BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Flame retardand coverall with: Lay-flat collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched pockets 1 loop for gas detector 1 ruler pocket 1 back pocket with flap closed by concealed press studs 2 side slits Round inset sleeves Sleeve narrowing by press studs. Quality: 99% FR cotton + 1% AST; ± 340 g/m². Available sizes: 44 - 64 EU Available colours: Navy.
Light flame retardant shirt with Hi-Vis accents and reflective striping. Concealed press stud fastening on the front. Includes limited protection against chemical splash. Chest pockets with flaps. Completely metal-free. Available colors: Navy / Yellow and Gray / Yellow, 160g / m². Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 20471 Class 2 and EN 13034 Type PB 6, TRANEMO SKINSAFE (ARC RATING: 5.8 cal / cm²) .
Flame retardant and anti-static jcket in Bizflame Plus 99% cotton / 1% AS (350g / m²). Closure with press studs, 2 breast pockets with flaps and press studs, 2 side pockets with flap and press studs, radio loop, reflective striping, adjustable cuffs with velcro. Quality: Bizflame Ultra 340g. Available sizes: S-3XL. Available colors: Navy and Orange. Conforms to: EN ISO 11612 A1 + A2, B1, C1, E2, F1, EN ISO 11611 class 1 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 1 and EN 13034 Type PB [6 ].
Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.
Both sides with an inorganic high temperature coating. Free of asbestos. Suitable for welding and grinding work. All-round welding blanket. Short-term temperature resistance up to 750°C. Approved according to EN13501-1.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings). For applications where the victim must be located indoors on the basis of GPS, this device is fitted with the option of SRD which enables communication using beacons that can be supplied separately. Atex version II 2G Ex ib IIC T4 Gb
Foldable mask, class P2, for harmful dust bulk packing. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. NPF: 10.
A filling according to guidelines 2016, including color guide.
Sandal in microfiber with a steel toe cap. Outsole in PU, including ESD. Antislip SRC and choc resistant.
Crowd control helmet made of glass fiber with fire retardant gel coat layer, shock inner lining in PU, 3mm thick pc visoer with anti-mist treatment, neck guard is coverd with flame retardant textile and is attached with press buttons on the inside of the outher shell. The helmet has 7 ventilation holes through the outer shell. The inner liner can be removed whitin seconds and does not absorb any liquids. The chin strap is constructed to be easy to adjust, close and open all with duty gloves on. The chin cup is big enough to make sure that the helmet stays in position during fights.
Multinorm polo Dronten with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Cuffs at end of sleeves; Vertical reflective stripe on the sleeve. Quality: Protex® + Lenzing FR + para-aramide + AST; ± 220 g/m². Available sizes: S-5XL. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 5,5 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Work jacket Taltiu: - rounded back; - raglan sleeves; - multipocket; - reflective accents. - stretch elements M-Move - Industrial laundry 75°C Quality: 65% recycled polyester, 35% Lyocell cotton, 260 g / m². Color: Gray / black and gray / yellow. Sizes: 42-88 BE.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEKHgP3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia and its derivates, mercury vapours, dusts, mists and fumes. Suitable for ATEX environments.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
Softshell haute visibilité 403021 : poignet côtelé connectable; sacs scellables; Col bomber côtelé; Dos allongé. Tailles disponibles : XS-6XL. Coloris disponibles : jaune fluo/marine, orange fluo/marine, rouge fluo/marine. Conforme à : EN ISO 20471 Classe 2.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
This flame-retardant lining is fit for the Heflin rain jacket. The lining is made of 100% polyester with zip closure and slitopening to inside pocket of rain jacket. Available colors: navy.
Hi-Vis work jacket. Zipper with press studs. Extended back. Chest pockets with flap. Key ring under the flap of the right breast pocket. Vertical zip pocket. Sleeve pocket. Side pockets. Adjustable waistband and cuffs. Two inner pockets. Quality: 54% cotton / 46% polyester, 260 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XS-4XL. Complies with: EN ISO 20471 class 2.
