BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Functional layer 3 wind and water repellent ladies coat. Two chest pockets, left with inside pocket on the phone. ID card holder. Two side pockets. Sleeve pocket on the left arm. Inside pocket on the left with a hands-free opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for more comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 3XL. Available colors: black, white, navy, gray, green, sky blue and red.
Safety spectacle with grey lenses. Leightweight (23gr). With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
3M ™ PELTOR ™ Wind protection for electric microphone
Innovative protective spectacle, for small faces. Individually adjustable side arms with variable inclination. Integrated Softflex zone ensures outstanding wearer comfort for all head sizes. Softflex nose piece ensures comfortable, pressure-free fit and remain firmly in place. Soft ear and Softflex bridge pieces ensure a secure fit in any situation. Supravision Plus coating: anti-fog on both sides, scratch- resistant and antistatic.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
Lined jacket with chest and side pockets. Internal wind flap with chin guard to prevent chafing. Spacious inner pockets. Appendix for ID card. Extended back. Reflective piping on sleeves and back. Adjustable cuffs and waist. Quality: 65% polyester, 35% cotton, 245 g / m². Color: navy, black, green, gray, red, sky blue and kakhi. Sizes: XS-4XL.
Beanie in single jersey with matching flatlock stitching. Quality: 95% Cotton 5% Spandex (Black). 60 % polyester, 33 % cotton, 7% Spandex (yellow/orange). Available sizes: Universal. Available colours: Skyblue, forestgreen, black, navy, orange, yellow/navy, grey and red.
Fluo rain trousers RWS, 50% polyester, 50% polyurethane, 190 gr / m² Microflex. Elastic at the waist, 2 side pockets, high frequency welded seams, adjustable press-stud fastening underneath pipe, RWS reflection, wind- and waterproof. Available sizes: XS-5XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Cry-o-ptimal cold packs reduce swelling and thereby alleviate the pain of both inflammation of joints and muscles, trauma of tissues and injuries. Can be combined with shouder strap (art. 1044758) and knee strap (art. 1044757).
The 3M™ Peltor™ LiteCom Pro III earmuff is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 33dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Davit mast 144 cm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Adaptor to connect the old davit arm with the new fixed base No PPE.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
The micropore nitrile palm coating is designed to deliver excellent grip, in both dry and oily conditions. With 360 degrees breathability, hands will be comfortable and free from irritation. EN388: 2016 level E cut resistance Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 3 E; Fine 15 gauge lightweight liner; Increased abrasion resistance to level 4 for 2021; High level of tactility and dexterity; Approved for food contact to EU Regulation 10/2011; Touch screen compatible; Breathable liner and palm coating; New micropore nitrile palm delivers good dry and oil grip; Antistatic to EN1149-5: 2008.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
A smooth knit sock with elastane for snug, comfortable fit. Integrated toe seam. Merino wool 60%, Polyamide 35%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Ensures fastening on smooth surfaces and on glass. Dimensions: 168(H) x 78(W) x 45(D)mm Weight: 75g
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 64%, Polyamide 35%, Elastane 1%. Sizes: 36/39, 40/44, 45/48. No PPE.
The Squids® 3132 Scanner Lanyard Harness keeps barcode scanners secure and accessible during warehouse and distribution work. With its ambidextrous design, the industrialgrade harness maintains a comfortable fit for both right- and left-handed workers while keeping scanners ready for use. Two small loop attachments connect to captive holes built into the scanners, allowing them to hang comfortably on the hip when not in use and preventing damage or injury caused by drops. Can be combined with holster (art. 1054143).
The Besto 300 Newton twin Chamber is an automatically operated lifejacket designed in accordance with the SOLAS/MED requirements: • Tailored design; • Zipper closing; • Double crotch; • Fleece collar; • Standard Cordura 420 cover. Full performance is achieved by full inflation of one or both chambers either by the automatic or manual initation of the operating mechanism or by use of the oral tube facility. This lifejacket designed for use on open sea and in all weather conditions.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision AR coating: anti-reflective lenses. Frame: black/blue.
Signa work trousers with stretch: • 4-way stretch material for extra freedom of movement • leg pockets with zip • fastening for nail pockets • zipper • preformed knees • adjustable knee pockets on the inside, reinforced on the outside. Available sizes: C44-C64, D84-D120, C146-C156. Available colors: fluorescent yellow / navy, fluorescent orange / black and fluorescent yellow / black. Conforms to: EN ISO 20471 class 1.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
Disposable safety knife with a safe hidden blade, especially for cutting foil and paper in the food industry. Metal detectable blue plastic with stainless steel blade. No PPE.
