BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Breathing hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Anti-fog spray (100ml) with microfiber wipes. You can use the kit 2000 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
Your ear defenders are always close to hand with the neck cord. The clothing clip reduces the chance of losing your ear defenders. C omfortable due to soft silicone material. Safe because the cord is released from the ear defenders if it catches on something. Easy to attach and remove from your ear defenders.
Earmuff WS Alert X with Bluetooth and level dependent function (surround). The Bluetooth® headset with noise-cancelling stick microp hone connects to your mobile phone for hands-free calling and streaming in noisy environments. The headset helps protect you from dangerous noise while promoting your situational awareness through the level-dependent function for listening to the environment. The headset also syncs with a mobile app, allowing users to easily set up and customize the headset. SNR: 30dB. In accordance with: EN352-1.
Hi-vis trousers 6531: • trousers in easycare material; • nail pockets; • two back pockets with flap and velcro closure; • ruler pocket and knife button; • adjustable knee pockets; • extra reinforcement on the nail pockets, ruler pocket and knee pockets. Quality: 80% polyester, 20% cotton 245 g/m².
The Magna-Grab is a multi-purpose, multi-use magnetic tool for magnetic material handling and retrieval. The Magna-Grab comes with an eye bolt in the handle so it can serve as an effective tag line anchor point where one may not exist. When a tag line is attached it can also be lowered down into hard-to-reach areas for retrieval of dropped steel objects 100 lbs or less.
Inherently flame retardant women's work trousers with stretch for more comfort during work that requires optimal freedom of movement. Completely metal-free. Reinforced fly and stretch in the crotch area. Side pockets. Cargo pocket with flap, telephone pocket, pen pockets and concealed key ring. Ruler pocket with reinforced bottom. Pre-shaped knees with height-adjustable knee pockets on the inside. Stretch at the back. Back pockets with flap. Quality: Tera TX, 260 gsm. Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm².
Flame retardant long underpants for women. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 4.6 cal/cm² ATPV: 5.3 cal/cm².
The 3M™ Premium 4-Point Chin Strap X5-P4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a magnetic buckle and replaces worn or damaged parts. No PPE.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Innovative concept, the contents of the cabinet are dried and treated antibacterially (odors, bacteria, etc) by using UV light that generates ozone. 120cm wide cabinet, suitable for 8 to 12 complete outfits (8 clothes hangers, 4 holders for 2 pairs of gloves each, 8 holders for 1 pair of shoes/boots each, 1 grid for accessories and 1 charcoal filter.
Cleanroom goggles, OTG compatible and very wide panoramic view. Autoclavable. Frame colour: transparant. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Clean coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Circular work sock. The comfortable terry footbed provides optimal comfort. You don’t feel the toe seam. The reinforced heel and toe are added for protection and longer lifetime. Composition: 39% Recycled cotton, 31% Recycled polyester, 24% Polyamide, 6% Elastane. Sizes: 35/38, 39/42, 43/46, 47/50.
Safety glasses with CSP polycarbonat lenses and orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Innershoe, which consists out of a multi-layer textile with membrane. Membrane absorbs wound exudate and doesn't transmit it to the outer shoe. Is white for discovering wounds. Less seams, removable and washable at 60°C. Sizes: 40-48.
Belt in black leather. Adjustable to max 115cm.
Red weatherproof metal storage box for premium fire blanket for electric vehicle with maximum size of 7x8m. Dimensions: 90cm x 45cm x 30cm.
Face shield in grey polycarbonate, length 340mm. For use on EVO5 safety helmets. Marking: 1 B 8-2-2.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. The Premium blanket can be used multiple times. Transport bag included.
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
The Evercushion® Custom Fit footbed combines comfort with fit. It is available in three variants, each with a different anatomically shaped arch. The breathable PU foam provides excellent shock absorption and excellent climate control. The antibacterial Hypro Odor Control® coating prevents unpleasant odors. No PPE.
Tyvek® IsoClean® IC 729S WS Bouffant Elastic headband. Packed in a dual barrier validated packaging system (double bagged). White. Available sizes: one size For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.
Coverall – CTL428CS • Zipper closure • Attached hood • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Case Pack: 25 Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Work jacket with chest and side pockets. Fleece lining in the collar. Zip up to the collar with storm flap and chin guard. Adjustable cuffs with velcro. Fluo fabric over the shoulders with reflective bands. Reflective piping on the front and back. Extended back. Quality: 65% Polyester, 35% Cotton, 245 g/m2. Available colours: navy/yellow, black/yellow Available sizes: XS-4XL.