Women's softshell with zipper, 2 set-in side pockets with zipper, 2 set-in chest pockets with zipper, of which the right breast pocket has a D-ring for badge holder, pen pocket on sleeve, adjustable waist by means of a zipper. drawstring, breathable, windproof and water repellent, sleeves adjustable by means of adjusters velcro, storm flaps, extended back, reflective piping, chin protector. Quality: 92%/8%, 100%, 100% | polyester/elastane, PU membrane, polyester | 3-laminate | 320gr/m². Available sizes: XS-4XL. Available colours: Indigo Blue and Charcoal Gray.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal.
Breathing hood in Tychem 2000 together with a bump cap and breathing hose. To combine with the motorunit PX5 or with compressed air system.
Flame retardant Hi-Vis ladies shirt with extra visibility. Non-Metal. Concealed front closure with plastic press stud closure. Chest pockets with flap. Adjustable cuffs. Available colours: Navy/Fluo Yellow. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 D1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2 CL.1, ARC RATING: 10.5 cal/ cm².
Unisex sweater ESD in accordance with IEC 61340 - 4 - 9:2016.
Synthetic combat glove, with kevlar protection elements on the knuckles and ventilation on the top of the finger. Water resistant, Touch screen on the palm and all fingers. Chrome free. Suitable for public order and police services. Sizes: 7-12. Complies with: EN388:2016 3.1.3.2.X.P, EN407 X.1.X.X.X.X
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Filter holder.
Fully inflatable life raft for 6 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 397 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 20.5 kg.
Lightweight and quick to deploy shelter. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions: 400x400x250cm. Weight: 58kg.No PPE.
Hygiene set for hearing protector VERISHIELD VS130D/VS130M
Charging cradel with charger for 5 led lenser lamps. No PPE
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
Constructed with a rough-finish triple-dipped PVC coating, this chemical protection glove prioritizes wearer safety and comfort. A seamless, soft cotton liner wicks away moisture to prevents odours, and the ergonomic design reduces hand fatigue. The rough grip offers high-performance precision in greasy or damp environments. Sizes: 9(L)-11(XXL). In line with EN388:2016 4.1.2.1.X, EN ISO 374-1:2016 Type B: JKL
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The new 3M™ PELTOR™ ComTac™ VII headset is designed to allow for dual hearing protection. It can be used in combination with 3M™ PELTOR™ TEP-300 earplugs, or passive earplugs. A new headband design helps to make transition between rail mounted systems and headband easier. It can also help to improve comfort when worn under a ballistic helmet. Natual Interaction Behavoiur (NIB), helps to improve close range face-to-face communication in steady state noise environments.
Utilizing near field magnetic induction, the 3M™ PELTOR™ System Control Unit helps to improve cable management through cord-free connection to the 3M™ PELTOR™ ComTac™ VII Headset, and 3M™ PELTOR™ Tactical Earplugs, TEP-300. There is also a port for an optional wired connection to the 3M™ PELTOR™ ComTac™ VII Headset. The SCU is equipped with three com ports for radios and intercom systems, and is designed to handle multiple radios with multiple channels. The SCU is also available with Bluetooth® technology. The SCU can be remotely operated via a wireless remote control unit (RCU). It is designed to be mounted on a picatinny rail, but can be placed elsewhere. Besides using the remote as a push-to-talk PTT, it can also be used to adjust the volume level of the environmental listening or radio. No PPE.
Flame retardant jacket E2274-106: Spread collar Closure by 5 covered snap buttons 1 patch breast pocket One inside pocket on the right 2 lower patch pockets with flaps Turned-back cuffs Wider flaps. Composition: 52% cotton, 38% type-F acrylic, 10% satin flame-retardant viscose - 340 gr/m². Available sizes: 0-6 FR. Available colours: Navy. Complies with: EN ISO 11612 A1/B1/C1/D2/E2/F1 and EN ISO 11611 class 1.
Earmuff WS Alert XPI with built-in FM radio receiver, Bluetooth and level dependent function (surround). The Bluetooth® Multipoint Headset with Noise Canceling Microphone connects to a mobile app to make it easier to set up and customize the headset while wirelessly connecting two Bluetooth devices, such as a cell phone and a walkie-talkie. The headset helps protect you from dangerous noise, but also makes it easy to use both hands free on the phone in noisy environments. SNR: 30dB. In accordance with: EN352-1.
