BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Ascender for left-handers for use on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openi ngs at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a bette r grip when pulling up a rope.
Ascender for right-handers on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openings at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a better grip when pulling up a rope.
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air up to 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. processes involving chemical risks. NPF: 50 with M-100 and 200 with all other usable air hoods.
Welding lens attachment for 3S full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
First aid. Rescue sign in polypropylene. Dimensions: 148x148mm.
Absorption spill kit with an absorption capacity of 152 litres. Intended for medium-sized spills. Content: 50 pads (41 x 51 cm), 4 s ocks (7.6 x 366 cm), 8 pillows (43 x 48 cm), 1 pair of safety glasses, nitrile rubber gloves, 5 disposal bags and 1 emergency respon se handbook. The absorption material in the spill kit is of OP quality. Packaged in a 200-litre chemical and water resistant drum. S uitable for: general industrial use.
Mobile phones prohibited. Prohibition sign in polypropylene. Diameter: 200mm.
Fire, open flame and smoking prohibited. Prohibition sign in polypropylene. Diameter: 200mm.
Warning sign - Caution Danger in self-adhesive polyester. Side Dimensions: 200mm. Not PPE.
Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: 315mm. Not PPE.
Absorbent pads on a roll measuring 96 cm x 44 m. These heavyweight perforated pads on a roll are packaged in a bag. Available per roll. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 274 litres.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Prohibition sign - No mobile phones in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Kernmantle rope Rollgliss 9MM
Measuring tube CO2-HP.
Positioning belt with pass-through buckle and padding.
Rescue sign - Emergency exit right in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Measuring tube to be used in combination with hand pump to measure concentration.
Wall stand, metal. Unrolling system for industrial rolls. For use with blue industrial paper rolls, art. no. 02050026. Dimensions: 450 x 900 x 450 mm.
Plastic spill tray with grid. Capacity: 43 litres. Weight: 7kg. Dimensions: 800x605x170mm.
Plastic spill tray with grid. Capacity: 22 litres. Weight: 3.5kg. Dimensions: 595x395x170mm.
Belt Holster made of plastic. Ideal to have your MARTOR SAFETY Cutters readily (and safely) to hand at all times. There are two ways of attachment: a) at the belt b) clipped to the "rule pocket" edge In this Holster fits: PROFI, PROFI25, PROFI40, MULTISET, MULTISAFE, PRIMAX, IDEAL, PROTEX, MULTIPOS. No PPE
Digital thermometer for exact measurements.
Replacement visor for Vision Plus helmet. Has a anti-scratch and anti- fog coating.
Kit with ABS holder in white and red letters. 10 cards in polypropylene for ladder inspection. 1 permanent marker. All marking in DUTCH.
Polyethylene container, capacity 1150 litre, polyethylene, removable grid. With 4 lifting sides. Dimensions: 1230 x 1230x 1090 mm, colour: blue. Weight: 62kg.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Blue detectable waterproof elastic plasters individually wrapped. 5 different types.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2 (horizontal).
Case with 100 bandage hooks.
Refill for mobile spill kit 69L SKO-CART for quick and efficient response to leaks or maintenance projects, anywhere in the factory. Absorption capacity: 69 litres. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of OP quality.
Replacement power adaptor for 5 GasAlert-devices.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 21x21mm. Roll. No PPE.
Bottle of 110 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
Sign according GHS09 normation in self adhesive polyester: Hazardous to Aquatic Environment. Size: 21x21mm. 250 pieces per roll. No PPE.
The Fall Arrest SOLAS 300N is a two chamber life-jacket developed for use with and attachment to fall harnesses. Suitable for use on the open sea and under all circumstances, including extreme weather and when wearing heavy, waterproof, protective clothing. The jacket stays put and keeps the airways clear of the water. Incl. 2 leg straps. Material: Clean wipe PVC. Also available in yellow and black PVC and in Cordura black, blue and red. Solas approved.
Plaster with a detectable strip under the cushioning. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot.
Secubox midi without symbol, blue. Dimensions: 236x225x120mm. With fixation material. No PPE.
Sweatband in towelling + velcro. Packaged in sets of 20. Not separately certified as PPE.
High quality replaceable Nexus 4-points harness with easy side adjustment provides approval to EN 12492 working at height (Mountaineering helmet standard) in conjunction with the Nexus liner (1034405). Conform: EN 12492.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 2C-1.2 1 FT KN.
Baseball Bumpcap XTRA.
Case in neoprene for roller meters. Fits most roller sizes. Provided with a clip to attach to a belt strap or holster. Ideal when working at height Not PPE.
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
Python scaffold wrench holster (belt)with retractor and ext-H2LBungee.
Helmet hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Safety knife Safety Roll Slitter 40mm, suitable for right-handed and left-handed use and equipped with a 71mm long blade, cutting 40mm deep. Can be used to open bags and for light cutting operations such as cutting paper webs. The blade is very flexible so the risk of depleting is very low. The blade is connected to a spring and pulls back automatically into the container. No PPE. Blades: 1034547
Double fall-stop device 2 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Polo shirt, 100% cotton, 180 g/m², classical collar, front closure with buttons, neck tape, sewn in long sleeves with manchette, splits at the side. Available in: navy. No PBM
Ultralight OTG spectacles, white , visible light transmission: approx. 75% ,color: light-grey 850-900 DIRM LB2 LV CE (OD2+) >900-950 DIRM LB3 LV CE (OD3+) >950-1030 DIRM LB4 LV CE (OD4+) >1030-1400 DIRM LB5 LV CE (OD5+) >1400-2200 D LB4 IR LB4Y LV CE (OD4+) 2400-2800 DIR LB3 LV CE (OD3+) >2800-11500 D LB4 I LB4Y LV CE (OD4+)
Constructed from a heavy-duty canvas with an inner lining to prevent punctures, with multiple inner pockets and integrated D-ring makes tehtering tools easy. Magnetic closure system. Dimensions: 22,2cm x 30cm. No PPE
Goat leather combat glove combined with heat resistant materials from Nomex / Kevlar intended for special operations for intervention services and riot police. Knuckle protection, palm grip, thumb protection, closure with Velcro. Sizes: 8-11. In line with EN388: 3.2.3.2, EN407: 4.1.X.X.X.X
Set of 4 cooling packs at a constant temperature of 29˚C. These 100% biobased INUTEQ-PAC® PCM packs perform under any extreme temperature and at every level of humidity. For the Bodycool Pro cooling vest (1052092).
Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Storage bag for V-Gard 900.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Low shoe in waterrepellant leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
