks 98% of UV radiation 3 storage pockets Two-way zipper for quick and easy opening Thigh pockets Fabric: Bizflame Plus. 280g. Standards: EN 1149 -5 EN ISO 11612 A1 + A2, B1, C1 EN 15614 Available colors: Navy. Available sizes: S-2XL.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
High performance multinorm rain trousers with leg narrowing by press studs and elasticated waist. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Colour: Navy. Available sizes: S-3XL.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 50 inches. Material: Rubber.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Light hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
Flame retardant work jacket in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the work jacket flexibility and offers freedom of movement and high comfort, while Cantex Weld at the front offers extra high protection against welding and grinding spatter. The work jacket has increased visibility. Concealed front zip with press studs. Extended back. Two walkie-talkie loops. Chest pockets with flaps, right with tool loops and concealed key ring for the ID card holder. Left vertical chest pocket with zipper. Spacious slit pockets with flap. Cuffs adjustable with press studs. inner pocket. Contrast stitching. Quality: Cantex Weld, 365 gsm. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Emergency first aid kit Industry is supplied with a wall holder. This first aid kit is specially composed to meet the needs of the "workshop". Dimensions: L 44.5 cm x H 32 cm x D 15 cm.
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
waistcoat Ronet: Long Sleeves; V-neckline; Velcro closure; Back length 76 cm (L). Complies with: EN ISO 20471 class 3.
Low shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
Safety glasses with orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. With foam and elastic headband. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes.
Safety knife and cutter in 1 with automatic blade retraction and optional locking for certain applications. Knife can be extended a maximum of 7.8 cm.
High shoe in black textile composed of high tenacity polyamide with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Frontal headlamp with ultra-light headband (included) With rechargeable Li-on that can be charged with a USB-C cable (included). max. 700 lumen light output.
Cut and heat resistant sanitized work glove compatible with touch screens
High shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 minutes. Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Version without hood. Belt sold seperately as an accessory. 15-year life cycle.
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Red hearing protector with neck band. Attenuation: SNR 35. Material: plastic. Features: allows simultaneous use of helmets or other head wear. Sizes: universal. Applications: pneumatic machines, compressors.
Terylene suspension with ratchet for safety helmet Roofer.
P1 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against irritating dust, mist and smok e particles.
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Black bag for large model. Suitable for goggles, with belt.