Stainless steel safety knife, NSF certified, metal detectable. Highest cutting level with integrated blade. Blades are replaceable. Consists of 100% stainless steel and is easy to clean. Suitable for left and right-handers. Cuts plastic, paper bags, tape, strapping tapes, foils, 1-ply cardboard. Replacement blade: 1052578
Spare part for motorunit TR-800.
First aid kit Res-Q-Assist Q50 with content tailored to the food industry. The Res-Q-Assist cases have a special color system and color pointer to find, select and use first aid equipment faster and more efficiently. The color pointer immediately shows you which material to use in which situation. Here you will receive instructions on how to use it. Faster, more orderly and more accurate! Material Resc-Q-Box: ABS plastic case, shock and shape resistant, temperature, dust and splash-proof, maintenance-free with transparent cover plates, flexible hinges and durable closure. Complies with HACCP standards. Refill: Art 1053026.
Towel 100% cotton, 400 g/m², 50 x 30 cm. Available colors: White, black, red, light blue, royal blue and gray.
Pac of 10 pre filters for motorunit PX5.
Hose to connect C40 regulator with hood.
Bottle of 110 liters with test gases for calibration of gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%).
Safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Robust belt clip for Twig NEO rotates 90 ° so that the device can be worn both vertically and horizontally. The belt clip is securely attached to the device with screws, glue and a bracket.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must be attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. Monitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Storage bag for KASK helmets. No PPE.
Removable leg paddings for more comfort. Fits all new models of 3M ™ Protecta® harnesses. No PPE.
Your ear defenders are always close to hand with the neck cord. The clothing clip reduces the chance of losing your ear defenders. C omfortable due to soft silicone material. Safe because the cord is released from the ear defenders if it catches on something. Easy to attach and remove from your ear defenders.
Earmuff WS Alert X with Bluetooth and level dependent function (surround). The Bluetooth® headset with noise-cancelling stick microp hone connects to your mobile phone for hands-free calling and streaming in noisy environments. The headset helps protect you from dangerous noise while promoting your situational awareness through the level-dependent function for listening to the environment. The headset also syncs with a mobile app, allowing users to easily set up and customize the headset. SNR: 30dB. In accordance with: EN352-1.
Super-light safety helmetwith short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Headband for welding helmet Speedglas G5-01. Includes attachment set. Not certified as PPE itself.
Flame retardant women's boxer shorts in a soft jersey with 20% recycled cotton. Elastic at the waist. Mid-rise waist, regular leg length. Lined crotch area. Quality: Cantex JL, 210 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, IEC 61482-1-2 CL.1, ELIM: 4.3 cal/cm², EBT: 4.5 cal/cm².
Low shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a textile 3D-lining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
I-beam anchor for I-beams ranging from 100 to 330 mm. Suitable for 1 person and to combine with a fall arrestor or safety line. Atex approved.
Sweatband removable for cleaning. Fits 3M SecureFit™ safety helmets, series X5000 and X5500. No PPE.
Plastic carry bag with belt for protecting full face masks against dust and dirt.
Low shoe in black textile composed of high tenacity polyamide with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Tyvek® IsoClean® IC193B TS coverall DuPont™ Tyvek® IsoClean® hooded coverall, model IC 193 B WH TS. Gamma-sterilized. Bound internal seams. Integrated overboots with a slip retardant Gripper™ sole. White. Available sizes: XS - 7XL (XS, 4XL, 5XL, 6XL and 7XL made to order. Terms <(>&<)> conditions applicable.) For cleanromms up to ISO 5, GMP A/B. STERILE ONLY
Tyvek® IsoClean® IC 729S WS Bouffant Elastic headband. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Charger as accessory for motor unit Clean air Chemical.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
Super-light safety helmet with short peak, made of strong polypropylene. With mesh visor and earmuffs. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey
Protects against organic gases and vapours with a boiling point over 65 °C. For use in combination with full or half face masks with standard threads. . Class 2 gas filter: for max. concentration of 0.5 %.
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with hood and increased visibility.
The Zoll AED 3 is a fully automatic device that is monolingual.
Charger for socket with USB-C connection.
The cabinet has successfully passed the stringent VDMA test at a certified and appointed test centre. The test proves the quality and strength of the cabinet and guarantees a reliable and safe solution for storing and charging lithium-ion batteries. Maximum load per adjustable and fire-resistant shelf (4pcs) : 70kg, designed to prevent fire spread between levels. Each level is equipped with a charging strip with 8 sockets. Recess for pallet trucks on the 4 sides. Self-closing doors with door contact, equipped with a unique overduck system with possibility of connection to an exhaust system. Smoke and temperature detection with alarm, connection to fire control centre possible. Option to add an aerosol system (1063002) for even faster fire control. External dimensions: H: 1995 x W: 1141 x D: 758mm. Transport cost included - when ordering, please state clearly if there is a forklift available.
