BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The X6 suit is designed to fulfil requirements in extreme conditions. It has superior reinforcement panels on knees and seat areas for enhanced abrasion resistance. Characteristics: High abrasion resistance reinforcement panels added to knees and seat area; High collar + extra protective chin strap with touch and close fastening. High-Visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stowed in collar; ID pocket on left sleeve and extra pocket on right arm for strobe light; SOLAS approved retro-reflective tape on hood, upper arms and wrists; No chest pockets to minimize snagging hazards. Available Sizes: S-3XL Available Color: Orange.
Innovative fit-over frame, flexible temples, visible light transmission: approx. 28% ,color: green.
The 3M™ Peltor™ WS LiteCom Plus is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom Plus headsets and portable two-way radios programmed on the same frequency. Has Bluetooth® Multi-Point connectivity. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy envir onments. SNR: 31dB. In accordance with: EN 352-3
Ear muff with Bluetooth and radio AM/FM function, with a limit of 82dB. This earmuff admits important conversations and alarm signals, at a safely amplified level. SNR: 30dB.
Floormarking: straight ahead arrow. Diameter: 350mm. No PPE.
Concealed zipper with concealed press studs, 2 side pockets with flap, 2 chest pockets with flap, inside pocket with zip, 2 escape mask loops, detachable hood, RWS striping, extended back panel Quality: 50% / 27% / 22% / 1% polyester / modacrylic / cotton / carbon + PU membrane + DWR, 395 gr / m2. Available colors: Fluo orange. Available sizes: XS-4XL. Complies with: EN 1149, EN 13034, EN 343 3: 2, EN ISO 11611 class 1, EN ISO 20471 class 3, EN ISO 11612, IEC 61482 class 2.
Raincoat RWS, 50% polyester / 50% polyurethane, 190 g / m², fluor orange, high frequency welded seams, fixed hood with drawstring, zipper under storm flap with press stud fastening, sleeves with adjustable press stud fastening, 2 straight pockets, RWS reflection, wind- and waterproof , water column: 8000 mm. Available sizes: S-5XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 (RWS), EN 343.
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Flame retardant dungarees with a thin lining. Adjustable braces with concealed fix-lock closure and elastic on the back. Chest pocket with flap and key ring. Inner pocket. Side pockets. Back pockets with flap. Cargo bag with flap, telephone pocket and concealed key ring. Ruler bag. Pre-shaped knees with height-adjustable knee pockets on the inside. Entirely metal-free. Reflection on the pipes. Available sizes: 44-64, 146-156, 24-30. Available color: navy / fluorescent yellow. Compliant with: EN ISO 11612 A1A2B1C1E1F1, EN ISO 11611 Class 1, IEC 61482-2 Class 2, EN 1149-5, EN 13034 [PB] type 6.
T-shirt sleeveless, 100% cotton. Available colors: Light gray, black, white, yellow, red, orange, purple, lime, kakhi and navy. Available sizes: XS-XL.
The two-color modacrylic fabric, in combination with the reflective striping, ensures that the wearer is more visible and fully protected in dangerous situations. The improved design meets the strictest requirements of the arc. Quality: 60% Modacrylic, 39% Cotton, 1% Carbon fiber 280g. Available sizes: S-3XL. Available colors: Fluo yellow / navy. Compliant with: EN 1149-5, EN 13034 Type PB [6], EN ISO 11612 A1 + A2, B2, C1, F1, EN ISO 11611 Class 1 A1 + A2, IEC 61482-2 IEC 61482-1-2 Class 1 and EN ISO 20471 Class 2.
Coverall made of carbon fleece / aluminized para-aramid 430g / m² - grain leather collar - zipper under flap closed by hook-and-loop fastening and snaps - KEVLAR® thread seams - lined in fire-retardant cotton treated with Proban® network of pipes sewn on the lining to diffuse the air towards lower / upper limbs / body - the air in overpressure circulates between the lining and the external layer and is charged in heat and evacuates it which refreshes the interior of the suitFaucet holder max 7 bars on belt (unless suit supplied with ventilated hood) to be connected to a filtered "breathable quality" filtered clean air network - limited intervention time and ambient temperature. Suit without belt or tap because used in addition to a ventilated hood E5111-611. Available sizes: M-XXL. Complies with: EN ISO 11612 A1B1C4D3E3F1.