Device for practicing the use of the self-rescuer M20.2 Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Extra mouthpieces available as an accessory.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Charger as accessory for motor unit Clean air Chemical.
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström air hoods and the compressed air hose.
Filter holder including strap to carry the filters of the half mask on the back, making the mask more compact and can be worn, for example, under a face shield.
PVC belt for remote filter holder (1058602).
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with hood and increased visibility.
The Zoll AED 3 is a fully automatic device that is monolingual.
Sustainable high-vis trousers for women made of lightweight organic cotton and recycled polyester. Rib-knit stretch panels at the waist.
Magnetic charging cable for connection E-B10 and USB-C for connection of charger.
Includes the smart-fix cover for the E-WG200 and the neck strap with double attachment. No PPE.
Medium-sized and powerful worklight with up to 4000 lumens, 5 brightness levels and 5-step adjustable white light. Reduces glare thanks to multi-concentrated light technology. Hybrid lamp operates on both a powerful rechargeable battery and mains power. High water and dust protection (IP67), robust aluminium housing and flexible mounting. Equipped with a magnet, memory function and transport lock, resistant to certain chemicals.
Rechargeable torch with quality light and focus function, natural light (CRI 80) for true colour reproduction and less eye fatigue. Intuitive operation, fully dust- and waterproof (IP68) rechargeable with USB-C. Sustainable housing : 75% recycled aluminium. 2000 lumens, 320m range. Includes: pouch, wrist strap, rubber protection and charging station.
Even a step beyond the Gravity Zero 9191, which feels light, is the Super G 9172: truly the lightest safety glasses: just 18 grams. The lens, moulded with increased injection pressure, is noticeably thinner yet provides the same protection as other Uvex lenses as well as identical, optimal optical properties. UV400 protection, soft temples (DCT). The clear polycarbonate lens features the Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Fall arrester for use on Söll fall-protection rails. Can be attached to rail at the beginning of the climb. Moves with the person ov er the rail and stops any fall immediately. Must be connected to the chest anchor point of the harness.
Wire mesh visor for Commander shot blasting helmet. To be placed between basic glass lens and PC lens for added protection.
Automatic welding filter in shade 8-12 for 100 series (compatible with 3M H751100).
Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 121liter. Suitable for: general industrial applications.
Sign within GHS normation in self adhesive polyester: explosive. Size: 100x100mm. 4 labels per card. No PPE.
Neck cape for Pyroshelmet in Aluminium. No PPE.
Sweat band for hoods from S-600 and S-700 series, and for S-950.
Intervention kit for spilled liquids. Includes everything you need: Absorption Material for the removal of any oil, gloves and waste bags for disposal of used sorbents. Compact: Requires little storage space, fits easily behind or under the seat of a truck. Please note that this kit was created as best practices only and does not comply with ADR legal requirements.
Adaptor to "park" lung demand valve Automaxx AS when not in use. Can be fixed on belt of bretahing apparatus.
Visor in metal mesh with edging in metallised tape, to be combined with SCR CARRIER HELMET ALU FR CENTURION for a perfect fit on the Centurion Vulcan helmet. It shields the face from radiant heat. Size: 500x250mm.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Replacement plastic sweatband suitable for use with all Peltor safety helmets. Not saparately tested as PPE.
White/transparant safety goggles with adjustable silicone headband. With clear polycarbonate lenses covered with an antifog and supravision CR coating. Offers an excellent panoramic field of view. Band contains silicone. This CR model has been manufactured for repeated autoclavable sterilisation (up to 10 times). Perfect for use in clinics, laboratory, cleanrooms and food manufacturing.
Polycarbonate replacement visor, for the Idra 2 helmet.
Red steel fire blanket cabinet (Dimensions: 220 x 289 x 1680 mm).
Set of ballistic spectacles. Case is supplied with 3 PC lenses: clear, smoke and CSP. Srtap is also supplied inside the case. Lenses have a PLATINUM coating: anti-scratch and anti-fog on both sides. Adjustable nose bridge. RX insert availble separately.
Adapter for mounting winch advanced on DBI-Sala davit masts.
High shoe in black microfiber/textile. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
