BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Plastic spill tray with grid. Capacity: 43 litres. Weight: 7kg. Dimensions: 800x605x170mm.
Outdoor cabinet Rotaid Solid Plus with alarm. Suitable for the following AEDs: Primedic HeartSave Y semi-automatic (1060424), Primedic HeartSave YA fully automatic (1060425), Zoll AED Plus semi-automatic (1060426), Zoll AED Plus fully automatic (1060427), Zoll AED 3 semi-automatic (1060428) and the Zoll AEd 3 fully automatic (1060429). Outdoor cabinet seal 10 pieces (1040730).
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 0: operating voltage 1000V, test voltage 5000V, special properties R (acids, oil, ozone) and C (low temperatures) .With 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-12.
Hygiene set for Peltor X1 earmuff
Ergonomically styled Cutter for use with plastic sheeting and foamed material. For use by right- and lefthanders. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. Replacement blades: 1014310
100% heavy brushed cotton, 260gr / m². Preformed flap with contrasting piping. Adjustable closure with a silver metal buckle.
High shoe in black nubuck leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39- 47.
Eye-catching, signal red galvanised 20L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Window & door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Bio Hazard waste kit: Contents: 1x decontamination spray 60ml, 2x cloths, 1x antiseptic swab, 1x pair of gloves, 1x apron, 1x scoop, 1x bag of absorbent granules, 1x bag Bio-Hazard.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 41/42.
Elastic bandage white 5cmx4m. Individually wrapped. An elastic gauze, edged bandage which has excellent flexibility due to the use of polyamide/viscose yarns. Stellastic is recommended for securing bandages due to its flexibility.
Apron, 100% cotton, 260gr/m², with bib, big pocket, 100*100cm.
Bottle of 110 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
The Fall Arrest SOLAS 300N is a two chamber life-jacket developed for use with and attachment to fall harnesses. Suitable for use on the open sea and under all circumstances, including extreme weather and when wearing heavy, waterproof, protective clothing. The jacket stays put and keeps the airways clear of the water. Incl. 2 leg straps. Material: Clean wipe PVC. Also available in yellow and black PVC and in Cordura black, blue and red. Solas approved.
Safety line 1.5 metre made of kernmantle rope with integrated shock-absorber Serves as connection between anchor point and harness.
Safety ashtray Material: Stainless steel Colour: Black powder coated Removable inner tray Dimensions: Ø 290 mm x H 1000 mm Weight: 5.5 kg Dimensions: 965mm x 305mm
Set of 25 quick rings with diameter of 3,8cm for tools with maximum weight of 0,9kg and that have pre-drilled holesin them. No PPE.
The 3M™ DBI-SALA® Utility Pouch is constructed from heavy-duty 22 oz. duck canvas and features two side ears that are designed to hold spud wrenches and sleever bars. Two inner pockets are included in the pouch for additional tools. Tools can be tethered to two D-rings on the front of the pouch, or to an additional D-ring inside the pouch.
Unique sleeve design conforms to the size of virtually any drill battery.Sleeve is cinched to the drill, allowing the drill to be tethered off while being used at height.
Flame retardant and antistatic poloshirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). Press-stud closure, long sleeves, stitched seams, very soft and moisture regulating properties. Available sizes: S-3XL. Available colours: navy, grey.
Ergonomic plastic and foam cutter. Suitable for right and left-handers. The Teflon-coated metal foot is very strong and even resistant to hard and thick foils (no wear and tear). Easier to change blades than COUPPY, SNITTY, and MOBILEX. "GS tested for safety". OPTICUT No. 434: Base is placed differently, for pushing cutting motion. Includes lateral protection that supports the plastic spring when shielding the blade. Replacement blades: 1014310
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
Lock out carry case made of 600 denier polyester. With a removable 95cm shoulder strap. Contains 8 compartments. Not PPE.
Orange first aid kit with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with A-guidelines + extra accessories*, Resc-Q-Assist Colour System, colour guide, wall holder*. Extra accessories: safety blanket, Burnshield burn compress and eyewash bottle. Version: in line with A-contents. Dimensions: 445x320x150mm Content also available separately (Art: 1031057)
Inox scissors (31cm) for cutting fabric or paper. Does not cut in skin.
StokoDerm Silicone Free Hand Cream for protecting and conditioning skin combat occupational skin disease, the second largest nonfatal occupational illness. StokoDerm® is ideal where both oil and water hazards are present. It contains the skin protective against, Eucoriol® for rough, dry hands. Content: 100ml. Old name: Stokoderm Grip Pure 100ml
4-points cradle with sewn in PVC sweatband
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Thermal undershirt in 100% polyester (140g/m²). Keeps the body dry and cool. Round neck, tricot cuffs. Available sizes: S-4XL. Available colours: black, grey anthracite.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Storage bag for V-Gard 900.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. Is has a quick and easy adjustment.
Half face mask designed to work to complete the Claenspace PAPR systems. Compatible with all Cleanspace Respirators. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Cleanspace P3 filter suitable for all Cleanspace PAPR power units.. Set of 3 filters. Weight: 21g.
Safety glasses in grey polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (40g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Fits over most prescription glasses.
