BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
High shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable GEOX and active carbon activated antibacterial insole. Insole EVA + TPU/Nitrile, resistant to 300°C. Sizes: 35-48.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Safety helmet made of polyethylene with 6-point textile suspension (51-63 cm) and black nylon sweatband, without ventilation. With European 30 mm slot for attachment of hearing and face protection.
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Belt with metal buckle in high quality leather. Available sizes: 65-95cm / 80-110cm / 100-130cm. Width: 4 CM. Available colours: black, brown.
Sweatband for suspension of Iris helmet. Not separately certified as PPE.
Medium oily, silicone-free care cream for use after work. Stokolan sensitive penetrates rapidly and is suitable for any type of skin. Free from perfume, preservatives and colourants Dermatologically certified and skin-friendly With 9.5% natural moisturising factor (NMF). With ECARE quality label for allergy-friendly products with creatine and other oily, moisturising components. In line with HACCP and suitable for use in the food industry Easy to rub in Description: Soft Cream (O/W-emulsion). Free from perfume, preservatives and colourants, silicone and parabens. Suitable for hands and face. Content: tube of 100ml.
A mid-cut new designed lightweight safety shoe with extra ankle support, knitted textile upper and BOA® Fit System. Outstanding ergonomics, padded Memory foam and water repellency means day-long safety and comfort. An oil resistant RPU outer sole gives outstanding grip and a ventilated inner sole keeps feet cool. Features JALAS® aluminium toe cap, plasma-treated textile puncture protection and double impact protection zones in PORON® XRD®.
Low-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole, scuffcap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency. Sizes: : 37-49 (D, XD).
Jacket flame retardant and antistatic, 80% cotton 19% polyester 1% anti- static yarn, satin binding, 280gr./m², 1 chestpocket with flap, 2 patched pockets with flap, hidden closure, retro-reflective bands. Available in: navy.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
High shoe in leather, S3 WR HRO HI CI SRC with a synthetic antiperforation sole and 200J toecap. Has a Sympatex lining and a cold and heat isolation. Insole in textile. Vibram sole against heat and with good antislip values. Sizes: 38-47. Suitable for heavy industries. In accordance with: EN 20345 S3 SRC WR HRO HI CI.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. Created for the thickest carton boxes! The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Dimensions: 154 x 22 x 67 mm Weight: 151g Depth: 21mm Blades: 1021313
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP3 level, protects against solid and liquid particles of high toxicity. NPF:50.
Flame retardant comfortable sweater with round neck and Hi-Vis accents on the sleeves. 20% recycled cotton. Knitted neck, cuffs and hem. With heat seal reflection. Entirely metal-free. Quality: Cantex Terry, 290 g / m². Available sizes: XXS-4XL. Available color: Fluo yellow / navy. Compliant with: EN ISO 11612: A1+A2 B1 C2 F2, IEC 61482-2: CL.1, EN 1149-5, ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
The HAZMAX S5 HRO ESD boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 35 - 50.
The Sweater Mulitnorm from the Tricorp Safety collection is made of 60% modacrylic, 39% combed cotton and 1% carbon with a canvas weight of 280 gr / m2. This product is EN ISO 11612 (heat and flame protection) and EN 1149 (protection against electrostatic properties) certified. Quality: 60% Modacryl / 40% Combed cotton, 280 g / m². Available sizes: XS-7XL. Available colors: Marine. Conforms to: EN ISO 11612 and EN 1149.
Safety glasses in clear PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
Universal face shield with anti-fog feature (1,15 mm) in acetate (chemical resistant). With a chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso. general industrial applications.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Hypo-allergenic gloves. The patented PVC immersion method guarantees a high resistance to various harmful chemical products, while the Kevlar® liner provides a high resistance to cutting, abrasion and tearing. Available in: blue. Sizes: 8M / 9L / 10XL / 11 XXL.
Black sock with grey foot. Excellent moisture control to work in warm conditions. Fitted with an extra heel, toe and shinbone protection, and extra leg and ankle support. Antibacterial. ESD: electrostatic discharge. Made of: 35% cotton, 24% polyamide, 20% polyester (Pro-Cool EcoMade), 14% acryl, 1% Bekinox, 1% Lycra elastane. Available in: anthracite, black. No PPE.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
Very light and comfortable fall-protection harness with two attachment points: on the back and on the chest. When the chest attachment point is used, two loops must always be used. Shoulder and leg straps are easy to adjust. Coolmax lining on shoulder and leg straps. Chest and leg straps with quick closure. Harness can be put on very easily. With straight leg straps for greater safety and comfort. With fall indicator Weight: 988 gram.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
Safety glasses with grey frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti- scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and in hibits vapour formation by more than 2 minutes. Not supplied with glasses cord.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRA antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Knee protector made of 100% Polyethylene. Dimensions: 245 x 145 x 18 mm. In accordance with: EN 14404
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
The Polar BUFF contains Polartec fleece at the neck for extra warmth. This buff is recommended for use in static work in cold conditions. Quality: 97% Polyester 3% Elastane. Available sizes: Universal. Available colors: Fluo yellow / navy, fluo orange / navy, navy and black.
Comfortable, universally usable safety helmet made of polyethylene with 6-point textile suspension and leather sweatband. With rain gutter, variable ventilation and extended neck protection. Available in: white, yellow, blue, red, green, orange. This helmet is also known under the name BER I/79G-R.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C. Suitable for: general industrial applications.
The Mizar is a TÜV-approved safety knife with automatic blade retraction that is excellent for cutting many different packaging materials, especially cardboard and foil. A high-quality plastic construction in a handy ergonomic design is the key to working efficiently. This means fatigue-free work for the user and increased productivity for the company. With its unique "3 in 1" slider, the knife can be quickly and easily unlocked for cutting when needed, securely locked for transport, and easily opened for blade replacement. With its sqeeze lever grip, both right-handed and left-handed users can cut equally well. The blade can be changed without tools, simply, quickly and safely. No PPE. Blades: 1016008
Earmuff for helmet X2 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 30dB.
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Sweatvest Fleece Luxe has a contemporary fitted fit. This product is finished at the bottom and at the end of the sleeves with elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-7XL.
High shoe in hydrofugated textile, with a synthetic antiperforation sole and steel 200J toecap. With TPU scuffcap. Fitted with a Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Light yellow hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back. Sizes: 6 to 12 Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Performed in the latest innovative design. This timeless two-color hi-vis jacket is stylish and practical. The chest pockets are suitable for the modern mobile phone dimensions and the spacious pockets on the bottom are equipped with a zipper to safely store stuff. Other features are the reflective piping, HiVisTex Pro reflective striping, the Velcro adjustable cuffs and the reinforced double stitched seams. Quality: 65% polyester / 35% cotton. Available colors: Fluo yellow / navy, fluo orange / navy, fluo yellow / black and fluo orange / black. Available sizes: S-3XL. Complies with: EN ISO 20471 Class 3.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Vlamvertragende in antistatische fleece voering met lange mouwen. Comfortabel dan een warme fleecen voering. Daarnaast is de Troston ook vlamvertragend en antistatisch en kan gemakkelijk in verschillende jassen ingeritst worden. Kwaliteit: Dubbelzijdige fleece: 54% modacryl + 34.2% FR katoen + 10% nylon + 1.8% AST; ± 260 g / m². Beschikbare maten: S-3XL. Beschikbare kleuren: Marine. Conform: EN ISO 11612: 2015 / A1 B1 C2 F1, EN ISO 14116: 2015 / IND.3, EN 1149-5: 2018 en EN 14058.