Flame retardant Hi-Vis work trousers with a thin protective lining. Contrast stitching. Side pockets. Back pockets with flap. Cargo pocket with flap and concealed key ring. Ruler pocket. Pre-shaped knees with height-adjustable knee pockets on the inside. Quality: Tera TX, 260 g / m², Available colors: Fluo yellow / navy. Available sizes: 44-46, 146-156. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.2, EN 1149-5, EN 13034: TYPE PB [6], EN ISO 20471: CL.1 (ARC RATING: 20.2 cal / cm²).
Man Overboard Rescue containing: strong nylon container with rail connection, buoy with 40 meter floatation line.
This set of bracelets ensures pleasant cooling. Activate this technology by immersing the bracelets for 2 minutes in water. The cooling works for up to 8 hours! Available sizes: Universal Available colors: Black
Solid Lockable Cover for confined space. Fits standard 914 mm opening. No PPE.
Gas filter A1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. Can be used in combination with the Sundström half and full face masks.
High shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breath able, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Technically constructed sock that is flat-knit and uses mesh panels to enhance the features of the sock. Thanks to its mixed knitting technologies it fits perfectly on the foot, reduces the risk of blisters and provides extra support and ventilation where needed. Integrated toe seam. Merino wool 60%, Polyamide 35%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Flame retardant and anti-static long johns for women in 60% merino wool / 38% Lenzing FR® / 2% Beltron®. Cool and comfortable material, regulates body temperature, elastic waistband. Quality: 60% Merino wool / 38% Viscose FR / 1% Antistatic. Available sizes: XS-XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA).
Reusable hair net adjustable with press studs at the back. Washable up to at least 100 turns. Quality: Alsisandwash, 99% PES / 1% CA, 93 g / m². Available sizes: Universal. Available colors: Light green and white.
6x Salvequick finger plaster refills of 30 pieces (REF 6096).
Flame retardant boxer shorts with recycled cotton. Quality: Cantex JX, 235 g / m². Available colors: Navy. Available sizes: XXS-3XL, 5XL and 7XL. Conforms to: EN ISO 11612 A1 B1 C1 F1, IEC 61482-2 CL.1, Arc Rating: 7.0 cal / cm².
Quilted winter jacket. Reversed, waterproof zip in the front and on the side pockets. The side pockets are finished on the inside together with the seam so that they can be used as inner pockets. Adjustable popper fastening at the cuffs. Adjustable hood with elastic drawcords on the sides, finished with an elastic trim at the hem Quality: 100% recycled polyester, 230 g / m². Color: navy, black and green. Sizes: S-3XL.
Rain jacket in light stretch material: • wind and waterproof • taped seams • waterproof front zip • internal storm flap • chin guard • side pockets with zip • segmented tires with stretch • thumb grip on the cuffs • extended back. Quality: 100% polyester, 140 g / m². Available sizes: XS-3XL. Available colors: Fluo yellow / black. Conforms to: EN ISO 20471 class 1.
Padded hi-vis ladies softshell jacket: • quilted lining • wind, water-repellent and breathable softshell • adjustable and detachable hood • fleece-lined collar and side pockets • two breast pockets • concealed zip at the front • two side pockets • one sleeve pocket on the left sleeve • loop for badge holder • mesh vents • adjustable waist • adjustable cuffs • extended back • reflective piping on sleeves and back Quality: 100% polyester, 250 g / m². Available sizes: XS-3XL. Available colors: fluorescent yellow / black, fluorescent orange / black, fluorescent yellow / navy and fluorescent orange / navy. Conforms to: EN ISO 20471 Class 3/2.
Flame retardant and anti-static jcket in Bizflame Plus 99% cotton / 1% AS (350g / m²). Closure with press studs, 2 breast pockets with flaps and press studs, 2 side pockets with flap and press studs, radio loop, reflective striping, adjustable cuffs with velcro. Quality: Bizflame Ultra 340g. Available sizes: S-3XL. Available colors: Navy and Orange. Conforms to: EN ISO 11612 A1 + A2, B1, C1, E2, F1, EN ISO 11611 class 1 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 1 and EN 13034 Type PB [6 ].
