BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.
Jacket, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², covered press-stud fastening, 2 front pockets with flap, breast pocket with flap, inside pocket, back pleats, sleeves with adjustable press-studs.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Spark catcher as accessory for motor unit Versaflo. No PPE.
GH4 chinstrap for the G3000 safety helmet.
Transport box for full mask, such as Shogun. Equipped with practical shoulder strap. Ideal for dust-free storage of full face mask and filter, when they are not connected together.
Ergonomically shaped kneeprotectors in 100% polyethylene. Very lightweight. To wear with TWO2000(1029448) or TWC2000(1029671). Dimensions: height: 22 cm, width: 17 cm. Available sizes: Universal. Available colours: Black.
Flame retardant and antistatic neckwarmer (buff) in Nomex® and meta- aramid polar fleece. Keeps bodytemperature in cold environments. Protects against heat and antistatic risks. Available size: universal. Available colour: paris blue.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of one person.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate CBR65 lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Coverall with a focus on safety and comfort. Characteristics include knee pockets, back fold and adjustable cuffs. In addition, there are functional pockets and a hammer loop. Hi-Vis reflective striping on the chest, arms and legs to be clearly visible. Quality: Kingsmill 245g (65% polyester / 35% cotton). Available colors: navy and black. Available sizes: S-4XL.
2-point textile chinstrap, compatible with V-Gard helmets.
Softshell vest without sleeves: • two side pockets with zippers; • chest pocket with zipper; • two inside pockets; • hidden button band with chin guard on top; • adjustable waist. Quality: 96% polyester, 4% spandex. Available sizes: XS - 5XL. Available colors: black, navy, dark gray, green, sky blue and red.
Multirisk Softshel Diablo: Invisible zip at the center front; Raglan sleeves; 1 vertical chest pocket; 2 front pockets; 1 inner pocket; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and cord stopper. Quality: 34% MODACRYL, 28% POLYESTER, 21% COTTON, 16% PU, 1% ANTI-STATIC. Conforms to: EN 1149-5: 2008, IEC 61482-2 class 1, EN ISO 14116: 2015 IND 3, EN 13034: 2005 + A1: 2009 TYPE PB [6], EN ISO 11612: 2015 A1 B1 C1 F1, EN ISO 20471: 2013 + A1: 2016 CLASS 2 and EN ISO 11611: 2015 A1 CLASS 1.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Winch closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49. with: EN ISO 20345 S3S FO SR ESD.
Ergonomically shaped knee protectors with an outer layer of plastic, a foam rubber cushion and a breathable lining. Comfortable mode l with excellent fit! The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours. risks.
Visor in polycarbonate, gold coated and foreseen with adapter for face screen carrier (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from -50°C to +135°C. Dimensions: 500x250x1mm.
Replacement hood for hood S-655.
Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
The INUTEQ-DRY® Bodycool Smart X is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body. Available sizes: XS-XXL Available colours: black, gray and yellow
Heated body warmer. Battery must be ordered separately.
Low shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
Universal anti-fog visor made of cellulose acetate. Shape 1: width 450 mm, height 200 mm and thickness 1.15 mm. For mounting on Lunar and Monteclipso. applications.
Dust mask, class P1, for irritating dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. Various classes of the Gobi series can be distinguished based on the different colours of filter material on the inside of the mask. NPF: 4.
Hygiene set for Peltor X2 earmuff.
configuratie op aanvraag/configuration sur demande
Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.
Sportive spectacles in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside and easy to clean.
Refill bag with 3M™ 1100 earplugs for use with the 3M™ One-Touch™ Dispenser. SNR: 35dB.
Fall-stop device with 3.4 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
Lightweight / Comfortable and breathable fabric, soft <(>&<)> supple / Inherently flameretardant properties / Very good moisture management properties / Non-allergenic and harmless to the skin / Reinforced seams for an increased durability and longer lifetime / Higher abrasion resistance / dimensionally stable / excellent pilling resistance. Quality: 31% polyester + 28% modacrylic + 20% aramid + 20% viscose FR + 1% AST. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
The Multinorm Fleece Jacket is made from 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. This product is EN ISO 11612 (protection against heat and flame) and EN 1149 (protection against electrostatic properties) certified. The fleece jacket is ideal to wear in cold and bad weather conditions. Available sizes: XS-5XL. Available colors: Marine. Compliant with: EN ISO 14116, EN 1149-5: 2008 and EN 14058.
Hi-vis ladies T-shirt for ambulance drivers with contrasting V-neck, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 67% polyester / 33% cotton, 150gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-3XL. Conforms to: EN ISO 20471 Class 2.
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Welding helmet shell 100-QR, without Quick Release Rail, without welding filter, without safety helmet.
Softshell vest without sleeves: • two zipped side pockets; • breast pocket with zip; • two inner pockets; • hidden button band with chin guard at the top; • adjustable waist. Including Aviko logo on the left chest (50cm²). Quality: 96% Polyester, 4% Spandex. Available sizes: XS - 5XL. Available colors: Navy.
Banded earplugs, lightweight and reusables, ideal for visitors. In line: EN 352-2 (SNR23).
Piqué polo shirt with short sleeves from the Progression collection, enhanced visibility EN17353.
The choice of professionals: maximum protection for arc welding. Ideal in shipbuilding and construction sectors, folding glass holder size 50x108mm. Weight: 521gr. Easy adjustable headband, perfect comfort, leather chincup available. Supplied with welding glass DIN 10.
Standard casing for hand wheel valves. Not PPE.
Burnshield gel, 50 ml bottle, cools burns.
Hard plastic (grivory) safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Welding goggles with white lens and Supravision HC-AF coating (extremely scratch resistant on the outside and prevents condensation on the inside. 100% UV-resistant). Flip up lens in grey polycarbonate with Infradur AF coating (offers protection against harmful UV and IR radiation when welding without altering colours, thanks to the grey lens (EN172). With anti-vapour coating on the inside and extremely scratch-resistant on the outside).
Classic goggles with appropriate fit for each face. Lens in gray polycarbonate: like all uvex PC lenses offer the gray tinted lenses 100% protection against harmful UV radiation to 400 nanometers. The gray tint filter parts of the visible spectrum and it offers protection against intense glare of sunlight among others. The color signal recognition of color remains unhindered. Protects against reflections and optical irritations outdoors (e. g. water surfaces) for greater visual comfort. With anti-scratch coating coating.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
Comfortable bump cap made of maintenance friendly and breathable DuPont Teflon polyester, with modern 'casual' baseball cap look. Has a wheel ratchet. Full peak. With woven ventilation opening on top panels. Size: 54-62cm.
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