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Cederroth Burn Kit with: 1 x Burn Gel 100 ml (REF 51011005) 1 x Burn Gel Dressing / Face Mask 30x40 cm (REF 51011014) 2 x Burn Gel Dressing 20x20 cm (REF 51011015) 4 x Burn Gel Dressing 10x10 cm (REF 901900) 1 Cederroth 4-in-1 styptic bandage (REF 1910) 1 x mounting mesh 6 x elastic fixation bandages 2 pairs of gloves 1 x scissors (REF 270002) First aid and burn instructions. Dimensions: W31 x D 8 x H 25 cm.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evolution® range.
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Cover for expiration valve for full face masks of the 6000 series of 3M.
Suspension I/79G-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ber. Not separately certified as PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values HCN: 1,0-4,7ppm.
Protective eye shield for Kask helmets Plasma, Superplasma and HP. Easy to install. Sratch- and fog-resistant.
I-Beam anchor trolley width 80 to 250mm for 1 person. Maximum weight: 136kg.
Cederroth First Aid Kit Small. The case is made of durable nylon, which protects the equipment from dirt and dust. A practical Velcro fastener makes it quick and easy to open the kit. You can carry this small, handy kit in your pocket or attach it to your belt with straps. All products come with clear, self-explanatory instructions. Dimensions: W 145 x H 74 x D 51 mm. Content: 1 Cederroth 4-in-1 Bloodstopper (REF 1910), 6 Salvequick Plasters (REF 1880), 2 Salvequick Maxi Covers (REF 658024), 2 Salvequick Wound Cleansers (REF 1880)
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
Antistatic insole. Very good moisture absorption and release properties, shock-absorbing and comfortable, breathable, durable. The insole allows users to adjust space in the shoe to a narrower fit that fits narrow feet. Sizes: 35-49. No PPE.
Comfortable hi-vis work clothing designed for ladies. This jacket with ARC protection, made of a breathable, non-allergenic flame-retardant fabric with moisture-regulating properties, features double-stitched reflective FR strips for increased visibility. The sleeves can be narrowed to protect your arms and with four pockets on the outside and one on the inside, this tailored jacket is not only beautiful but very practical, too. Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m². Available sizes: C36-C52 Available Colours: Fluo yellow/ navy.
Lined beanie in single jersey: Quality: 95% cotton 5% Spandex (black). 60% polyester, 33% cotton, 7% spandex (yellow / orange). Available sizes: Universal. Available colors: Sky blue, forest green, black, navy, orange, yellow / navy, gray and red.
Bretelles sylviculture en 65% polyester / 35% coton (85g / m²). 6 couches protection anti-coupure. Braguette avec fermeture à glissière, 1 poche plaquée sur le pli et système de fixation de la clé de la bougie, fermeture à glissière et bouton sur le côté droit, taille élastique à l'arrière 2 bretelles élastiques réglables avec fermeture à boucle, haut de poitrine avec poche avec fermeture à glissière verticale à droite, coutures à 3 aiguilles à l'arrière. Couleur disponible: orange fluo / noir et jaune fluo / noir. Tailles disponibles: S-4XL. Conforme à: EN 381-5 classe 1 et EN ISO 20471 classe 2.
The flame retardant and anti-static Belarto is a 3-layer softshell that is perfectly windproof, yet breathable. The softshell, with a standing collar, protects you against the cold. If you get too hot, you can take off the sleeves. The Belarto has on the outside one inset chest pocket and two inset pockets on the side, all with zippers. Inside there is a pocket for storage. The softshell has been fitted with sleeve narrowing with touch and close fastening and narrow reflective FR strips on the arms and chest: Straight collar Zip closure under flap with touch <(>&<)> close fastening 1 inset chest pocket with zip closure 2 inset pockets with zip closure Detachable sleeves Sleeve narrowing by touch and close fastening Flame retardant reflective tape (25mm) Back length 75 cm (L). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colours: Navy.
Touch Free Dispensing System, there's nothing to touch. Just place hands below. No batteries included (4xC battery). Refill: 1049022,1049024
Leather case for Twig One Atex with transparent front and simple to use swivel belt clip mechanism to use either in vertical or in horizontal position.
Welding curtain in self-extinguishing matte green PVC in Robusto single frame, for indoor use. Frame with 4 swivel castors, 2 of which have brakes. Height: 180 cm, width: 220 cm, curtain thickness: 0.4 mm. In accordance with EN15998.
A very practical first-aid kit. In the emergency first-aid kit small Basic, a color guide can be found that identifies various injuries. For each injury it is clearly indicated which first aid should be provided (including wall bracket).
Long coat for women with concealed press stud fastening and 2 front pockets on the inside. Quality: 65% / 35% | cotton / polyester | 2/1 twill weave | 290gr / m² Available sizes: 36-56 HAV Available colors: White.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Perforated safety sandal in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Multinorm softshell 5195 with arc flash protection, concealed front zip and double storm flap with press studs. Chest pockets with zip. Side pockets with zipper. Cuffs on the inside of the sleeves. Drawstring at the bottom of the jacket. Comfortable heat seal reflection. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: XS-4XL. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612: A1 B2 C2 F2, IEC 61482-2: APC 2 (40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034: TYPE PB[6], EN ISO 20471: CL.2
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Working in extremely cold conditions? With the Cottier hood, you are neatly tucked in. This freezer hood with high-tech insulating thermal lining protects you against temperatures down to -40 °C. In addition, your ears are well hidden by the extra insulation.