BHV First aid kit Office <(>&<)> Schools is supplied in a first aid kit A multi including wall holder. The case is equipped with transparent inner plates, which provides a good overview of the available resources when opening. This very extensive first aid kit is specifically aimed at schools. Dimensions: 44.5 cm x 32 cm x 15 cm.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
The 3M ™ GoggleGear ™ 6000 Goggles GG6001SGAF-BLK-EU is our large goggles with a black sealing edge and indirect ventilation for air circulation and less fogging. The clear polycarbonate lens features a Scotchgard ™ scratch resistant and anti-fog coating for greater durability and better visibility.
Comfortable combination safety goggle and half mask in TPE with replaceable ABE1P3 filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Training version of the NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Long John for men without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS - 4XL. Available color: White.
Ballistic goggle with panoramic view. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
The polo sweater bicolor with breast pocket for ladies from the Tricorp Workwear label is a popular item. This durable two-tone polo sweater is shape and colorfast thanks to the combination of cotton and polyester. Thanks to an elastic hem at the bottom, it protects better against wind than other similar sweaters, the inside is roughened for extra comfort while wearing. Fabric: 60% cotton / 40% polyester, American fleece, 280 g / m². Available colors: navy, black / gray, black / red, black / orange and black / green. Available sizes: XS-3XL.
Sleeves in heavy PU quality, 50% Polyester, 50% Polyurethane, 240 g / m², Oil and cold resistant, Wind and waterproof. Sizes: Universal. Colour White. Conforms to: EN 343 3: 1, EN1186 and EN13034.
Metal detectable disposable knife with integrated stainless steel blade, for left and right-handed use. Suitable for use in the food industry. For cutting tape, strapping tape, plastic, paper bags, foils, 2-ply cardboard. No PPE.
Flame retardant work jacket with additional Hi-Vis reinforcement on the shoulders for increased heat protection. The work jacket is made in a strong and supple satin, specifically developed for work with zinc and chemicals. Concealed front closure with press studs and jeans button. Chest pockets with flap. Side pockets with flap. Three inner pockets. Adjustable cuffs. Contrasting seams. Quality: Apex 300, 300g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm².
The world's first curved auto darkening filter - especially for TIG welding! Until now, automatic blackout filters have always been flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision.
The ROFA NOMEX® professional jacket made of reliable Nomex® fabric, offers high protection against flames and heat at low weight. An additional plus is the electrostatic conductivity. The highly lockable lapel collar offers optimal protection and side seam slots create sufficient freedom of movement. The concealed front push button placket as well as the various pocket solutions are practical for more effectiveness when working. Quality: Fabric 435, body, 98% aramid 2% other fiber, approx. 265 g/m². Available sizes: 44-66, 90-114 SCA. Available colors: Royal blue.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 42 inches. Material: plastic.
Softshell Modaflame MV73: Inherently flame retardant; Protects against radiant and convection heat; zip pockets; Adjustable drawstring in the hem; adjustable cuffs; 3 storage pockets; radio loops; Flame Retardant Reflective Striping wind resistant; Quality: Modaflame Softshell: 100% Polyester 95gr. laminated to a flame retardant TPU membrane 35grams composed with an inherently flame retardant Fleece 60% modacrylic, 39% cotton and 1% carbon fiber 220gr, total fabric weight 350grams 350g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1 B1 C2, EN ISO 11611 Class 2 A1, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 APC 2, IEC 61482-2 IEC 61482-1-1 ELIM 11 CAL/CM² and EN 13034 Type PB (6).
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Connection joint for expiration valve for full face masks of the 6000 series 3M.
Bag for Peltor Headset. No PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
3M ™ Secure Fit ™ 3700 with amber PC lens and adjustable temples. Pressure Diffusion Temple technology (PDT) helps distribute pressure over the ears for a secure and comfortable fit. The Scotchgard ™ Anti-Fog Coating prevents the glasses from fogging for longer than usual anti-fog coatings and also contains an anti-scratch coating. Lens marking: 2C-1.2 1 FT KN.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
The 3M™ Peltor™ WS LiteCom Pro III ATEX helmet earmuff is a high-performance hearing protector with a built-in communication radio f or cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Replacement plugs for 3M™ PELTOR™ TEP, LEP en EEP. Attenuation: 23dB. Not separately tested as PPE.
Holster to fit virtually any hand-held radio, mobile phone and many other devices. With clip2loop coil tether and micro D-ring. No PPE.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Sold per pack of 10. No PPE.