Multinorm bib and brace Viana: Front fly with zipper; chest pocket with zip closure; 2 patched slanted pockets; 1 back pocket; 1 patched thigh pocket; 1 ruler pocket; 2 side slits; Knee pockets; 2 elasticated adjustable braces; Bib in front and back; Closure by 2 hidden buttons at the sides. Available sizes: 44-64R. Available colour: Hi vis orange/navy.
Women's inherently flame retardant T-Shirt with increased visibility and 20% recycled cotton. Round neck. With heat seal reflection. Quality: Cantex Jersey AT, 180 gsm. Available sizes: S-2XL. Available Color: Navy/Yellow. Complies with: EN ISO 14116 and EN 1149-5.
Arm protection for riot police forces. Sizes: 0 (XXS-S) / 1 (M-L) / 2 (XL-XXXL)
Lithium 3 V battery (CR2450) for welding filters. No PPE.
To use with rescue harnesses, allows the victim to be pulled out of the manhole in vertical position.
Glasses with grey polycarbonate duo-lens, equipped with supravision coating. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: lime/anthracite.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate CBR23 lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
Sporty goggles, OTG compatible and very wide panoramic view. Frame colour: back/grey. Fitted with CBR23 polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Low shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with breathable liner in 3D-textile. UTURN closing system. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Belt in blue leather. Adjustable to max 115cm.
The 3M™ Premium 4 Point Chin Strap X5-P4PTCS2 has a magnetic buckle and features an exclusive selector function to switch between EN397 or EN12492 safety standards. No PPE.
The serrated blade retracts automatically after the cutting movement, is suitable for left and right handed people. With safety lock both to close and to fix at a cutting depth of 6mm. Cutting depth 22mm, easy blade change.
TYVEK® IsoClean® Gown option 00 Bulk ( Bulk Packed) Serged seams. Bound neck with ties. Knitted Cuffs. Bound ties originating at center front waist. White. Available sizes: M and 2XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
TYVEK® IsoClean® hood with ties. option MS Clean-processed and gamma-sterilized. Bound seams. Bound hood opening for low particle shedding. Full face opening. Ties with loops for adjustable fit. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B CLEAN PROCESSED + STERILE.
Tyvek® IsoClean® IC183B TS Coverall Bound seams, bound neck, raglan sleeves. Covered elasticated wrists and ankles. Single packed. White. Available sizes: 2XS - 7XL (2XS, XS, 4XL, 5XL, 6XL <(>&<)> 7XL are made to order. Terms <(>&<)> conditions apply.) For cleanrooms up to ISO 5, GMP A/B. STERILE ONLY.
Coverall – CTL428CM • Zipper closure • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Available sizes: S - 3XL For cleanrooms ISO 4-6 CLEAN MANUFACTURED AND NON-STERILE
Boot Cover – CTL903CMP • Tunneled elastic top • 19" high • Non-skid vinyl sole Pack: 50 pair Available sizes: SM/ LXL/ 2XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND NON-STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
Multifunctional safety helmet for working at heights and rescue work. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
That sustainability goes hand in hand with visibility and protection shows the Birkum. This hi-vis rain jacket is designed with attention for efficient use of resources and attention for its recyclability. Not only recycled raw materials are used but the jacket has also been designed for easy disassembly. This sustainable jacket protects the wearer also against the effects of precipitation as it complies to the highest class of the latest EN 343 standard. Exterior Straight collar Detachable hood with chin protection Zip closure under flap with touch <(>&<)> close fastening 1 inset chest pocket 2 slanted inset pockets with flap and touch and close fastening Round sleeves Sleeve narrowing by touch and close fastening Segmented reflective striping (50 mm) Fabric 100% Recycled polyester + TPE laminate; ± 190g/m² European Standards EN ISO 20471 : 2013 +A1 2016 / Class 3 EN 343 : 2019 / Class 4-4-X EN ISO 13688 : 2013
